Käyttöohje Clas Ohlson EB161H Henkilövaaka

Käyttöohje

Svenska

SVERIGE • kundtjänst tel. 0247/445 00 e-post [email protected] internet www.clasohlson.se brev Clas Ohlson AB, 793 85 INSJÖN

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and

Imperial (pounds, stones), you can convert weight unit as follow:

Condition 1:

if the unit switch is inside battery

case,

A. Open battery case cover on the back

of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 1,

A. Take out the used battery with the aid of a

cuspidal object, as shown in picture 1.

B. Install new battery by putting one side of the

battery beneath the battery baffle and then

pressing down the other side.

Please take note to the polarity.

Step 2:

Gently step on the scale, then the scale

will be automatically turned on. Stand

evenly on the scale without moving and

wait until your weight shown on display

is stable and locked.

picture 4

Condition 4: Open battery case cover on the

back of scale, if battery case is the

type shown in picture 4,

A. Take out the used batteries (with the aid of a

cuspidal object, if needed)

B. Install new battery by putting one side of the

battery and then pressing down the other side.

Please take note to the polarity.

OPERATION

Type 1

:

3V lithium batteries(CR2032).

Please remove the isolation

sheet from the battery contact

before use.

Type 2: 1.5V AAA batteries (excluded)

Step 1:

To make sure accuracy, place the

scale on a hard, flat floor and avoid

carpet or soft surface.

Remark: If the scale is one of our "slim" series

(indicated on package), make sure to put it on

hard surface such as marble, floor tile etc., and

make sure no foreign bodies beneath the scale

before weighing.

CR2032

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically

switch off. Auto shut-off occurs if display shows

stable weight reading for approximate 8 seconds.

Condition 2

:

Open battery case cover on the

back of scale, if battery case is

the type shown in picture 2,

A. Pull the black tab outwards and the battery

will come out.

B. Install new battery by putting one side of

the battery beneath the contact and then

pressing down the other side. Please take

note to the polarity.

CR 2 0 32

black tab

contact

picture 2

Unit button

Condition 3:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

is power on, LCD shows current weight unit.

Press the button again to convert weight unit.

picture 3

Condition 3: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 3,

A. Press battery gently, the battery will pop up

automatically.

B. Install new battery by connecting one side of

battery to the positive plate first, and then

pressing down the other side. Please observe

the polarity.

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and

Imperial (pounds, stones), you can convert weight unit as follow:

Condition 1:

if the unit switch is inside battery

case,

A. Open battery case cover on the back

of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 1,

A. Take out the used battery with the aid of a

cuspidal object, as shown in picture 1.

B. Install new battery by putting one side of the

battery beneath the battery baffle and then

pressing down the other side.

Please take note to the polarity.

Step 2:

Gently step on the scale, then the scale

will be automatically turned on. Stand

evenly on the scale without moving and

wait until your weight shown on display

is stable and locked.

picture 4

Condition 4: Open battery case cover on the

back of scale, if battery case is the

type shown in picture 4,

A. Take out the used batteries (with the aid of a

cuspidal object, if needed)

B. Install new battery by putting one side of the

battery and then pressing down the other side.

Please take note to the polarity.

OPERATION

Type 1

:

3V lithium batteries(CR2032).

Please remove the isolation

sheet from the battery contact

before use.

Type 2: 1.5V AAA batteries (excluded)

Step 1:

To make sure accuracy, place the

scale on a hard, flat floor and avoid

carpet or soft surface.

Remark: If the scale is one of our "slim" series

(indicated on package), make sure to put it on

hard surface such as marble, floor tile etc., and

make sure no foreign bodies beneath the scale

before weighing.

CR2032

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically

switch off. Auto shut-off occurs if display shows

stable weight reading for approximate 8 seconds.

Condition 2

:

Open battery case cover on the

back of scale, if battery case is

the type shown in picture 2,

A. Pull the black tab outwards and the battery

will come out.

B. Install new battery by putting one side of

the battery beneath the contact and then

pressing down the other side. Please take

note to the polarity.

CR 2 0 32

black tab

contact

picture 2

Unit button

Condition 3:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

is power on, LCD shows current weight unit.

Press the button again to convert weight unit.

picture 3

Condition 3: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 3,

A. Press battery gently, the battery will pop up

automatically.

