Käyttöohje Asaklitt 31-8541-1 Askellaskuri

Käyttöohje

ENGLISH

UNITED KINGDOM • CUSTOMER SERVICE

tel: 020 8247 9300 e-mail: [email protected].uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

1

2

3

4

Ver. 20180921

3D Pedometer

Art.no 31-8541-1, 31-8541-2

Please read theentire instruction manual before using theproduct

and then save it for future reference. We reserve theright

for any errors in text or images and any necessary changes

made to technicaldata. In theevent of technical problems or

other queries, please contact our Customer Services.

Product description

Alarm

If you have set acertain number of steps as atarget asymbol

will appear on theleft of thedisplay. Itshows you how close to

thetarget youare. Thesymbol starts to flash when you have

reached your target. Thedefault target value for steps is 5000.

Operating modes

Thepedometer has 6 modes, listed in thefollowingorder.

Browse thelist using the [ MODE ] button.

• Step counting: “Step”

• Distance: “Km”

• Calories burned: “Kcal”

• Exercisetime: “Min”

• Memory: “Total step”

• Reset: “Res”

Step counting (Step)

Thestandard operatingmode. “Step” appears on thedisplay.

Instep counting mode thedisplay shows thetotal number

of steps taken since midnight. All daily information is saved

in thedaily memory and is erased automatically at midnight.

Accumulated data is saved in thelong-term memory for 30days.

It is possible to see the daily statistics for the past 30 days.

1. Press [ MODE ] until you come to “Step” and “Days record”.

2. Go to the day you wish to view by pressing [ RES ].

3. Browse the data by pressing [ SET ].

Distance (Km)

Press [ MODE ] to enter thedistancemode. “Km” or “Mile”

will show on thedisplay. Thereading shown is thedistance

travelled since midnight.

Calories burned (Kcal)

Press [ MODE ] to enter thecalories burnedmode. “Kcal” is

shown on thedisplay. Thereading shown is thenumber of

calories burned since midnight.

Exercise time (Min)

Press [ MODE ] to enter theExercise timemode. “Min” will

show on thedisplay. Thereading displayed is thetotal

distance you have walked/run since midnight.

Memory (Total step)

Press [ MODE ] to enter thememorymode. “Total step”

appears on thedisplay. Thereading displayed shows thetotal

accumulated data since thepedometer was lastreset.

Press [ SET ] repeatedly to retrieve thetotal data as follows:

Stepcounting/distance/calories burned/exercisetime.

Reset (Res)

There are 2 different kinds of resets: Daily reset and total reset.

• To perform a daily reset, press and hold in [ RES ] for

2 seconds whilst the pedometer is in “Step” mode.

The daily data is reset.

• To perform a total reset, press and hold in [ RES ] for

2 seconds whilst the pedometer is in “Total step” mode,

this resets all data.

Note: Allcategories are deleted by areset. Itis not possible

to reset just one singleday.

Battery replacement

1. Unscrew theretaining screw and

remove thebatterycover.

2. Remove theold CR2032 battery

and insert anewone.

3. Refit thebattery cover and tighten

theretainingscrew.

Care and maintenance

Clean theproduct by wiping it with asoft, damp cloth when

needed. Neveruse solvents or abrasive cleaning agents.

Disposal

This product should be disposed of in accordance with local

regulations. Ifyou are unsure how to proceed, contact your

local council.

Specifications

Stepcount 0–99999

Distance 0–999.999km

Time format 12/24hours

Battery CR2032

Weightrange 20–150kg

Stride length 30–180cm

Size 75×35×10mm

1. [ MODE ] Scrolls through themenu

2. [ SET ] Settings

3. [ RES ] Resets dailydata

4. [ RESET ] Resets to factory settings

Operating instructions

[ SET ]

Make settings for 12/24 clock format, seconds, hours, minutes,

date, units of measurement, stride length, weight and target:

1. Press [ MODE ] repeatedly until just “Step” appears at

thetop of the display.

2. Press and hold in [ SET ] for 2 seconds to enter clock set

mode. “Adj” will begin flashing on the display.

3. Increase values using [ RES ] and decrease values using

[ MODE ].

4. Confirm and continue to make other settings such as

thedate and units of measurement by pressing [ SET ].

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Asaklitt 31-8541-1 Askellaskuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Asaklitt. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Asaklitt 31-8541-1 Askellaskuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Asaklitt Askellaskurit
Lisää Askellaskurit käsikirjoja

Usein kysytyt kysymykset kohteesta Asaklitt 31-8541-1 Askellaskuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Asaklitt 31-8541-2 Askellaskuri

Käyttöohje

Asaklitt 34-7355 Askellaskuri

Käyttöohje

Asaklitt 34-8544 Askellaskuri

Käyttöohje

Asaklitt 31-5543 Askellaskuri

Käyttöohje

Asaklitt P071 (31-8540) Askellaskuri

Käyttöohje

Asaklitt 31-8541 Askellaskuri

Käyttöohje

Clas Ohlson 34-7357 Askellaskuri

Käyttöohje

Silva ex3 Plus Askellaskuri

Aiheeseen liittyvät luokat