Käyttöohje Philips GC130 Silitysrauta

Tarvitsetko käyttöoppaan Philips GC130 Silitysrauta? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 5 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

ENGLISH
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benet from the support that Philips offers,
register your product at www.philips.com/welcome.
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
Never immerse the iron in water.
Warning
Check if the voltage indicated on the type plate
corresponds to the local mains voltage before you
connect the appliance.
Do not use the appliance if the plug, the mains cord
or the appliance itself shows visible damage, or if the
appliance has been dropped.
If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid
a hazard.
Never leave the appliance unattended when it is
connected to the mains.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Do not let the mains cord come into contact with
the hot soleplate of the iron.
Caution
Only connect the appliance to an earthed wall
socket.
Check the mains cord regularly for possible damage.
Always place and use the iron on a stable, level and
horizontal surface.
The soleplate of the iron can become extremely hot
and may cause burns if touched.
When you have nished ironing, when you clean the
appliance and also when you leave the iron even for
a short while: put the iron on its heel and remove
the mains plug from the wall socket.
The appliance is intended for household use only.

This Philips appliance complies with all standards
regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user
manual, the appliance is safe to use based on scientic
evidence available today.

1 Remove any sticker or protective foil from the
soleplate.
2 Let the iron heat up to maximum temperature and
pass the iron over a piece of damp cloth for several
minutes to remove any residues from the soleplate.


1 Put the iron on its heel.
2 To set the required ironing temperature, turn the
temperature dial to the appropriate position (Fig. 1).
Check the laundry care label for the required ironing
temperature:
1 Synthetic fabrics (e.g. acrylic, viscose, polyamide,
polyester)
1 Silk
2 Wool
3 Cotton, linen
If you do not know what kind or kinds of fabric an article
is made of, determine the right ironing temperature by
ironing a part that is not visible when you wear or use
the article.
Silk, woollen and synthetic materials: iron the reverse side
of the fabric to prevent shiny patches.
Start ironing the articles that require the lowest ironing
temperature, such as those made of synthetic bres.
3 Put the mains plug in an earthed wall socket.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Ironing
Note: The iron may give off some smoke when you use it for
the rst time. This stops after a short while.
1 Set the recommended ironing temperature
(see section ‘Setting the temperature’ above).
2 Specictypesonly:Lettheironheatupfortwo
minutes.
If you set the temperature dial to a lower setting after
ironing at a high temperature, let the iron cool down for
ve minutes before you continue ironing.
3 Specictypesonly:lettheironheatupuntilthe
temperaturelightrstgoesoutandthengoeson
again (Fig. 2).
Note: The temperature light goes on from time to time
during ironing.
4 Start ironing.
Cleaning
1 Remove the mains plug from the wall socket and let
the iron cool down.
2 Wipe the soleplate with a damp cloth and a non-
abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with
metal objects. Never use a scouring pad, vinegar or
other chemicals to clean the soleplate.
3 Clean the upper part of the iron with a damp cloth.
Storage
1 Remove the mains plug from the wall socket.
2 Wind the mains cord round the cord storage
facility (Fig. 3).
3 Store the iron on its heel in a safe and dry place.
Environment
Do not throw away the appliance away with the
normal household waste at the end of its life,
but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 4).

If you need service or information or if you have a
problem, please visit the Philips website at www.philips.
com or contact the Philips Consumer Care Centre
in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Consumer
Care Centre in your country, go to your local Philips
dealer.

This chapter summarises the most common problems
you could encounter with the appliance. If you are unable
to solve the problem with the information below, contact
the Consumer Care Centre in your country.
Problem Possible cause Solution
The iron is plugged
in but the soleplate
is cold.
There is a connection
problem.
Check the mains cord, the plug
and the wall socket.
The temperature dial
is set to MIN.
Set the temperature dial to the
required position.
-
4239.000.4777.4
2/8
Lataa käyttöohje suomalainen (PDF, 0.39 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Philips GC130 Silitysrauta arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Philips GC130 Silitysrauta?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Philips GC130 Silitysrauta:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Philips GC130 Silitysrauta. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Philips. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Philips GC130 Silitysrauta käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Philips
Malli GC130
Kategoria Silitysraudat
Tiedostotyyppi PDF
Tiedoston koko 0.39 MB

Kaikki käsikirjat kohteelle Philips Silitysraudat
Lisää Silitysraudat käsikirjoja

Usein kysytyt kysymykset kohteesta Philips GC130 Silitysrauta

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Voinko puhdistaa silitysraudani pohjan hankauslaitteella? Todennettu

Ei, tämä voi vahingoittaa pohjaa. Puhdista se kostealla liinalla tai pehmeällä sienellä.

Tästä oli apual (365) Lue lisää

Mitä eroja on höyrysilitysraudalla ja tavallisella silitysraudalla? Todennettu

Höyrysilitysraudan suurin etu on, että se poistaa ryppyjä helpommin höyryn käytön ansiosta. Tavallinen silitysrauta on päinvastoin paljon kevyempi ja usein halvempi.

Tästä oli apual (297) Lue lisää

Silitysraudani pohja on värjäytynyt, voinko silittää silti sen kanssa? Todennettu

Se on mahdollista, mutta on mahdollista, että se hankaa vaaleat vaatteet.

Tästä oli apual (245) Lue lisää

Voinko silittää nappeja? Todennettu

Ei, se vahingoittaa silitysraudan pohjaa ja estää rautaa toimimasta oikein. Älä koskaan silitä nappeja, vetoketjuja tai muita kovia esineitä.

Tästä oli apual (169) Lue lisää

Philips-silitysraudan pohjassa on naarmuja, voinko silti käyttää sitä? Todennettu

Kyllä, tämä ei ole ongelma. Pohja on valmistettu useista kerroksista ja se kestää pieniä naarmuja. Rauta toimii edelleen kuten pitäisi.

Tästä oli apual (50) Lue lisää
Käyttöohje Philips GC130 Silitysrauta

Liittyvät tuotteet

Aiheeseen liittyvät luokat