Käyttöohje Russell Hobbs 22520-56 AutoSteam Silitysrauta

Tarvitsetko käyttöoppaan Russell Hobbs 22520-56 AutoSteam Silitysrauta? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 4 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

5
VERTICAL STEAMING
Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
Check that there’s adequate ventilation behind the fabric, otherwise moisture may build
up, causing mildew.
Check that there’s nothing behind the fabric that may be damaged by the steam.
Check that pockets, turn-ups, and cuffs are empty.
Check that there’s water in the reservoir.
1. Set the temperature control to max.
2. Hold the iron close to (but not touching) the fabric.
3. Press the button (youre using the “shot of steam” function vertically).
4. Leave 4 seconds between shots, to let the temperature build up.
AFTER USE
1. Set the temperature control to .
2. Unplug the iron.
3. Open the cover.
4. Hold it over a sink, turn it upside down, and drain the water from the reservoir, via the
water inlet.
5. Close the cover.
6. Sit the iron on its heel.
7. Leave it to cool down completely.
8. When it’s cold, wipe off any moisture, and wind the cable round the heel.
9. Store the iron on its heel, to avoid corrosion and damage to the soleplate.
SELF CLEAN
To avoid scale build up, use the self clean function at least monthly in normal water areas, more
often in hard water areas.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
1. Fill the reservoir to the max mark.
2. Set the temperature control to max.
3. Sit the iron on its heel.
4. Put the plug into the power socket and wait till the light goes out.
5. Hold the iron over the basin or bowl with the soleplate down.
6. Press the C, and hold it down.
7. Gently move the iron to and fro, over the basin or bowl.
8. Water and steam will wash scale and dust through the soleplate, and into the sink.
9. When the reservoir is empty, release the C button.
10. When it’s cold, wipe off any moisture, and wind the cable round the heel.
11. Store the iron on its heel, to avoid corrosion and damage to the soleplate.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn’t be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
Lataa käyttöohje suomalainen (PDF, 1.1 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Russell Hobbs 22520-56 AutoSteam Silitysrauta arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Russell Hobbs 22520-56 AutoSteam Silitysrauta?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Russell Hobbs 22520-56 AutoSteam Silitysrauta:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Russell Hobbs 22520-56 AutoSteam Silitysrauta. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Russell Hobbs. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Russell Hobbs 22520-56 AutoSteam Silitysrauta käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Russell Hobbs
Malli 22520-56 AutoSteam
Kategoria Silitysraudat
Tiedostotyyppi PDF
Tiedoston koko 1.1 MB

Kaikki käsikirjat kohteelle Russell Hobbs Silitysraudat
Lisää Silitysraudat käsikirjoja

Usein kysytyt kysymykset kohteesta Russell Hobbs 22520-56 AutoSteam Silitysrauta

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Voinko puhdistaa silitysraudani pohjan hankauslaitteella? Todennettu

Ei, tämä voi vahingoittaa pohjaa. Puhdista se kostealla liinalla tai pehmeällä sienellä.

Tästä oli apual (424) Lue lisää

Mitä eroja on höyrysilitysraudalla ja tavallisella silitysraudalla? Todennettu

Höyrysilitysraudan suurin etu on, että se poistaa ryppyjä helpommin höyryn käytön ansiosta. Tavallinen silitysrauta on päinvastoin paljon kevyempi ja usein halvempi.

Tästä oli apual (346) Lue lisää

Silitysraudani pohja on värjäytynyt, voinko silittää silti sen kanssa? Todennettu

Se on mahdollista, mutta on mahdollista, että se hankaa vaaleat vaatteet.

Tästä oli apual (287) Lue lisää

Voinko silittää nappeja? Todennettu

Ei, se vahingoittaa silitysraudan pohjaa ja estää rautaa toimimasta oikein. Älä koskaan silitä nappeja, vetoketjuja tai muita kovia esineitä.

Tästä oli apual (238) Lue lisää
Käyttöohje Russell Hobbs 22520-56 AutoSteam Silitysrauta

Liittyvät tuotteet

Aiheeseen liittyvät luokat

×
Download