B. Install new battery by connecting one side of

battery to the positive plate first, and then

pressing down the other side. Please observe

the polarity.

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and

Imperial (pounds, stones), you can convert weight unit as follow:

Condition 1:

if the unit switch is inside battery

case,

A. Open battery case cover on the back

of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 1,

A. Take out the used battery with the aid of a

cuspidal object, as shown in picture 1.

B. Install new battery by putting one side of the

battery beneath the battery baffle and then

pressing down the other side.

Please take note to the polarity.

Step 2:

Gently step on the scale, then the scale

will be automatically turned on. Stand

evenly on the scale without moving and

wait until your weight shown on display

is stable and locked.

picture 4

Condition 4: Open battery case cover on the

back of scale, if battery case is the

type shown in picture 4,

A. Take out the used batteries (with the aid of a

cuspidal object, if needed)

B. Install new battery by putting one side of the

battery and then pressing down the other side.

Please take note to the polarity.

OPERATION

Type 1

:

3V lithium batteries(CR2032).

Please remove the isolation

sheet from the battery contact

before use.

Type 2: 1.5V AAA batteries (excluded)

Step 1:

To make sure accuracy, place the

scale on a hard, flat floor and avoid

carpet or soft surface.

Remark: If the scale is one of our "slim" series

(indicated on package), make sure to put it on

hard surface such as marble, floor tile etc., and

make sure no foreign bodies beneath the scale

before weighing.

CR2032

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically

switch off. Auto shut-off occurs if display shows

stable weight reading for approximate 8 seconds.

Condition 2

:

Open battery case cover on the

back of scale, if battery case is

the type shown in picture 2,

A. Pull the black tab outwards and the battery

will come out.

B. Install new battery by putting one side of

the battery beneath the contact and then

pressing down the other side. Please take

note to the polarity.

CR 2 0 32

black tab

contact

picture 2

Unit button

Condition 3:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

is power on, LCD shows current weight unit.

Press the button again to convert weight unit.

picture 3

Condition 3: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 3,

A. Press battery gently, the battery will pop up

automatically.

B. Install new battery by connecting one side of

battery to the positive plate first, and then

pressing down the other side. Please observe

the polarity.

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and

Imperial (pounds, stones), you can convert weight unit as follow:

Condition 1:

if the unit switch is inside battery

case,

A. Open battery case cover on the back

of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert

scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 1,

A. Take out the used battery with the aid of a

cuspidal object, as shown in picture 1.

B. Install new battery by putting one side of the

battery beneath the battery baffle and then

pressing down the other side.

Please take note to the polarity.

Step 2:

Gently step on the scale, then the scale

will be automatically turned on. Stand

evenly on the scale without moving and

wait until your weight shown on display

is stable and locked.

picture 4

Condition 4: Open battery case cover on the

back of scale, if battery case is the

type shown in picture 4,

A. Take out the used batteries (with the aid of a

cuspidal object, if needed)

B. Install new battery by putting one side of the

battery and then pressing down the other side.

Please take note to the polarity.

OPERATION

Type 1

:

3V lithium batteries(CR2032).

Please remove the isolation

sheet from the battery contact

before use.

Type 2: 1.5V AAA batteries (excluded)

Step 1:

To make sure accuracy, place the

scale on a hard, flat floor and avoid

carpet or soft surface.

Remark: If the scale is one of our "slim" series

(indicated on package), make sure to put it on

hard surface such as marble, floor tile etc., and

make sure no foreign bodies beneath the scale

before weighing.

CR2032

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically

switch off. Auto shut-off occurs if display shows

stable weight reading for approximate 8 seconds.

Condition 2

:

Open battery case cover on the

back of scale, if battery case is

the type shown in picture 2,

A. Pull the black tab outwards and the battery

will come out.

B. Install new battery by putting one side of

the battery beneath the contact and then

pressing down the other side. Please take

note to the polarity.

CR 2 0 32

black tab

contact

picture 2

Unit button

Condition 3:

if the unit switch is on the back of

the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

is power on, LCD shows current weight unit.

Press the button again to convert weight unit.

picture 3

Condition 3: Open battery case cover on the

back of scale, if battery case is

the type shown in picture 3,

A. Press battery gently, the battery will pop up

automatically.

