Käyttöohje Ryobi EJ700L Kuviosaha

Käyttöohje

1

English

GB

FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR

SPECIAL SAFETY RULES

 If operation is dusty, also wear a dust mask.

 Wait for the cutter to stop before setting the tool

down. An exposed cutter may engage the surface

leading to possible loss of control and serious injury.

 Hold power tool by insulated gripping surfaces

only, when performing an operation where the

cutting accessory may contact hidden wiring or its

own cord. Cutting accessory contacting a “live” wire

may make exposed metal parts of the power tool “live”

and shock the operator.

 If the replacement of the supply cord is necessary,

this has to be done by the manufacturer or his

agent in order to avoid a safety hazard.

LASER GUIDE

The laser guide radiation used in saw is Class 2M with

maximum <5mW and 650nm wavelengths. These lasers

do not normally present an optical hazard, although

staring at the beam may cause  ash blindness.

WARNING

DO NOT stare directly at the laser beam. A hazard may

exist if you deliberately stare into the beam, please

observe all safety rules as follows:

 The laser shall be used and maintained in accordance

with the manufacturer’s instructions.

 Never aim the beam at any person or an object other

than the work piece.

 The laser beam shall not be deliberately aimed at

personnel and shall be prevented from being directed

towards the eye of a person for longer than 0.25s.

 Always ensure the laser beam is aimed at a sturdy

work piece without reflective surfaces such as wood

or rough coated surfaces are acceptable. Bright shiny

reflective sheet steel or the like is not suitable for laser

use as the reflective surface could direct the beam

back at the operator.

 Do not change the laser guide assembly with a

different type. Repair must only be carried out by the

laser manufacturer or an authorised agent.

 Save these instructions. Refer to them frequently and

use to instruct other users. If you loan someone this

tool, loan them these instructions too.

SPECIFICATIONS

Voltage 230 V 50 Hz

Input power 680 W

Stroke per minute 800 - 3000 min

-1

Stroke length 21 mm

Max cutting capacity

Wood 85 mm

Steel 8 mm

FEATURES

KNOW YOUR SAW

Before attempting to use your saw, familiarize yourself

with all operating features and safety requirements.

ELECTRICAL CONNECTION

Your saw has a precision built electric motor. It should be

connected only to a power supply of the type speci ed by

its rating plate. Do not operate this tool on direct current

(DC). A substantial voltage drop will cause a loss of power

and overheating. If your tool does not operate when

plugged into an outlet, double-check the power supply.

WARNING

Do not allow familiarity with tools to make you careless.

Remember that a careless fraction of a second is

suf cient to in ict serious injury.

OPERATION

SWITCH

See Figure 1.

 To turn your saw on, depress the switch.

 Release switch trigger to turn your saw OFF.

LOCK-ON BUTTON

See Figure 1.

Your saw is equipped with a lock-on feature, which is

convenient when continuous cutting for extended periods

of time is required. To lock-on, depress the switch trigger,

push in and hold the lock-on button located on the side of

the handle, then release switch trigger. Release lock-on

button and your saw will continue running.

To release the lock, depress the switch trigger and

release.

If you have the lock-on feature engaged during use and

your saw becomes disconnected from power supply,

disengage the lock-on feature immediately.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Ryobi EJ700L Kuviosaha. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Ryobi. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Ryobi EJ700L Kuviosaha käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Ryobi Kuviosahat
Lisää Kuviosahat käsikirjoja

Usein kysytyt kysymykset kohteesta Ryobi EJ700L Kuviosaha

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Ryobi CJS-180L Kuviosaha

Käyttöohje

Ryobi EJS-600QEO Kuviosaha

Käyttöohje

Ryobi EJ600 Kuviosaha

Käyttöohje

Ryobi RJS18X-0 Kuviosaha

Käyttöohje

Ryobi RJS18-0 Kuviosaha

Käyttöohje

Ryobi EJ500 Kuviosaha

Käyttöohje

Ryobi EJS-500QEO Kuviosaha

Käyttöohje

Ryobi R18JS-0 Kuviosaha

Aiheeseen liittyvät luokat