Käyttöohje Asaklitt CL22139 Ilmapatja

Tarvitsetko käyttöoppaan Asaklitt CL22139 Ilmapatja? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 5 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

GREAT BRITAIN • CUSTOMER SERVICE
tel: 020 8247 9300 e-mail: [email protected].uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
ENGLISH
Ver. 20170104
Airbed
Art.no 18-3618-1 Model CL22139V01
18-3618-2 CL22140V01
31-3215 CL22139
31-3215-1 CL22140
Please read theentire instruction manual before using theproduct
and then save it for future reference. We reserve theright for any
errors in text or images and any necessary changes made to
technical data. In theevent of technical problems or other queries,
please contact our Customer Services.
Safety
For indoor use only.
Do not expose theelectric pump to moisture.
Inspect themains lead regularly. Do not use theairbed if
thepower lead or plug is damaged.
Never run thepump for longer than 15 minutes at atime.
Let themotor cool down for 20 minutes before using it again.
Unplug thepump when it is not in use.
Do not let children use theelectric pump without supervision.
Do not use hot air to fill theairbed, as theairbed might melt.
Do not overfill theairbed. Adequate inflation is when thebed is
fully expanded and firm.
Theairbed is not abuoyancy aid. Do not use it on thewater.
Theairbed is not alifebuoy or life-saving device.
Keep theairbed away from fire, otherwise it could melt.
Theairbed is not atoy. Do not stand or jump on it.
Always have theflocked surface facing upright.
Never hold theair inlet/outlet next to your eyes or hair when
thepump is running.
Theairbed may be used by persons with reduced physical,
sensory or mental capability, lack of experience or knowledge
which could jeopardise their safety, provided they have been
given proper supervision or instruction regarding thesafe use of
theproduct and understand any hazards involved.
Never let children play with theairbed.
Product description
Airbed with built-in electric pump for speedy inflation and deflation.
Highly comfortable bed with flocked top. Phthalate-free.
Inflating the airbed
1. Open thecable storage compartment to access themains lead.
2. Plug themains lead into awall socket.
Care and maintenance
Note: If theairbed is used permanently with some kind of mattress
topper, it should be aired regularly. Otherwise moisture can develop
between theairbed and themattress topper, which in time can lead
to mould.
If theairbed is dirty, clean it using adamp cloth. Do not use
strong detergents.
Make sure that theairbed is dry before folding it up for storage.
Empty theairbed of all air before storage. Store theairbed in
acool, dry place.
Keep sharp objects away from theairbed.
Responsible disposal
3. Turn thecontrol knob
to [ INFLATE ].
2. Turn thecontrol knob
to [ DEFLATE ].
4. When theairbed is firm but not
hard, stop thepump by turning
thecontrol knob to [ OFF ].
3. When theairbed has deflated,
stop thepump by turning
thecontrol knob to [ OFF ].
5. Unplug thepump and return thelead to it storage compartment.
Note: Theairbed might lose some of its firmness after it has been
inflated because theair being pumped in becomes warm as it is
pumped. Once theair has cooled down it loses some of its volume.
ThePVC can also stretch alittle as theairbed is inflated, which can
also contribute to theairbed losing some of its firmness awhile
after inflation.
Deflating the airbed
1. Plug themains lead into awall socket.
4. Unplug thepump and return thelead to it storage compartment.
Manual bed inflation
It is possible to inflate theairbed manually if there is no wall
socket available.
1. Remove thecap from theair valve.
2. Connect ahand pump to theair valve. Don’t use acompressor
or other mechanical pump.
3. Inflate thebed manually.
4. When theairbed is fully inflated, disconnect thehand pump and
put thecap back on theair valve.
This symbol indicates that this product should not
be disposed of with general household waste. This
applies throughout theentire EU. In order to prevent
any harm to theenvironment or health hazards
caused by incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial can be
disposed of in aresponsible manner. When recycling
your product, take it to your local collection facility
or contact theplace of purchase. They will ensure
that theproduct is disposed of in anenvironmentally
sound manner.
Specifications
Power supply 220–240V, 50Hz
Power 130 W
Size
18-3618-1 203×157×40cm
18-3618-2 203×97×40cm
31-3215 203×97×40cm
31-3215-1 203×157×40cm
Lataa käyttöohje suomalainen (PDF, 1.4 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Asaklitt CL22139 Ilmapatja arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Asaklitt CL22139 Ilmapatja?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Asaklitt CL22139 Ilmapatja:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Asaklitt CL22139 Ilmapatja. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Asaklitt. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Asaklitt CL22139 Ilmapatja käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Asaklitt
Malli CL22139
Kategoria Ilmapatjat
Tiedostotyyppi PDF
Tiedoston koko 1.4 MB