B. Install new battery by connecting one side of

battery to the positive plate first, and then

pressing down the other side. Please observe

the polarity.

Personvåg

Art.nr 44-3815 Modell EB161H

Läs igenom hela bruksanvisningen före användning och spara

den sedan för framtida bruk. Vi reserverar oss för ev. text- och

bildfel samt ändringar av tekniska data. Vid tekniska problem

eller andra frågor, kontakta vår kundtjänst.

Säkerhet

• Produkten är ett precisionsinstrument och ska därför

hanteras varsamt och skyddas mot stötar och annan omild

behandling.

• Placera produkten på samma plats varje gång du använder

den.

• Placera produkten på ett plant, hårt underlag för bästa

funktion. Ett ojämnt underlag ger ett osäkert mätvärde.

• Väg dig utan kläder och skor vid samma tid på dygnet, helst

på morgonen innan du har ätit. Placera fötterna på samma

ställe på vågen varje gång.

• Visningen på displayen avrundas till närmaste 100 g uppåt

eller neråt.

Batterier

1. Ta bort batteriluckan på vågens undersida och sätt i

batterier, 2 x AAA/LR03 (säljs separat).

2. Sätt tillbaka batteriluckan.

Användning

1. Placera vågen på ett

plant hårt underlag.

2. Ställ dig på vågen,

den slås på

automatiskt. När

uppmätt vikt slutar

blinka i displayen är

vägningen klar.

3. Stig av vågen när du

är klar, den stängs av

automatiskt.

4. Tryck på [Unit button]

på vågens undersida

om du vill ändra

viktenhet. Du kan

välja mellan ”kg”

(kilo), ”lb” (pound),

”st:lb” (stones).

Skötsel och underhåll

• Rengör vågen med en lätt fuktad trasa. Använd ett milt

rengöringsmedel, aldrig lösningsmedel eller frätande

kemikalier.

• Utsätt inte vågen för vatten och fukt.

• Ta ut batterierna ur batterihållaren om vågen inte ska

användas under en längre period.

Felmeddelanden som kan visas i displayen

Err Vågens maxvikt har överskridits.

Lo Batterikapaciteten är låg, sätt i nya batterier.

C Om ”C” visas när du stiger av vågen misslyckades

vägningen. Väg på nytt.

Om displayen inte återgår till normalvisning eller vågen på annat

sätt felindikerar, ta ut batterierna och vänta i 5 sek för att åter-

ställa elektroniken. Sätt sedan i batterierna igen.

Avfallshantering

Denna symbol innebär att produkten inte får

kastas tillsammans med annat hushållsavfall.

Detta gäller inom hela EU. För att förebygga

eventuell skada på miljö och hälsa, orsakad av

felaktig avfallshantering, ska produkten lämnas till

återvinning så att materialet kan tas omhand på

ett ansvarsfullt sätt. När du lämnar produkten till

återvinning, använd dig av de returhanteringssys-

tem som finns där du befinner dig eller kontakta inköpsstället.

De kan se till att produkten tas om hand på ett för miljön tillfred-

ställande sätt.

Specifikationer

Batterier 2 x AAA/LR03 (säljs separat)

Maxvikt 150 kg

Mått 300 x 300 x 20 mm

Ver. 20200514

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Clas Ohlson EB161H Henkilövaaka. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Clas Ohlson. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Clas Ohlson EB161H Henkilövaaka käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Clas Ohlson Henkilövaa'at
Lisää Henkilövaa'at käsikirjoja

Usein kysytyt kysymykset kohteesta Clas Ohlson EB161H Henkilövaaka

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Adler AD 8172w Henkilövaaka

Käyttöohje

Camry CR 8171b Henkilövaaka

Käyttöohje

Exacta FW2 Henkilövaaka

Käyttöohje

SilverCrest IAN 61488 Henkilövaaka

Käyttöohje

Salter 9106 Henkilövaaka

Käyttöohje

Emerio BR-211824 Henkilövaaka

Käyttöohje

SilverCrest IAN 96299 Henkilövaaka

Käyttöohje

Tefal PP1600V0 Henkilövaaka

Aiheeseen liittyvät luokat