Käyttöohje Hoover ST71_ST20011 Pölynimuri

Käyttöohje

3

*Certain Models Only ** Certain models only, nozzles may vary according to model

All accessories can be tted to the end of the hose handle or to the end of the xed tube

(excpet for dusting brush).

The Crevice Nozzle and Furniture nozzle are stored on the tube, while the Dusting brush

is stored underneath the hose handle.

Crevice Tool* – For corners and hard to reach areas. [X1]

Furniture Nozzle* – For soft furniture and fabrics. [X3]

Dusting Brush* – For bookshelves, frames, keyboards and other delicate areas. To

extend the brushes push the button on the body of the tool. [X2]

Parquet Nozzle* – For parquet oors and other delicate oors. [AA]

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet

hair removal. [Y]

Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for

deep cleaning on textile surfaces and other hard to clean areas, particularly suitable for

allergen removal. [Z]

IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and

carpet pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.

CLEANER MAINTENANCE

Emptying the Dust Container

When the dust ap touches the

full bin mechanical detector

at the bottom of the cleaner

main body, you will hear an alarm sound, and the bin full indicator on the electronic display

panel will also illuminate. This indicates that the dust bin is completely full and needs to be

emptied.

IMPORTANT: To maintain optimum performance do not allow the cleaner to continue

when the dust container is full.

1. Release the container bin handle by pressing the bin release latch to detach the dust

container from the main cleaner and pull upward to remove. [8]

2.

Once the dust container is released from the main body, hold it by the handle grip

and

position it above a waste container. With the other hand press the bin ap release

button to open the container and release the dust, to fully release all the dust slide the

outer bin body [9] up & down along the inner bin body.

3.

Once emptied, close the dust ap and ret to the cleaner ensuring locating hook has been

positioned correctly in cleaner body [13], once complete lock container in place by pushing

the container bin handle down until the latch connects with the main

body of the cleaner,

you will hear a click when fully connected. This is the opposite to step 1.

4. Connect plug back into power source and continue.

NOTICE: Ensure the power cord has been unplugged before emptying.

NOTICE: Ensure the bin ap has been closed before you ret it to the main body.

Unblocking the compaction system

If the auger [L1] of the compaction unit is blocked, it will try to recover 3 times. If it

cannot recover, then you will hear an alarm sound and the electronic display panel on the

main body will illuminate indicating BLOCKED. This tells you that you must remove the

blockage before continuing.

IMPORTANT: If the auger [L1] on the compaction unit blocks, please ensure you stop

using your cleaner immediately and unblock as per the following.

1. Release the container bin handle by pressing the bin release latch to detach the dust

container from the main cleaner and pull upward to remove. [8]

2.

Hold the bin handle with one hand rotate the inner bin body in the direction shown to

release dust container from dust container body. Empty dust container and clear any

blockages from the auger [L1] or cyclone

unit. [10]

3.

After removing the blockage and cleaning the multi cyclone, [11] clear and ensure the

FDT ap [L2] is free from hair and debris, reassemble the dust container back into the

dust container body [12] and lock in position by rotating the inner dust container.

4.

Ret dust container to the cleaner ensuring locating hook has been positioned correctly

in cleaner body, [13] once complete then lock container in place by pushing container bin

handle down until the latch connects with the main body of the cleaner, you will hear a

click when fully connected. This is the opposite to step 1.

5. Connect plug back into power source and continue.

NOTICE: Ensure the power cord has been unplugged before removing the blockage.

NOTICE: Ensure the bin ap has been closed before you ret it to the main body.

Cleaning the washable lters

The cleaner is tted with a lter pack, to maintain optimum cleaning performance these

should be removed on a regular basis and the lters tapped gently to release any excess

dust. The lters should also be washed every 3 months and replaced on a regular basis.

IMPORTANT: All bagless cleaners require regular lter cleaning. Failure to clean your

lter may result in air blockage, overheating and product failure. This may invalidate your

guarantee.

IMPORTANT:

Regularly check and maintain the lters.

IMPORTANT:

Always ensure the lter pack is fully dry before use.

To access the Pre-Motor lter:

IMPORTANT: Switch off and unplug the power cord before accessing the lters.

1.

Unlock the dust container by pressing the bin release latch to detach the dust container

from the main cleaner and pull upward to remove. [13]

2. Unlock the pre-motor lter cover by pressing pre-motor lter cover latch and rolling pre-

motor lter cover on the opposite edge.

[14]

3. Remove the micro lter from main cleaner and wash micro lter by hand using warm

water. Do not use hot water or detergents. Remove excess water from the lter and

leave to dry fully before reusing.

[15,18,19]

4. Reassemble to lter pack and ret to the cleaner once fully dry. Press on the top of the

lter to ensure it is back into place.

5. Lock the pre-motor lter cover by pressing at the top point, you will hear a click once the

pre-motor lter cover ts into place.

6. Ret dust container to the cleaner ensuring locating hook has been positioned correctly

GB

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hoover ST71_ST20011 Pölynimuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hoover. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hoover ST71_ST20011 Pölynimuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Hoover Pölynimurit
Lisää Pölynimurit käsikirjoja

Usein kysytyt kysymykset kohteesta Hoover ST71_ST20011 Pölynimuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Hoover HP220PAR 011 Pölynimuri

Käyttöohje

Hoover HP322PET 011 Pölynimuri

Käyttöohje

Hoover KS51PET 011 550W Pölynimuri

Käyttöohje

Hoover HF110P 011 Pölynimuri

Käyttöohje

Hoover HF210H 011 Pölynimuri

Käyttöohje

Hoover HF910H 011 Pölynimuri

Käyttöohje

Hoover HP710PAR 021 Pölynimuri

Käyttöohje

Hoover HGO710 011 Pölynimuri

Aiheeseen liittyvät luokat