Käyttöohje Steinel IS 240 DUO Liikkeentunnistin

Tarvitsetko käyttöoppaan Steinel IS 240 DUO Liikkeentunnistin? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 0 usein kysyttyä kysymystä, 3 kommenttia ja 4 ääniä, joiden keskimääräinen tuotearvio on 50/100. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

15
After the motion detector
has been connected and
fastened to its wall mount,
the system can be switched
on. Two setting options are
available after removing the
decorative ring
2
.
Twilight setting
The desired motion detector
response threshold can be
adjusted continuously from
approx. 2 lux to 2000 lux.
When the adjustment screw
is at the left stop position
1
,
this means daytime opera-
tion of approx. 2000 lux.
When the adjustment screw
is at the right stop position
6
, this means twilight
operation of approx. 2 lux.
(Factory setting is daytime
operation.) The adjustment
screw must be at the left
stop position when setting
the detection zone and for
the functional test in
daylight.
Switch-off delay
(time setting)
The desired period of oper-
ation of the light can be
adjusted continuously from
approx. 10 sec. to a max.
of 15 min. When the adjust-
ment screw is at the left
stop position
1
, this means
the shortest time of approx.
10 sec. When the adjust-
ment screw is at the right
stop position
6
, this means
the longest time of approx.
15 min. (factory setting is at
min.). The shortest time set-
ting is recommended when
adjusting the detection zone
and performing a functional
test.
Assuming an installation
height of 2 m, the maximum
reach of the sensor is 12 m.
Optimum adjustment of the
detection zone is possible
according to needs. The
shrouds
6
provided serve
to cover any desired num-
ber of lens segments and
individually reduce the
reach. Fine adjustment is
also possible by turning the
sensor housing
3
by ± 80°.
The shrouds
6
can be
divided vertically or horizon-
tally along the grooved divi-
sions, or cut with scissors
6
. After removing the deco-
rative ring
2
, the shrouds
are to be suspended on the
upper part of the sensor
lens. The decorative ring
2
is subsequently to be reap-
plied and the shrouds
6
are
fixed firmly in place. False
switching by cars and
pedestrians, etc. is there-
fore ruled out, or risk areas
deliberately monitored.
Function
Reach setting/adjustment
ca. 10 sek.-max. 15 min.
approx. 10 sec - max. 15 min
2 - 2000 lux
14
Lights, alarms, and many
other things triggered by
movement - for your
convenience and safety.
Whether a house door,
garage, patio or carport,
stairs, a storeroom or cellar
are involved, this infrared
motion detector is rapidly
installed and ready for
operation anywhere.
The IS 240 DUO motion
sensor is equipped with two
120° pyro sensors which
detect the invisible heat
emitted by moving objects
(pedestrians, animals etc.).
The heat thus detected is
electronically converted and
switches on connected con-
sumers (e.g. a light). No heat
radiation is detected through
obstacles, such as walls or
glass and no switching
therefore occurs. The two
pyro sensors have a detec-
tion angle of 240° with an
opening angle of 180°.
Area monitored
approx. 200 m
2
Reach max. 12 m
Principle
Important: the safest
motion detection is
obtained when the device is
mounted and aligned later-
ally to the walking direction
and no obstacles (such as
trees and walls, for exam-
ple) obstruct the view.
ca.5m
ca.12m
approx. 5 m max. 12 m
IS240Duo_10spr_neu 24.08.2011 14:31 Uhr Seite 15
Lataa käyttöohje suomalainen (PDF, 2.44 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Steinel IS 240 DUO Liikkeentunnistin arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Steinel IS 240 DUO Liikkeentunnistin?
Kyllä Ei
50%
50%
4 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Steinel IS 240 DUO Liikkeentunnistin:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Mr GDAIEM 20-04-2022
Hyvää iltaa En löydä yöasentoa Ei sijaintinuolta, vain numeroita cdt

vastaa | Tästä oli apual (7) (Googlen kääntämä)
[email protected] 16-01-2020
Hei; Ilmaisin ei enää havaitse mitään. Kiitos avusta

vastaa | Tästä oli apual (2) (Googlen kääntämä)
Rolf 12-09-2019
IS240 DUO -liiketunnistimeni vilkkuu vain hyvin nopeasti

vastaa | Tästä oli apual (0) (Googlen kääntämä)

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Steinel IS 240 DUO Liikkeentunnistin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Steinel. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Steinel IS 240 DUO Liikkeentunnistin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Steinel
Malli IS 240 DUO
Kategoria Liikkeentunnistimet
Tiedostotyyppi PDF
Tiedoston koko 2.44 MB

Kaikki käsikirjat kohteelle Steinel Liikkeentunnistimet
Lisää Liikkeentunnistimet käsikirjoja

Käyttöohje Steinel IS 240 DUO Liikkeentunnistin

Liittyvät tuotteet

Aiheeseen liittyvät luokat

×
Download