Käyttöohje Sharp BK-CM03-EBL Sähköavusteinen polkupyörä

Tarvitsetko käyttöoppaan Sharp BK-CM03-EBL Sähköavusteinen polkupyörä? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 4 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

4
What's in the Box:
E-Bike Parts
1 × E-bike
Accessories Box
1 × Quick Start Guide (this document)
1 × Warranty guide
1 × Charger
2 × Pedal
2 × Battery keys
Accessories Box
(Refer to 1 on page 1)
Bike Parts
(Refer to 2 on page 1)
Bike Frame Number
The bike frame number can be found stamped on the tube, as shown in
the gure. It is the unique identier for your e-bike. When your bike is
stolen, it’s the serial number that gives you the biggest chance of getting it
back. It would be a good idea to write it somewhere or take a picture.
Assembling the E-bike
The bicycle comes assembled with turned handlebar. Turn the handlebar
referring to the dedicated paragraph. The pedals are to be assembled.
Refer to the dedicated paragraph. Remove the protections and position it
correctly to be able to use the bicycle. To remove and reposition it, refer to
the dedicated paragraph.
STEP 1: Install and adjust the handlebar
a. Turn the handlebars perpendicular to the bike, If necessary, you can
adjust the angle of the handlebars. Use a allen key to loosen screws and
adjust handlebar, after that retighten the screws.
b. Use a allen key to loosen the angle adjustment screw at the bottom of
the stem. Adjust the stem to a suitable angle and retighten the screw.
c. Adjust the position of the brake levers, display, ringbell to t your
requirements.
CAUTION: Be sure to carefully fasten all locks before riding the bicycle.
STEP 2: Install the pedals
Use the 15 mm wrench to mount the pedals, as shown in gure.
L R
NOTES:
Pedal thread must be lubricated before being assembled.
Check the end cap on both pedals to identify the left pedal and right pedal.
Please note that the right pedal will tighten clockwise, while the left pedal will
tighten anticlockwise. Make sure the torque is about 35 N·m.
STEP 3: Saddle height adjustment and tightening
Adjust the saddle
The correct adjustment of the saddle is important for the position of the
body while pedalling and allows you to obtain the best performance with
less stress on the joints.
Before use, ride the bicycle and adjust the height and angle of the saddle.
Height
The height of the saddle must be adjusted according to the length of the
legs. The height is correct if, while sitting, you reach the pedal placed in the
lowest position with the heel. The leg must be completely straight. Adjust
the height according to these indications.
Open the closing lever and adjust the height of the saddle, after the
adjustment is done, tighten the screw or clip locking the support.
Lataa käyttöohje suomalainen (PDF, 9.21 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Sharp BK-CM03-EBL Sähköavusteinen polkupyörä arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Sharp BK-CM03-EBL Sähköavusteinen polkupyörä?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Sharp BK-CM03-EBL Sähköavusteinen polkupyörä:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Sharp BK-CM03-EBL Sähköavusteinen polkupyörä. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Sharp. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Sharp BK-CM03-EBL Sähköavusteinen polkupyörä käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Sharp
Malli BK-CM03-EBL
Kategoria Sähköavusteiset polkupyörät
Tiedostotyyppi PDF
Tiedoston koko 9.21 MB

Kaikki käsikirjat kohteelle Sharp Sähköavusteiset polkupyörät
Lisää Sähköavusteiset polkupyörät käsikirjoja

Usein kysytyt kysymykset kohteesta Sharp BK-CM03-EBL Sähköavusteinen polkupyörä

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Kuinka usein minun pitäisi voidella polkupyöräketjuani? Todennettu

Normaalissa käytössä ketju on parasta voidella kerran kuukaudessa. Lisää tätä taajuutta raskaassa käytössä. Voitele myös matkan jälkeen rankkasateessa tai paljon pölyä.

Tästä oli apual (234) Lue lisää

Mikä on oikea rengaspaine polkupyörälle? Todennettu

Polkupyörän rengas on täytettävä melko voimakkaasti. Tarkka paine voi olla erilainen jokaiselle polkupyörälle ja merkille, mutta yleensä on hyvä käyttää vähintään 3,5 - 4,5 bar. Ihanteellinen paine ilmoitetaan usein renkaassa.

Tästä oli apual (199) Lue lisää

Mitä pyörän koko kertoo polkupyörästäni? Todennettu

Suuremmalla pyörällä voit kuljettaa enemmän etäisyyksiä yhdellä kierroksella. Ilman ylimääräisiä vaihteita tai muuta apua tämä maksaa usein myös enemmän vaivaa. Siksi ei ole totta, että suurempien pyörien polkupyörät menevät nopeammin.

Tästä oli apual (116) Lue lisää

Polkupyörän renkaat ovat tyhjät, vaikka en ole käyttänyt polkupyörääni pitkään, miksi näin on? Todennettu

Polkupyörän renkaat on valmistettu kumista. Tämä on luonnollinen tuote, joka on taipuvainen kuivumaan. Tämä voi johtua altistumisesta auringonvalolle tai pitkiä aikoja. Kuivunut rengas voi halkeilla tai laskea ensimmäisen ajon aikana.

Tästä oli apual (115) Lue lisää
Käyttöohje Sharp BK-CM03-EBL Sähköavusteinen polkupyörä

Liittyvät tuotteet

Aiheeseen liittyvät luokat

×
Download