Käyttöohje SafeHome 278060 Kantavuuden jatkaja

Tarvitsetko käyttöoppaan SafeHome 278060 Kantavuuden jatkaja? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 2 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

MANUAL
WiFi - Repeater
Power indicator
Wireless indicator
WPS indicator
LAN indicator
WPS Button
Introduction
The WiFi Repeater is a combined wired/wireless network con-
nection device designed specifically for small business, office,
and home office networking requirements. It allows a wireless
network to be expanded using multiple access points without
the need for a wired backbone to link them. It also works well
with other 11b/g and 11n protocol wireless products.
Package Contents
1 Wireless WiFi Repeater
1 RJ-45 networking cable
Manual
Configuring WiFi repeater with WPS
If your router have a WPS button, you can configure your
router in a few seconds.
Set WiFi repeater in a slot immediately next to your router (eg.
use an extension cord). Press the WPS button on the repeater
and hold for 10 seconds.
Then press the WPS button on the router, and hold for a few
seconds.
Now, WiFi Repeater get the configuration from the router and
can be seen on the network as “WiFi Repeater”.
The key for WiFi repeater is now the same as for the router.
Are there problems with WPS setup, you must read the
instruction manual for your router to see if it needs a different
approach.
Connecting devices to the wireless system
By connecting computers, tablets or smartphones to the wire-
less system, use the same key as for your router.
Does your unit have WPS, read in the units manual for how to
connect to WiFi repeater.
Configuring the WiFi Repeater
WiFi repeater can be configured by connecting an RJ45
network cable from the computer to the repeater, or it can be
done wirelessly.
Wireless configuration (Windows)
• Set the repeater into a socket
• Click on the computer network icon
in the lower right corner, and
you will see a list of networks,
the is possible to connect.
Here you need to connect to the “WiFi
Repeater”.
• Then open a web browser and type: http://192.168.10.1 in
the browser address field.
This address is the preset address of the WiFi Repeater.
If you can not connect to the preset address, you can try
resetting the repeater, by holding the reset button for 30
seconds. Wait for WiFi repeater again on the list of possible
network.
The login screen below will appear. Enter the “User Name”
and “Password” then click “OK” to login.
The default User name is “admin” and Password is “admin”.
After logging in, you will see the web page below:
Click on ‘Repeater’ to continue.
Select your Wireless network to continue
When you see below, please do not change any setting but
only insert the key of your network.
I basic settings:
Nothing to be changed.
Configuring The wireless Acces Point (AP) mode
After login, select the AP in the main menu to configure the
WiFi repeater to the AP.
Follow the instructions on the screen.
Reset the repeater to factory settings
Press and hold the reset button for 30 seconds.
More possibilities in the repeater
Once you are logged in to the WiFi repeater, you can change
the administrator password, you can upgrade the device
firmware, or you can backup the settings and reinstall settings
from a backup.
Resetting to factory settings
Hold the reset button on the device side inside 30 seconds
and the unit is reset.
Disclaimer
SafeHome ApS accept no liability for any errors or omissions
in any respect.
This product should not be operated by children or persons
who are likely not to have adequate psyche or physique to
operate it properly. Operation is always supported by compe-
tent adult user. The product is not a toy and should never be
used as such.
Possibly. corrections will be made without further notice.
We disclaim any responsibility for errors, accidents, dam-
age and accidents arising from the use of SafeHome WiFi
Repeater model: 278060-NORDICX.
For support and more information: www.safehome.dk
Lataa käyttöohje suomalainen (PDF, 1.09 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi SafeHome 278060 Kantavuuden jatkaja arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen SafeHome 278060 Kantavuuden jatkaja?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi SafeHome 278060 Kantavuuden jatkaja:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi SafeHome 278060 Kantavuuden jatkaja. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen SafeHome. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen SafeHome 278060 Kantavuuden jatkaja käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki SafeHome
Malli 278060
Kategoria Kantavuuden jatkajat
Tiedostotyyppi PDF
Tiedoston koko 1.09 MB

Kaikki käsikirjat kohteelle SafeHome Kantavuuden jatkajat
Lisää Kantavuuden jatkajat käsikirjoja

Usein kysytyt kysymykset kohteesta SafeHome 278060 Kantavuuden jatkaja

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Mitä eroa on alueen laajentimen ja tukiaseman välillä? Todennettu

Suurin ero on, että tukiasema on yleensä kytketty modeemiin tai reitittimeen kaapelilla. Alueen laajennin vahvistaa olemassa olevan langattoman signaalin.

Tästä oli apual (213) Lue lisää

Voinko kytkeä etäisyyslaajentimen toisen etäisyyslaajentimen signaaliin? Todennettu

Kyllä, tämä on mahdollista useimmissa malleissa. Huomaa, että toistuvan signaalin laatu voi olla heikompi kuin yhdistettäessä suoraan reitittimeen.

Tästä oli apual (122) Lue lisää
Käyttöohje SafeHome 278060 Kantavuuden jatkaja

Liittyvät tuotteet

Aiheeseen liittyvät luokat