Käyttöohje Skil 3018 AA Porakone-ruuvinväännin

Käyttöohje

10

• Battery protection

The tool is suddenly being switched o or prevented from

being switched on, when

- the load is too high --> remove load and restart

- the battery temperature is not within the allowable

operating temperature range of -20 to +50°C --> 2

levels of the battery level indicator start ashing when

pressing button N

8

c; wait until battery has returned

within the allowable operating temperature range

- the battery is nearly empty (to protect against

deep discharge) --> a low battery level or ashing low

battery level

8

b is shown by the battery level indicator

when pressing button N; charge battery

! 



damaged

• Changing direction of rotation

9

- when not properly set in left/right position, switch A

2

cannot be activated

! change direction of rotation only when tool is at a

complete standstill

• Changing bits

q

! do not use bits with a damaged shank

• Torque control (VariTorque)

w

- output torque will increase as clutch ring B is rotated

from 1 to 17

- when turning in a screw, rst try VariTorque position 1

and increase until the desired depth has been reached

- position F will lock up the clutch to permit (non-impact)

drilling or driving heavy-duty work

- position D will lock up the clutch to permit impact

drilling only

! ensure that gear selector B is in position 2 when

function selector C is in impact drilling position

! do not use impact drilling position D for drilling in

wood, metal, ceramic and plastic to prevent the

drill/screw bit from being damaged

• Mechanical gear selection

e

- set selector G to desired speed

! actuate the gear selector while tool is running

slowly

1

- low speed

- high torque

- for screwdriving and drilling large diameters

- for tapping thread

2

- high speed

- lower torque

- for impact drilling

- for drilling small diameters

• Holding and guiding the tool

t

! while working, always hold the tool at the grey-

coloured grip area(s)

- keep ventilation slots J

2

uncovered

- do not apply too much pressure on the tool; let the tool

do the work for you

MAINTENANCE / SERVICE

• This tool is not intended for professional use

• Always keep tool clean (especially ventilation slots H

2

)

! remove battery from tool before cleaning

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

• 

or call the local utility company for assistance

(contact with electric lines can lead to re or electrical

shock; damaging a gas line can result in an explosion;

penetrating a water pipe will cause property damage or

an electrical shock)

DURING USE

• In case of electrical or mechanical malfunction,

immediately switch o the tool or unplug charger from

power source

BATTERIES

• The battery supplied is partially charged (to ensure

full capacity of the battery, completely charge the battery

in the battery charger before using your power tool for the

rst time)

• Only use the following batteries and chargers with

this tool

- SKIL battery: BR1*31****

- SKIL charger: CR1*31****

• Do not use the battery when damaged; it should be

replaced

• Do not disassemble the battery

• Do not expose tool/battery to rain

• Permitted ambient temperature (tool/charger/battery):

- when charging 4...40°C

- during operation –20...+50°C

- during storage –20...+50°C

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

3

Read the instruction manual before use

4

Batteries may explode when disposed of in re, so do not

burn battery for any reason

5

Store tool/charger/battery in locations where temperature

will not exceed 50°C

6

Do not dispose of electric tools and batteries together

with household waste material

USE

• Combined switch for on/o and speed control A

2

- control the speed steplessly from zero to maximum by

putting less or more pressure on the trigger

• Charging battery

! read the safety warnings and instructions

provided with the charger

• Removing/installing the battery

2

• Attaching belt clip

7

- attach the belt clip L to the drill with the supplied screw.

• Battery level indicator

8

- press the battery level indicator button N to show the

current battery level

8

a

! when the lowest level of the battery indicator



8

b, the

battery is empty

! 

after pressing button N

8

c, the battery is not

within the allowable operating temperature range

• LED-light M

r

LED-light M automatically lights on when activating

switch A

! 

protection is activated (see below)

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Skil 3018 AA Porakone-ruuvinväännin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Skil. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Skil 3018 AA Porakone-ruuvinväännin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Skil Porakone-ruuvinvääntimet
Lisää Porakone-ruuvinvääntimet käsikirjoja

Usein kysytyt kysymykset kohteesta Skil 3018 AA Porakone-ruuvinväännin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Skil 2844 AC Porakone-ruuvinväännin

Käyttöohje

Skil 3070 HC Porakone-ruuvinväännin

Käyttöohje

Skil 3020 EA Porakone-ruuvinväännin

Käyttöohje

Skil 2060 CA Porakone-ruuvinväännin

Käyttöohje

Skil 3018 HD Porakone-ruuvinväännin

Käyttöohje

Skil 3085 CA Porakone-ruuvinväännin

Käyttöohje

Skil 3070 DA Porakone-ruuvinväännin

Käyttöohje

Skil 0931 AA Porakone-ruuvinväännin

Aiheeseen liittyvät luokat