Käyttöohje LivarnoLux IAN 273018 Lamppu

Käyttöohje

7 GB/IE

Safety / Preparing the product for use

To avoid danger to

life from electric shock

Every time before connecting the lamp the mains,

check it and the mains lead for damage. Never

use your light if you find it is damaged in any way.

CAUTION! A damaged light bulb means your

life is at risk from electric shock. If there is any

damage, repairs to be carried out or other

problems related to the light bulb, please contact

the service centre or a qualified electrician.

In order to prevent hazards, if the outer flexible

cable of this lamp becomes damaged it may

only be replaced by the manufacturer, a service

representative of the manufacturer or a similar

specialist!

Before assembly, ensure that the mains voltage

available corresponds to the operating voltage

necessary of the light (230–240 V ∼).

Never let the lamp come into contact with water

or other liquids.

Always unplug the light from the mains prior to

assembly, disassembly, cleaning or if the light

will not be used for extended periods.

Never open or insert anything into electrical

fittings or equipment. Doing this sort of thing can

lead to a serious danger to life from electric shock.

To avoid danger

of fire and injury

CAUTION! RISK OF INJURY! Check bulbs

for damage immediately after unpacking. Do

not fit defective bulbs into the light. If they are,

contact the service point for a replacement.

CAUTION! RISK OF INJURY FROM

BURNS! Ensure the lamp has been switched

off and allowed to cool before you touch it. In

this way you will avoid the danger of burns.

Bulbs give off a lot of heat around the top of

the lamp.

Do not cover the light or the mains plug with

objects. Excessive heat can result in a fire.

Never leave the lamp operating unattended.

Do not allow the lamp or the packaging materials

to lie around unattended. Plastic film or bags,

Styrofoam etc. can turn into dangerous toys for

children.

ATTENTION!

Do not look into the LED from a close distance

during operation.

Do not look at the LED with an optical instru-

ment (e.g. magnifier).

The LED lights cannot be replaced.

Working safely

Install the light so that it is protected from

moisture and dirt.

Prepare carefully before assembly and allow

yourself enough time. Lay out all the individual

components and additional tools or materials

required so that you can see and reach them.

Remain alert at all times and always watch what

you are doing. Always proceed with caution

and do not assemble the lamp if you cannot

concentrate or feel unwell.

Preparing the product for use

Assembling the lamp

Note: You will require a second person to help

with the assembly of the product.

Note: Please ensure that you pull the cable during

fitting slowly through the base.

Remove the transport lock

6

from the support

tube.

First insert the support tube

14

into the upper

support tube

15

of the torchiere and tighten.

Ensure not to pinch the mains lead running

through the support tube

14

.

Insert the support tube

7

for the reading light

into the flexible arm

3

and tighten.

Slide the support tube guide

13

over the

support tubes.

Insert the floor lamp with both support tubes

7

,

14

into the designated holes in the base

9

.

Place the serrated washers

10

over the support

tubes

7

,

14

on the underside of the base

9

.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi LivarnoLux IAN 273018 Lamppu. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen LivarnoLux. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen LivarnoLux IAN 273018 Lamppu käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle LivarnoLux Lamput
Lisää Lamput käsikirjoja

Usein kysytyt kysymykset kohteesta LivarnoLux IAN 273018 Lamppu

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

LivarnoLux IAN 103057 Lamppu

Käyttöohje

LivarnoLux IAN 102617 Lamppu

Käyttöohje

LivarnoLux IAN 113976 Lamppu

Käyttöohje

LivarnoLux IAN 66248 Lamppu

Käyttöohje

LivarnoLux IAN 90546 Lamppu

Käyttöohje

LivarnoLux IAN 103792 Lamppu

Käyttöohje

LivarnoLux IAN 101056 Lamppu

Käyttöohje

LivarnoLux IAN 113908 Lamppu

Aiheeseen liittyvät luokat