Käyttöohje Skil 1630 MA Betonimylly

Käyttöohje

9

b) Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or

remove the battery pack, if detachable, from the

power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR MIXERS

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Never use the tool in or near an explosive atmosphere

• Never mix combustible substances

• Never reach with your hand or any other object into the

mixing container during mixing

• Wear protective gloves, a dust mask, close-fitting

clothes and sturdy shoes

• The noise level when working can exceed 85 dB(A);

wear ear protection

• SKIL can assure awless functioning of the tool only

when the correct accessories are used which can be

obtained from your SKIL dealer

• Always disconnect plug from power source before

making any adjustment or changing any accessory

EXPLANATION OF SYMBOLS ON TOOL

3 Read the instruction manual before use

4 Double insulation (no earth wire required)

5 Do not dispose of the tool together with household waste

material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o 6

• Switch locking for continuous use 7

! be aware of the forces that occur as a result of

jamming; hold the tool firmly with both hands and

take a secure stance

• Maximum speed control 8

With wheel C the maximum speed can be adjusted from

low to high (1-8+MAX)

- switch on the tool

- lock the switch

- turn wheel C to select maximum speed

• Mechanical gear selection 9

- set selector D to desired speed

! actuate the gear selector only when tool is

switched off

1 = LOW SPEED

- high torque

- for mixing high-density substances

2 = HIGH SPEED

- lower torque

- for mixing liquid substances

• Protection frame 0 (1640)

- for protecting the tool

- for guiding the tool

- for putting aside the tool in a simple way

- mount protection frame E before using the tool for the

rst time

• Operating the tool

! ensure that the tool is switched off

- mount mixing paddle G onto spindle F as illustrated !

- connect plug to power source

- ensure the mixing container is securely positioned on

the oor

- dip the mixing paddle into the substance to be mixed

- set wheel C 2 in position “1”

- switch on the tool

- gradually increase the mixing speed by turning wheel

C 2 to the desired maximum speed (so that the

substance will not splash around)

! switch the tool off only when the mixing paddle is

in the mixing container

• Electronic soft-start

Ensures reaching the maximum speed smoothly without

a sudden impact when tool is switched on

• Electronic constant speed

Keeps the speed at a constant level as the load increases

• Electronic overload protection

- reduces the mixing speed automatically in case the

tool is overloaded for a longer period of time

- release switch A 2 briey for returning to normal

working speed

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Skil 1630 MA Betonimylly. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Skil. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Skil 1630 MA Betonimylly käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Skil Betonimyllyt
Lisää Betonimyllyt käsikirjoja

Usein kysytyt kysymykset kohteesta Skil 1630 MA Betonimylly

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Skil 1613 AA Betonimylly

Käyttöohje

Skil 1612 MA Betonimylly

Käyttöohje

Skil 1608 AA Betonimylly

Käyttöohje

Skil 1016 AA Betonimylly

Käyttöohje

Skil 1640 MA Betonimylly

Käyttöohje

Skil 1610 MA Betonimylly

Käyttöohje

Skil 1609 AA Betonimylly

Käyttöohje

Skil 1611 MA Betonimylly

Aiheeseen liittyvät luokat