Käyttöohje Hoover LA71_LA10011 Pölynimuri

Tarvitsetko käyttöoppaan Hoover LA71_LA10011 Pölynimuri? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 9 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

3
*Certain Models Only ** Certain models only, nozzles may vary according to model
2 in 1 Tool [V] – combines several functions into one tool:
Crevice Tool – For corners and hard to reach areas.
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.
Parquet Nozzle* [Y] – For parquet oors and other delicate oors.
Pet Hair Remover Mini Turbo Nozzle* [W]- Use the mini turbo nozzle on stairs or for
deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for
pet hairs removal.
Allergen Remover Mini Turbo Nozzle* [X] – Use the mini turbo nozzle on stairs or for
deep cleaning on textile surfaces and other hard to clean areas, particularly suitable for
allergen removal.
IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and
carpet pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.
CLEANER MAINTENANCE
Emptying the Dust Container
When the dust reaches the max level indicator on the container, empty the dust container.
IMPORTANT: To maintain optimum performance, do not allow the dust to exceed the
max level.
1. Turn off the cleaner with the main switch and unplug the power cable. [9]
2. Press the bin release button and remove the container from the cleaner.
[10]
3. Hold the dust container with one hand, and push the container ap release button to
empty the container.
[11]
4. Close the dust container ap and ret to the cleaner main body.
Cleaning the Washable Filters
The cleaner is tted with pre motor lter and exhaust lter. To maintain optimum cleaning
performance, regularly remove the lters and tap against the side of the bin to release
dust. The lters should be washed every 5 cassette empties or when the lter has
excessive dust level.
IMPORTANT: All bagless cleaners require regular lter cleaning. Failure to clean your
lters may result in air blockage, overheating and product failure. This may invalidate
your guarantee.
IMPORTANT: Regularly check and maintain the lters.
IMPORTANT: Always ensure the lter pack is fully dry before use.

1. Remove the dust container from the cleaner.
[10]
2. Hold the dust container with one hand and with the other hand press the dust container
lid release button to open the container lid.
[12]
3. Remove the pre-motor lter assembly from container.
[13]
4. Gently tap and wash the pre-motor lter. Do not use hot water or detergents. Remove
excess water from the lter and leave to dry fully before re-using.
[16,20]
5. Reassemble the pre-motor lter assembly once fully dry and ret to the cleaner.
[14]

1. Unclip the exhaust lter cover from the rear of the cleaner main body.
[17]
2. Remove the exhaust lter from the rear of the cleaner.
[18]
3. Gently tap and wash the lter using warm water. Do not use hot water or detergents.
Remove excess water from the lter and leave to dry fully before re-using.
[19, 20]
4. Ret the exhaust lter to the rear of the cleaner once fully dry and ret the exhaust
lter cover.
[18,17]
IMPORTANT: Do not use the product without the lter pack tted.
Cleaning the dust container / separation unit
This cleaner uses a separation system unique to Hoover. If necessary the separation unit
can be disassembled from the dust container and cleaned.
1. Press the dust container release button and remove the container from the cleaner. [10]
2. Hold the container with one hand and with the other hand press the dust container lid
release button to open the container lid.
[12]
3. Remove the pre-motor lter from dust container assembly.
[13]
And then remove the
vortex nder from the cyclone body.
[14]
4. Remove the cyclone body from the dust container.
[15]
5. If necessary, use a cloth to remove excessive dust from the vortex nder surface and
the cyclone body surface.
6. Place the dust container under the tap. Rinse with lukewarm water. Wash internal
surfaces of the dust container with water only.
[16]
DO NOT use soap detergents to
wash the internals of the dust container.
7. Reassemble the internal component to the dust container, ensuring all components
are dry.
8. Close over the dust container lid and ret dust container assembly to cleaner.
Removing a blockage
1. Check if the Dust Container is full. If so, refer to ‘Emptying The Dust Container’.
2. If the Dust Container is empty, but suction is still low:
A. Do the lters need cleaning? If so refer to ‘Cleaning the washable lters’.
B. Check if there is any other blockage in the system - Use a rod or pole to remove
any blockage from the extension tube or exible hose.
C. Check if pre-motor lter is tted.
D. Check if the separation unit needs to be cleaned. Refer to ‘Cleaning the separation
unit.
WARNING - If the cleaner is used for a signicant period of time with a blockage, a
thermal cut out will switch the cleaner off to prevent overheating. If this should happen,
switch the cleaner off, unplug and correct the fault. It will take about 45 minutes for the
cut out to automatically reset.
GB
Lataa käyttöohje suomalainen (PDF, 3.83 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Hoover LA71_LA10011 Pölynimuri arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Hoover LA71_LA10011 Pölynimuri?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Hoover LA71_LA10011 Pölynimuri:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hoover LA71_LA10011 Pölynimuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hoover. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hoover LA71_LA10011 Pölynimuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Hoover
Malli LA71_LA10011
Kategoria Pölynimurit
Tiedostotyyppi PDF
Tiedoston koko 3.83 MB

