Käyttöohje Ryobi CDC1802 Porakone-ruuvinväännin

Käyttöohje

1

English

GB

FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR

SPECIFIC SAFETY RULES

■ Wear ear protectors with impact drills. Exposure

to noise can cause hearing loss.

■ Use auxiliary handles supplied with the tool. Loss

of control can cause personal injury.

■ Hold tool by insulated gripping surfaces when

performing an operation where the cutting tool

may contact hidden wiring. Contact with a “live”

wire will also make exposed metal parts of the tool

“live” and shock the operator.

■ Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations,

as well as the specific potential hazards related

to this tool. Following this rule will reduce the risk of

electric shock, fire, or serious injury.

■ Always wear safety glasses with side shields.

Everyday glasses have only impact resistant lenses.

They are NOT safety glasses. Following this rule will

reduce the risk of eye injury.

■ Protect your lungs. Wear a face or dust mask

if the operation is dusty. Following this rule will

reduce the risk of serious personal injury.

■ Protect your hearing. Wear hearing protection

during extended periods of operation. Following

this rule will reduce the risk of serious personal

injury.

■ Battery tools do not have to be plugged into

an electrical outlet; therefore, they are always

in operating condition. Be aware of possible

hazards when not using your battery tool or

when changing accessories. Following this rule

will reduce the risk of electric shock, fire, or serious

personal injury.

■ Do not place battery tools or their batteries near

fire or heat. Following this rule will reduce the risk of

explosion and possibly injury.

■ Never use a battery that has been dropped or

received a sharp blow. A damaged battery is

subject to explosion. Properly dispose of a dropped

or damaged battery immediately.

■ Batteries can explode in the presence of a

source of ignition, such as a pilot light. To reduce

the risk of serious personal injury, never use any

cordless product in the presence of open flame. An

exploded battery can propel debris and chemicals.If

exposed,flush with water immediately.

■ Do not charge battery tool in a damp or wet

location.Following this rule will reduce the risk of

electric shock.

■ For best results, your battery tool should be

charged in a location where the temperature is

more than 10°C but less than 38°C. Do not store

outside or in vehicles.

■ Under extreme usage or temperature conditions,

battery leakage may occur. If liquid comes in

contact with your skin, wash immediately with

soap and water, then neutralize with lemon juice

or vinegar. If liquid gets into your eyes, flush

them with clean water for at least 10 minutes,

then seek immediate medical attention. Following

this rule will reduce the risk of serious personal

injury.

■ Save these instructions. Refer to them frequently

and use them to instruct others who may use this

tool. If you loan someone this tool, loan them these

instructions also to prevent misuse of the product

and possible injury.

DESCRIPTION

1. Torque Adjustment Ring

2. Keyless Chuck

3. Switch Trigger

4. Mag Tray

TM

5. Rotation Selector

6. Two- Speed Gear Switch (Hi – Lo)

7. Level

8. Battery Pack(not included)

9. Latches

10. Chuck Body

11. Unlock(Release)

12. Lock(Tighten)

13. Chuck Collar

14. Forward

15. Reverse

16. High Speed

17. Low Speed

18. To Decrease Torque

19. To Increase Torquee

20. Bit

21. Chuck Jaws

FEATURES

Voltage 18 V

Chuck (mm) 0-10 mm

Switch Variable speed

No load speed (drill mode): 0-350/0-1300 min-

1

Max. Torque (Nm) 42.6

Weight - console (KG) 1.27

961075042-01.indd Sec1:1961075042-01.indd Sec1:1 7/13/09 6:03:14 PM7/13/09 6:03:14 PM

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Ryobi CDC1802 Porakone-ruuvinväännin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Ryobi. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Ryobi CDC1802 Porakone-ruuvinväännin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Ryobi Porakone-ruuvinvääntimet
Lisää Porakone-ruuvinvääntimet käsikirjoja

Usein kysytyt kysymykset kohteesta Ryobi CDC1802 Porakone-ruuvinväännin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Ryobi CBD-1201 Porakone-ruuvinväännin

Käyttöohje

Ryobi RPD18C Porakone-ruuvinväännin

Käyttöohje

Ryobi CHD-1442 Porakone-ruuvinväännin

Käyttöohje

Ryobi RCD1802 Porakone-ruuvinväännin

Käyttöohje

Ryobi RAD18C-0 Porakone-ruuvinväännin

Käyttöohje

Ryobi CDD-1442 Porakone-ruuvinväännin

Käyttöohje

Ryobi R18PD5-0 Porakone-ruuvinväännin

Käyttöohje

Ryobi RDD18X-0 Porakone-ruuvinväännin

Aiheeseen liittyvät luokat