Käyttöohje Champion CHSJ310 Silitysrauta

Tarvitsetko käyttöoppaan Champion CHSJ310 Silitysrauta? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 4 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

EN
Selecting Shot-steam and steam when ironing vertically.
1. Press the shot-steam button (6) to generate a powerful burst of steam that can penetrate the fabrics and smooth the
most dicult and tough creases. Wait for a few seconds before pressing again [Fig. 4].
2. By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung garments, etc.) [Fig. 5].
Warning: The shot-steam function can only be used at high temperatures. Stop the emission when the plate temperature pilot
light (12) comes on, then start ironing again only after the light has gone o.
DRY IRONING
To iron without steam, follow the instructions in section “steam ironing”, leaving the steam selector (3) on position “0”.
Spray Function
Make sure that there is water in the reservoir. Press the spray button (5) slowly (for a dense spray) or quickly (for a vaporized spray)
[Fig. 6].
Warning: for delicate fabrics, we recommend moistening the fabric beforehand using the spray function (5), or putting a damp
cloth between the iron and the fabric. To avoid staining, do not use the spray on silk or synthetic fabrics.
CLEANING
Please note: before cleaning the iron in any way, make sure that the appliance plug is not connected to the socket.
Any deposits, starch residue or size left on the plate can be removed using a damp cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
SELF-CLEANING
The self-cleaning feature cleans inside the plate, removing impurities. We recommend using it every 10-15days. Directions:
1. Fill the reservoir up to the maximum level indicated and set the steam selector (3) to “0”
2. Set the thermostat knob (14) to the maximum temperature and wait for the pilot light (12) to turn o.
3. Pull the plug out of the socket and hold the iron horizontally over the sink.
4. Hold the cleanout button (15) setting until all the boiling water, steam, impurities come out [Fig. 7].
5. When the soleplate has cooled down, you can clean it with a damp cloth.
HOW TO PUT IT AWAY
1. Disconnect the plug of the iron from the socket.
2. Empty the reservoir by turning the iron upside down and gently shaking it.
3. Leave the iron to cool down completely.
4. Roll up the power cord with the rewinder [Fig. 8].
5. Always put the iron away in a vertical position.
ADVICE FOR GOOD IRONING
We recommend using the lowest temperatures with fabrics that have unusual nishes (sequins, embroidery, ush, etc.).
If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the thermostat to the temperature of the ber requiring the
lower temperature.
If you don’t know the composition of the fabric, determine the suitable temperature by testing on a hidden corner of the
garment. Start with a low temperature and increase it gradually until it reaches the ideal temperature.
Never iron areas with traces of perspiration or other marks: the heat of the plate xes the stains on the fabric, making them
irremovable.
To avoid marking silk, woolen or synthetic garments shiny, iron them inside out.
To avoid marking velvet garments shiny, iron in one direction (following the ber) and do not press down on the iron.
The heavier the washing machine is loaded, the more garments come out creased. This also happens when the spin drying
revolutions are very high.
Many fabrics are easier to iron if they are not completely dry.
Lataa käyttöohje suomalainen (PDF, 0.83 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Champion CHSJ310 Silitysrauta arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Champion CHSJ310 Silitysrauta?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Champion CHSJ310 Silitysrauta:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Champion CHSJ310 Silitysrauta. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Champion. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Champion CHSJ310 Silitysrauta käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Champion
Malli CHSJ310
Kategoria Silitysraudat
Tiedostotyyppi PDF
Tiedoston koko 0.83 MB

Kaikki käsikirjat kohteelle Champion Silitysraudat
Lisää Silitysraudat käsikirjoja

Usein kysytyt kysymykset kohteesta Champion CHSJ310 Silitysrauta

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Voinko puhdistaa silitysraudani pohjan hankauslaitteella? Todennettu

Ei, tämä voi vahingoittaa pohjaa. Puhdista se kostealla liinalla tai pehmeällä sienellä.

Tästä oli apual (365) Lue lisää

Mitä eroja on höyrysilitysraudalla ja tavallisella silitysraudalla? Todennettu

Höyrysilitysraudan suurin etu on, että se poistaa ryppyjä helpommin höyryn käytön ansiosta. Tavallinen silitysrauta on päinvastoin paljon kevyempi ja usein halvempi.

Tästä oli apual (298) Lue lisää

Silitysraudani pohja on värjäytynyt, voinko silittää silti sen kanssa? Todennettu

Se on mahdollista, mutta on mahdollista, että se hankaa vaaleat vaatteet.

Tästä oli apual (247) Lue lisää

Voinko silittää nappeja? Todennettu

Ei, se vahingoittaa silitysraudan pohjaa ja estää rautaa toimimasta oikein. Älä koskaan silitä nappeja, vetoketjuja tai muita kovia esineitä.

Tästä oli apual (171) Lue lisää
Käyttöohje Champion CHSJ310 Silitysrauta

Liittyvät tuotteet

Aiheeseen liittyvät luokat