Kaikki käsikirjat kohteelle Hoover Pölynimurit
Lisää Pölynimurit käsikirjoja

Usein kysytyt kysymykset kohteesta Hoover LA71_LA10011 Pölynimuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Pölynimurini letku on tukossa, mitä voin tehdä? Todennettu

Irrota letku ja tarkasta, onko letku todella tukossa, katsomalla sen sisään. Jos letku on tukossa, voit ottaa pitkän esineen, kuten harjanvarren, ja työntää sen varovasti letkun läpi. Yleensä esineet, jotka tukkivat letkun, lähtevät tällä tavalla pois. Jos tämä ei auta, ota yhteyttä valmistajaan.

Tästä oli apual (1666) Lue lisää

Minkä kokoisia pölypusseja on? Todennettu

On otettava huomioon kaksi kokoa. Ensimmäinen on levyn koko pussin sisäänkäynnin kanssa. Tämä määrittää, sopiiko pölypussi tiettyyn pölynimuriin. Sitten on pussin koko. Tämä ilmoitetaan enimmäkseen litroina ja määrittää, kuinka paljon pölyä pussiin mahtuu.

Tästä oli apual (1212) Lue lisää

Pölynimurin virtajohto ei palaa takaisin laitteeseen, mitä voin tehdä? Todennettu

On mahdollista, että johdossa on kierre tai taite. Rullaa johto kokonaan ulos muutama kerta ja kelaa se takaisin laitteeseen käsien ohjaamana. Jos tämä ei ratkaise ongelmaa, on mahdollista, että johdon kelausmekanismi on rikki. Ota tällöin yhteyttä valmistajaan tai korjauspalveluun.

Tästä oli apual (861) Lue lisää

Kuinka poistan pölyn ja hiukset pölynimurin harjaspäästä? Todennettu

Pölyn ja hiusten poisto pölynimurin harjaspäästä on tehty manuaalisesti. Jos tämä ei mene toivotulla tavalla, jäljellä olevan lian voi poistaa hienolla kampauksella.

Tästä oli apual (757) Lue lisää

Pölynimurini antaa viheltävän äänen, mitä voin tehdä? Todennettu

Tämä ongelma johtuu usein täydestä pölypussista tai suodattimesta tai kun on aukko, joka päästää ilman letkuun. Tarkista pölypussi ja suodatin ja vaihda ne tarvittaessa. Tarkista, ettei letkussa ole reikiä tai vikoja. Jos tämä ei ratkaise ongelmaa, ota yhteyttä valmistajaan.

Tästä oli apual (728) Lue lisää

Mitä asetuksia pölynimurin harjaspäässä minun pitäisi käyttää? Todennettu

Lähes kaikissa pölynimureissa on pää, jossa on säädettävä harja. Käytä harjaa koville pinnoille naarmujen ja vaurioiden estämiseksi. Sammuta harja matot.

Tästä oli apual (572) Lue lisää

Voinko käyttää paperipölypussia useammin kuin kerran? Todennettu

Tämä ei ole suositeltavaa. Pussin vesihuokoset kyllästyvät aiheuttaen menetyksiä imussa ja mahdollisesti vahingoittamalla moottoria.

Tästä oli apual (376) Lue lisää

Mikä on HEPA? Todennettu

HEPA tarkoittaa korkean hyötysuhteen hiukkasilmaa. Monissa pölynimureissa on HEPA-suodatin. HEPA-suodatin pysäyttää vähintään 85% ja enintään 99,999995% kaikista 0,3 mikrometrin (µm) tai sitä suuremmista hiukkasista.

Tästä oli apual (367) Lue lisää

Voinko käyttää tavallista pölynimuria imemään tuhkaa? Todennettu

Ei, se ei ole ehdottomasti mahdollista. Tuhka, joka näyttää jäähtyneeltä, voi silti olla lämmin tai jopa kuuma sisällä. Tavallista pölynimuria ei ole tarkoitettu tähän ja se voi aiheuttaa tulipalon. Tavallisten pölynimureiden suodattimet eivät myöskään aina sovi pidättämään erittäin pieniä hiukkasia, kuten tuhkaa. Sitten se voi päästä pölynimurin moottoriin ja vahingoittaa.

Tästä oli apual (367) Lue lisää
Käyttöohje Hoover LA71_LA10011 Pölynimuri

Liittyvät tuotteet

Aiheeseen liittyvät luokat

×
Download