TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 169.
1. Work table
2. Bevel angle lock lever
3. On/off switch
4. Battery port
5. Height and bevel adjustment wheel
6. Adjustment wheel handle
7. Mitre guide
8. Saw blade guard
9. Anti-kickback pawls
10. Rip fence
11. Saw blade
12. Riving knife
13. Throat plate
14. Throat plate lock knob
15. Dust port
16. Storage (mitre gauge, riving knife, wrenches)
17. Mounting hole
18. Push stick
19. Dust port adaptor
20. Hex key
21. Closed end blade wrench
22. Open end blade wrench
23. Operator’s manual
24. Bolt
25. Washer
26. Hex nut
27. Screwdriver
28. Battery pack
29. Charger
MAINTENANCE
■ Do not modify the product in any way or use accessories
not approved by the manufacturer. Your safety and that
of others may be compromised.
■ Do not use the product if any switches, guards, or
other functions does not work as intended. Return to
an authorised service centre for professional repair or
adjustment.
■ Do not make any adjustments whilst the saw blade is
in motion.
■ Always make sure the battery pack has been removed
from the product before making adjustments, lubricating
or when doing any maintenance on the product.
■ Before and after each use, check the product for
damage or broken parts. Keep the product in top
working condition by immediately replacing parts with
spares approved by the manufacturer.
■ The blade has sharp edges and may also remain hot
after cutting operations. Exercise extreme caution when
cleaning an exposed blade. Wear gloves to protect
yourself from personal injury.
■ Clean the saw and its accessories from dust regularly,
especially moving parts including the blade guard.
Use a hand brush or vacuum cleaner to remove dust
effectively. Do not use compressed air.
■ For greater safety and reliability, all repairs, including
changing brushes, should be performed by an authorised
service centre.
WARNING! Do not attempt to disassemble the blade
guard assembly for cleaning or repair. Damaged guards
should not be used. Return to an authorised service centre
for repair or replacement.
SYMBOLS ON THE PRODUCT
Safety alert
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
Please read the instructions carefully
before starting the product.
Wear ear protection.
Wear eye protection.
Wear safety gloves.
Keep hands away from the cutting area and
sharp blade.
Do not expose to rain or use in damp
locations.
Blade width of cut (kerf)
Number of teeth on this saw blade
For cutting wood and analogous material
Not for cutting metals
ENGLISH
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
7
Original Instructions
Keskustele tuotteesta
Täällä voit jakaa mielipiteesi Ryobi RTBS18X-0 Pöytäsaha:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.