Käyttöohje Ryobi EJ700L Kuviosaha

Käyttöohje

2

English

GB

FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR

WARNING

Before connecting your saw to power supply source,

always check to be sure it is not in lock-on position

(depress and release switch trigger). Failure to do so

could result in accidental starting of your saw resulting

in possible serious injury. Do not lock the trigger on jobs

where your saw may need to be stopped suddenly.

TRANSPARENT GUARD

See Figure 3.

For your protection, a transparent guard has been included

with the saw. It is used to shield wood particles from the

eyes. The transparent guard is attached by placing it in

front of the blade area of the base and snapping it into the

tabs on the sides of the saw base. For removal, simply

pull the tap of the transparent guard. Make sure the saw is

unplugged before installation and removal.

NOTE: The transparent guard can only be used for

straight cutting.

TO INSTALL BLADES

See Figure 3 - 4.

 Unplug the tool.

WARNING

Failure to unplug your saw could result in accidental

starting causing possible serious injury.

 Turn the tool upside down.

 Pull the tap of the transparent guard.

 Rotate the quick release lever counter-clockwise and

hold in position.

 Insert the saw blade into the groove in the roller guide,

making sure the back of the saw blade is properly

positioned in the groove.

NOTE: Only T-shank saw blades can be used.

 Push the saw blade into the blade clamp as far as it

will go.

 Release the quick release lever.

 Install the transparent guard.

WARNING

To avoid possible serious injury, always wear safety

goggles or safety glasses with side shields. Keep hands

and  ngers away, from the motor housing and blade

clamp and do not reach underneath work while blade

is cutting.

WARNING

To avoid serious personal injury, do not use saw without

safety guard properly in place.

VARIABLE SPEED

See Figure 9.

Your saw has a variable speed control selector designed

to allow operator control and adjustment of speed and

power limits. The speed and power of your saw can be

increased or decreased by rotating the variable speed

control selector in the direction of the arrows.

NOTE: Hold your saw in normal operating position and

turn the variable speed control selector counterclockwise

to increase speed and power. Turn clockwise to decrease

speed and power.

If you wish to lock the switch on at a given speed, depress

the switch trigger, push in and hold the lock-on button, and

release the switch trigger. Next, adjust the variable speed

control selector until the desired speed is reached.

Avoid running your saw at low speeds for extended

periods of time. Running at low speeds under constant

usage may cause your saw to become overheated.

If this occurs, cool your saw by running it without a load

and at full speed.

The following guidelines may be used in determining

correct speed for various applications:

 LOW speed is ideal when minimum speed and power

is required, for example starting cuts.

 MEDIUM speed is suitable for cutting hard metals,

plastics and laminates.

 HIGH speed produces best results when maximum

power is required, for example cutting wood.

Soft metals such as aluminum, brass and copper also

require high speeds.

BLADE STORAGE

See Figure 2.

A convenient feature of your saw is the blade storage. The

blade storage area is located on the back of dust port. It is

convenient for storing extra blades when not in use.

 To open: Pull the door down with your thumb or finger.

 Place blades in blade storage area.

 To close: Push the door up with your thumb or finger.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Ryobi EJ700L Kuviosaha. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Ryobi. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Ryobi EJ700L Kuviosaha käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Ryobi Kuviosahat
Lisää Kuviosahat käsikirjoja

Usein kysytyt kysymykset kohteesta Ryobi EJ700L Kuviosaha

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Ryobi RJS18X-0 Kuviosaha

Käyttöohje

Ryobi RJS18-0 Kuviosaha

Käyttöohje

Ryobi EJS-600QEO Kuviosaha

Käyttöohje

Ryobi R18JS-0 Kuviosaha

Käyttöohje

Ryobi CJS-180L Kuviosaha

Käyttöohje

Ryobi EJ600 Kuviosaha

Käyttöohje

Ryobi EJ500 Kuviosaha

Käyttöohje

Ryobi EJS-500QEO Kuviosaha

Aiheeseen liittyvät luokat