Kaikki käsikirjat kohteelle Asaklitt Ilmapatjat
Lisää Ilmapatjat käsikirjoja

Usein kysytyt kysymykset kohteesta Asaklitt CL22139 Ilmapatja

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Ilmapatjani tyhjentyy hitaasti ajan myötä, mutta ei näytä vuotavan. Miksi niin? Todennettu

Lämpötilaerot ovat yleinen syy ilmapedin pehmenemiseen. Kuuma ilma laajenee ja vanhat lentosopimukset. Kun ilmapatja täytetään lämpimällä ilmalla päivällä ja se jäähtyy yöllä, ilmapeti tuntuu pehmeämmältä. Muita syitä ovat viallinen venttiili tai vanha materiaali, josta on tullut huokoinen. Jälkimmäisessä tapauksessa ilmapatja on vaihdettava. Ota yhteys valmistajaan, jos venttiili on viallinen.

Tästä oli apual (151) Lue lisää

Voinko korjata ilmavuoteen vuotamisen polkupyörän renkaiden korjaussarjalla? Todennettu

Ilmavuodon vuoto on mahdollista korjata polkupyörän renkaiden korjaussarjalla. Ilmapehmusteissa käytetty PVC voi kuitenkin olla erilainen kuin polkupyörän renkaissa, jolloin on mahdollista, että liima ei tartu hyvin ilmapenkkiin. Pitkäaikaiseen korjaukseen on parasta hankkia erityisesti ilmapatjaan tehty korjaussarja.

Tästä oli apual (45) Lue lisää

Voinko ilmatilan täyttää suullani? Todennettu

Ilmasängyn täyttämistä suulla ei ole suositeltavaa. Sen lisäksi, että se vie kauan ja tekee siitä tekevälle henkilölle huimauksen, suuri haitta ilmapeden täyttämisellä suulla on se, että ilman viereen sylki puhalletaan ilmapetiin. Tämä voi vaikuttaa ilmapatjaan ajan myötä.

Tästä oli apual (29) Lue lisää

Ilmasängyn muotoiset sisennykset tuntevat olonsa epämukavaksi nukkumisen aikana, mitä voin tehdä asialle? Todennettu

Näitä ilmapohjan muotoisia sisennyksiä tarvitaan estämään sen pullistumista täytettäessä. Jos nämä tuntuu liian tukevilta, ilmapatja on liian täynnä. Anna ilmaa tehdä siitä pehmeämpi.

Tästä oli apual (27) Lue lisää

Ilmapatja tuntuu kylmältä, mitä voin tehdä? Todennettu

Ilmapatja ei eristä hyvin, koska se on täynnä ilmaa. Lattian kylmä menee ilmapedin ilmaan, jolloin se tuntuu kylmältä. Tämän estämiseksi voit käyttää eristettyä mattoa ilmapedin alla tai eristettyä peitekerrosta ilmapedin päällä.

Tästä oli apual (22) Lue lisää
Käyttöohje Asaklitt CL22139 Ilmapatja

Liittyvät tuotteet

Aiheeseen liittyvät luokat