Käyttöohje Siemens TS20XTRM Silitysrauta

Käyttöohje

13

1. Set the temperature selector (14) on “• • •”

2. Press the steam release button (15) on the bottom

of the handle two times shortly (double-click)

or (model dependent)

Shortly press the steam release button (16) on the

top of the handle.

Remark : It is possible to stop the shots of steam by

pressing the steam button shortly again.

“XTRM steam” function

(model dependent)

The “XTRM steam” function helps to make a faster

softening of very stubborn garments like Jeans or linen

tablecloth. When activating the “XTRM steam” button

(16) the steam generator produces an extra amount of

steam. The function should be used during intervals of a

few seconds, to be the most effective.

1. set the temperature selector (14) on “•••”

2. press the “XTRM steam” button (16).

Important:

• The steam hose may get hot if you are ironing for

long periods.

•

Note: Some water drops may appear when you use

the “Pulse steam” or the “XTRM steam” function for

the first time. The water drops will disappear after

you have used the function for some time.

Ironing without steam

1. Begin ironing but without pressing the steam release

button.

Vertical steam (C)

1. Set the temperature control to the “•••” or “max”

position.

2. You can steam iron curtains and hanging garments

(jackets, suits, coats...) by placing the iron in a

vertical position and pressing the steam release

button.

Never direct the steam jet at garments that are

being worn.

Never aim the steam at people or animals.

Energy saving “eco” button

(model dependent)

If the “Energy saving” button (8) is switched on, the

energy consumption of the appliance will be reduced,

by means of automatic reduction of electricity and

water consumption. A good ironing result can be

obtained for most of the garments.

Use the normal energy setting only for thick and highly

wrinkled fabrics.

Note: If you work with the “Energy saving”

function, the variable steam regulation and

temperature regulation can still be used as

recommended.

Cleaning & Maintenance

Always unplug the appliance from the mains

supply before carrying out any cleaning or

maintenance operation on it.

1. After ironing, pull out the plug and allow the

appliance to cool down before cleaning.

2. Wipe the housing, handle and iron body with a

damp cloth.

3. If the soleplate is soiled with dirt or scale, clean it

with a damp cloth.

4. Never use abrasive products or solvents.

Storing the appliance (D)

1. Always allow the appliance to cool down before

storing it.

2. Set the main power to the “0” position and

disconnect the mains cable.

3. Place the iron on the iron pad, standing on the

soleplate.

4. Store the mains cable in the storage compartment

(5) and the steam hose in the storage fixing (3). Do

not wrap the cords too tight.

5. Use the carrying handles (4) on the sides when

moving the appliance.

Fabric protection soleplate cover (E)

(model dependent)

The fabric-protection soleplate cover is used for steam-

ironing delicate garments at maximum temperature

without damaging them. Use of the soleplate cover

also does away with the need for a cloth to prevent

shine on dark materials.

It is advisable to first iron a small section on the inside

of the garment to see if it is suitable.

To attach the soleplate cover to the iron, place the tip

of the iron into the end of the soleplate cover and pull

the elastic strap over the lower rear of the iron until

it fits tightly. To release the soleplate cover, pull the

elastic strap and remove the iron.

The fabric-protection soleplate cover may be purchased

from the customer service or specialist shops:

Accessory code

(After-sales)

Name of accessory

(Specialist outlets)

571510 TZ20450

en

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Siemens TS20XTRM Silitysrauta. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Siemens. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Siemens TS20XTRM Silitysrauta käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Siemens Silitysraudat
Lisää Silitysraudat käsikirjoja

Usein kysytyt kysymykset kohteesta Siemens TS20XTRM Silitysrauta

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Siemens TS203100X Silitysrauta

Käyttöohje

Siemens TB21573 Silitysrauta

Käyttöohje

Siemens TS11XTRM24 Silitysrauta

Käyttöohje

Siemens TB24305 Silitysrauta

Käyttöohje

Siemens TS25320 Silitysrauta

Käyttöohje

Siemens TS11XTRM Silitysrauta

Käyttöohje

Siemens TB24420 Silitysrauta

Käyttöohje

Siemens TS22XTRM Silitysrauta

Aiheeseen liittyvät luokat