Käyttöohje Black and Decker KA274EK(L) Tasohiomakone

Käyttöohje

6

ENGLISH

5. Paper clamp lever

6. Variable speed control knob

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingsandingsheets(g.A)

Warning! Never use the tool without a sanding sheet or

accessory in place.

u Soften the sanding sheet by rubbing its non-abrasive side

over the edge of a worktop.

u Release the sanding sheet clamp levers (5).

u Place the sheet onto the sanding base (4), making sure that

the holes in the sheet line up with the holes in the base.

u Insert the edge of the sanding sheet into the front paper

clamp as shown.

u Press the front paper clamp lever (5) downwards.

u While keeping a slight tension on the sheet, insert the rear

edge of the sheet into the rear paper clamp.

u Press the rear paper clamp lever (5) downwards.

Fittingandremovingthedustbag(g.B)

u Fit the dustbag (7) over the dust extraction outlet (3).

u Rotate the dustbag to lock it into position.

u To remove the dustbag, proceed in reverse order.

Connectingavacuumcleaner(g.C)

u Insert the adaptor (8) into the dust extraction outlet (3).

u Connect the hose (9) of the vacuum cleaner to the adaptor.

Residual risks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving

parts.

u Injuries caused when changing any parts, blades or

accessories.

u Injuries caused by prolonged use of a tool. When

using any tool for prolonged periods ensure you take

regular breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF.)

Use

Warning! Let the tool work at its own pace. Do not overload.

Variable speed control

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

u Set the control knob (6) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and for

removing paints.

Switching on and off

u To switch the tool on, press the on/off switch (1).

u For continuous operation, press the lock-on button (2) and

release the on/off switch.

u To switch the tool off, release the on/off switch. To switch

the tool off when in continuous operation, press the on/off

switch once more and release it.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

u Shake the dustbag to empty the contents.

Hintsforoptimumuse(g.D)

u Always hold the tool with both hands.

u Do not exert too much pressure on the tool.

u Regularly check the condition of the sanding sheet.

Replace when necessary.

u Always sand with the grain of the wood.

u When sanding new layers of paint before applying another

layer, use extra ne grit.

u On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start with

a medium grit. In both cases, gradually change to a ne

grit for a smooth nish.

u Consult your retailer for more information on available

accessories.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

u Regularly clean the ventilation slots in your tool using a soft

brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker KA274EK(L) Tasohiomakone. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker KA274EK(L) Tasohiomakone käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Tasohiomakoneet
Lisää Tasohiomakoneet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker KA274EK(L) Tasohiomakone

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker KA196 Tasohiomakone

Käyttöohje

Black and Decker AST4XC Tasohiomakone

Käyttöohje

Black and Decker XTA71 Tasohiomakone

Käyttöohje

Black and Decker KA310 Tasohiomakone

Käyttöohje

Black and Decker KA400 Tasohiomakone

Käyttöohje

Black and Decker KA170GT Tasohiomakone

Käyttöohje

Black and Decker KA295 Tasohiomakone

Käyttöohje

Black and Decker KA171L Tasohiomakone

Aiheeseen liittyvät luokat