Käyttöohje Clas Ohlson 98202 Ovikello

Käyttöohje

English

GREAT BRITAIN • customer service

tel: 020 8247 9300 e-mail [email protected] internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

1

2

3

4

5

Ver. 20180517

Wireless Doorbell

Art.no 18-5086 Model 98202 GB BS

36-7286 98202 EU

Please read theentire instruction manual before use and then save it for future

reference. Wereserve theright for any errors in text or images and any necessary

changes made to technicaldata. Intheevent of technical problems or other

queries, please contact our Customer Services.

Safety

• Never subject theproduct to high temperatures, damp or dusty environments,

heavy vibrations or impacts.

• Theindoor unit must not be exposed to rain or moisture.

• Never try to repair theproduct, dismantle or modify it in anyway.

Buttons and functions

Remove thepaired transmitter

Information

If you follow thefollowing steps, it will remove all thepaired transmitters from

thedoorbell’s memory.

1. Dismantle one of thetransmitters.

2. Remove thepower supply to thedoorbell by disconnecting it from thewall

socket. Waitafew seconds and then plug it in again so that thedoorbell is in

pairingmode. Thedoorbell will soundtwice.

3. While thedoorbell is in pairing mode, press thebutton inside thetransmitter.

Thedoorbell will sound to confirm that all thetransmitters have been removed

from thedoorbell’s memory.

Care and maintenance

Clean theproduct using adampcloth. Useonly mild cleaning agents, never

solvents or corrosive chemicals.

Troubleshooting

No sound when

thepush button

is pressed.

• Check that thebatteries are inserted correctly and that

they are notflat.

• Excessive distance between thetransmitter and

thedoorbell.

Responsible disposal

1. Doorbell/receiver

2. Button to select

thevolume

3. LED indicator

4. Transmitter

5. Push Button Ring

Signal

Installation

Handytip:

• 1 transmitter is included but you may connect anadditional 7 transmitters

(sold separately).

• If you are connecting several transmitters to thedoorbell, set different signals

for each transmitter so you know at which door thesignal is comingfrom.

Battery/pairing theunits

1. Open thetransmitter carefully

by pressing thelatch with

ascrewdriver.

2. Remove theplastic tab from

thebattery holder to activate

thebattery in theremote control.

3. Plug thedoorbell into a230 V wall

socket. Thedoorbell will sound

twice and theLED indicator (3)

starts to flash which indicates that

thedoorbell is ready to be paired

with thetransmitter.

4. Within 30 seconds, press

thetransmitter that you want to

connect thedoorbellto. Thedoorbell

will sound when thepairing has

been successful. If you wish to

pair additional transmitters: Cutoff

thepower supply to thedoorbell,

then repeat steps 3–4.

Choosing thering signal

Once thepairing has been successful, choose thering

signal by pressing repeatedly on thebutton inside

thetransmitter. Youcan choose between atotal of

16different melodies and sounds:

1. Dingdong

2. Für Elise

3. Westminster Chimes

4. TheButterfly Lovers

5. Swan Lake

6. Red River Valley

7. My heart will goon

8. Turkish March

9. Menuet

10. Congratulations

11. William Tell Overture

12. Romance oflove

13. Memory

14. TheLittle Mermaid

15. Greensleeves

16. Romeo & Juliet

Selecting thevolume

Press thebutton to select thevolume. Youcan choose

between high and low volume.

Assembly

Information

• Avoid placing theunits next to metal objects such as metal window frames as

this may cause interference with reception.

• Test thedoorbell’s functionality/location before final mounting.

1. Screw on

or glue (with

double-sided

adhesive

tape) the

backplate

of the

transmitter to

thewall.

2. Fit the

transmitter

onto the

backplate,

making

sure that

thegasket

is inplace.

Pressthe

latch on the

transmitter

until it clicks

intoplace.

This symbol indicates that this product should not be

disposed of with general householdwaste. Thisapplies

throughout theentire EU. Inorder to prevent any harm to

theenvironment or health hazards caused by incorrect waste

disposal, theproduct must be handed in for recycling so that

thematerial can be disposed of in aresponsible manner.

Whenrecycling theproduct, take it to your local collection

facility or contact theplace of purchase. Theywill ensure

that theproduct is disposed of in anenvironmentally sound

manner.

Specifications

Doorbell (receiver)

Rated voltage 230 V AC

Power consumption ≤ 0.5 W

Range Up to 100 m (clear line of sight)

Noise level 78 dB (at adistance of 1 m)

Signals 16 different melodies and sounds

Size 70×70×64mm

Push button (transmitter)

Transmission frequency 433.92 MHz

Battery CR2032 lithium (3 V)

Size 35×17×85 mm

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Clas Ohlson 98202 Ovikello. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Clas Ohlson. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Clas Ohlson 98202 Ovikello käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Clas Ohlson Ovikellot
Lisää Ovikellot käsikirjoja

Liittyvät tuotteet

Käyttöohje

Clas Ohlson 98203 Ovikello

Käyttöohje

Clas Ohlson 98233EU Ovikello

Käyttöohje

Clas Ohlson 98232 Ovikello

Käyttöohje

SilverCrest IAN 298815 Ovikello

Käyttöohje

Opal WA-628S-W Ovikello

Käyttöohje

Elro DB101 Ovikello

Käyttöohje

Elro DB260 Ovikello

Käyttöohje

SilverCrest IAN 113326 Ovikello

Aiheeseen liittyvät luokat