Käyttöohje Tefal FV6050Z0 Minute Silitysrauta

Käyttöohje

6

PROBLEM POSSIBLE CAUSES SOLUTIONS

Water is running out of

the steam holes in

the soleplate.

The selected temperature is too low for

steam.

You are using steam when the iron is not

hot enough.

You have stored your iron flat, without

setting the control to dry.

Set the thermostat in the coloured area (from ••• to MAX).

Wait for the indicator lamp to go out.

See the chapter "Storing your iron".

Brown deposits are

coming out of the

soleplate and staining

the ironing.

You are using chemical de-scalers.

You are using unsuitable water.

Textile fibres have accumulated in the

steam holes and are burning.

Your linen has not been rinsed suffi-

ciently or you have ironed a new gar-

ment before washing it.

Do not add any de-scaling product to the water in the tank.

See the chapter "What water should be avoided"

Carry out the self-cleaning procedure. Clean the soleplate

with a non-metallic sponge. From time to time, vacuum the

steam holes.

Ensure linen is rinsed thoroughly to remove any soap depo-

sits or chemicals on new garments which may be sucked up

by the iron.

The soleplate is brown or

dirty and can stain

the ironing.

You are using too high a temperature.

Your ironing was not properly rinsed or

you are using starch.

Clean the soleplate, as indicated above. See the chapter on

temperatures for the thermostat setting.

Clean the soleplate, as indicated above. Always spray starch

onto reverse side of the fabric to be ironed.

Your iron produces little

or no steam.

The iron is set to DRY.

The tank is empty.

The anti-scale valve is dirty.

Your iron is scaled up.

Your iron has been used too long on the

dry setting.

Press the Dry / Steam control to activate the steam.

Fill it.

Clean the anti-scale valve .

Clean the anti-scale valve and carry out the self-cleaning

procedure.

Carry out the self-cleaning procedure.

The soleplate is scratched

or worn.

You have put your iron down on a metal

stand.

Always put your iron down on its stand.

Water flows out of the

tank hatch.

You have not closed the tank stopper pro-

perly.

You have over-filled the tank.

Check that the tank hatch is properly closed and press it

home beyond the point of resistance.

Do not exceed the maximum level indicated on the tank.

The iron steams at the

end of tank filling.

The steam control button is not set to

DRY .

Put the steam control on the DRY position.

At the end of ironing,

there is an accumulation

of water in the bottom

of the iron stand.

You have been ironing for a long time or

theambient temperature is low.

After the iron has cooled on its stand, wipe up the surplus

water in the iron stand before putting the system away.

If there is problem

Self-cleaning procedure

• Leave the iron with the water, tank full, on its stand (thermostat set at

maximum). When the indicator light goes out, unplug the iron and hold it

over a sink.

• Remove the anti-scale valve.

• Shake the iron gently, holding it horizontally, over the sink, until most of

the water, (with the impurities) has run out through the soleplate.

• Re-insert the anti-scale insert.

• Place the iron on its stand and plug in for 2 minutes to dry the soleplate.

• Unplug the iron and, when the soleplate has cooled, wipe it with a soft

cloth.

To extend the working life of

your iron, carry out the self-

cleaning procedure once a

month.

Helpline

If you have any problems or queries, please call our Customer Relations Team first for expert help

and advice :

0845 602 1454 - UK / (01) 4751947 - IRELAND

or consult our web site : www.tefal.co.uk

Notice FTB 047257 14/12/05 15:49 Page 6

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Tefal FV6050Z0 Minute Silitysrauta. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Tefal. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Tefal FV6050Z0 Minute Silitysrauta käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Tefal Silitysraudat
Lisää Silitysraudat käsikirjoja

Usein kysytyt kysymykset kohteesta Tefal FV6050Z0 Minute Silitysrauta

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Tefal FV6833E0 Silitysrauta

Käyttöohje

Tefal FV6841X0 Silitysrauta

Käyttöohje

Tefal FV5844Z0 Silitysrauta

Käyttöohje

Tefal FV8064E0 Puregliss Silitysrauta

Käyttöohje

Tefal FV2866E0 Silitysrauta

Käyttöohje

Tefal SV8151E0 Silitysrauta

Käyttöohje

Tefal FV8062E0 Silitysrauta

Käyttöohje

Tefal FV6840M0 Silitysrauta

Aiheeseen liittyvät luokat