Käyttöohje Siemens TS20XTRM Silitysrauta

Käyttöohje

11

Thank you for buying the slider SL20 steam

station, the new steam-ironing system from

Siemens.

Carefully read through the operating instructions

for the appliance and safeguard them for future

reference.

Introduction

These instructions for use contain valuable information

about the unique features of this system and some

hints to make ironing easier for you.

We hope that you enjoy ironing with this steam

station.

Important

Open out the first page of the booklet, this will help you

to understand how the appliance works.

This appliance complies with international safety

standards.

This appliance has been designed exclusively for

domestic use and must not be used for industrial

purposes.

This appliance must only be used only for the purposes

for which it was designed, i.e. as an iron. Any other

use will be considered improper and consequently

dangerous. The manufacturer will not be held

responsible for any damage arising from misuse or

improper use.

General safety instructions

• This appliance is to be connected and used in

accordance with the information stated on its

characteristics plate.

• This appliance must be connected to an earthed

socket. If it is absolutely necessary to use an

extension cable, make sure that it is suitable for 16A

and has a socket with an earth connection.

• The iron should not be used if it has been dropped,

if there are visible signs of damage or if it is leaking

water. It must be checked by an authorized Technical

Service Centre before it can be used again.

• If the safety fuse fitted in the appliance blows, the

appliance will be rendered inoperative. To restore

normal operation the appliance will have to be taken

to an authorised Technical Service Centre.

• In order to avoid that, under unfavourable mains

conditions, phenomena like transient voltage

drops or lighting fluctuations can happen, it is

recommended that the iron is connected to a power

supply system with a maximum impedance of 0.27

 . If necessary, the user can ask the public power

supply company for the system impedance at the

interface point.

• This appliance is not intended to be used by persons

(including children) with reduced physical, sensory

or mental capacities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning the use of the appliance by

a person responsible for their safety.

• Children should be supervised to ensure that they

do not play with the appliance.

• Remove the plug from the socket before filling the

appliance with water or before pouring out the

remaining water after use.

• The appliance must never be placed directly under

the tap to fill the water tank.

• The appliance must be used and placed on a stable

surface.

• When placed on its stand, make sure that the

surface on which the stand is placed is stable.

• The iron must not be left unattended while it is

connected to the supply mains.

• Unplug the appliance from the mains supply after

each use, or if a fault is suspected.

• The electrical plug must not be removed from the

socket by pulling the cable.

• Never immerse the iron or steam tank in water or

any other fluid.

• Do not leave the appliance exposed to weather

conditions (rain, sun, frost, etc.).

• With the aim of avoiding dangerous situations, any

work or repair that the appliance may need, e.g.

replacing a faulty mains cable, must only be carried

out by qualified personnel from an Authorised

Technical Service Centre.

Important :

• This appliance reaches high temperatures and

produces steam during use, this could cause scalds

or burns in case of improper use.

• The steam hose, base station and in particular the

iron can get hot when used.

• Never aim the steam at people or animals.

• Do not allow the power cable to come into contact

with the soleplate when it is hot.

Description

1. Water tank

2 Removable iron pad

3 Steam hose storage fixing

4 Carrying handles

5 Mains cable storage compartment

6 Mains cable

7 Steam hose

8 “Energy Saving” button

*

9 “Steam ready” pilot light

10 Variable steam control

*

11 “Refill water tank” pilot light

12 Illuminated main power button (0/I)

13 Housing with internal steam generator

14 Temperature control knob

15 Steam release button

16 Steam release button “XTRM steam”

*

17 Iron pilot light

18 Soleplate

* Model dependent

en

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Siemens TS20XTRM Silitysrauta. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Siemens. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Siemens TS20XTRM Silitysrauta käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Siemens Silitysraudat
Lisää Silitysraudat käsikirjoja

Usein kysytyt kysymykset kohteesta Siemens TS20XTRM Silitysrauta

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Siemens TS203100X Silitysrauta

Käyttöohje

Siemens TB21573 Silitysrauta

Käyttöohje

Siemens TS11XTRM24 Silitysrauta

Käyttöohje

Siemens TB24305 Silitysrauta

Käyttöohje

Siemens TS25320 Silitysrauta

Käyttöohje

Siemens TS11XTRM Silitysrauta

Käyttöohje

Siemens TB24420 Silitysrauta

Käyttöohje

Siemens TS22XTRM Silitysrauta

Aiheeseen liittyvät luokat