Käyttöohje Hoover CU71_CU12011 Pölynimuri

Käyttöohje

CLEANER MAINTENANCE

Emptying the Dust Container

When the dust reaches the max level indicator in the container empty the dust bin.

IMPORTANT: To maintain optimum performance do not allow the dust to sit higher than

the max level.

1. Release the container by sliding the dust container release button towards the rear of

the cleaner. Lift the dust container from the cleaner main body. [14]

2. Hold the dust container over a bin with one hand and use the other hand press the

Dust Container Door Release Button. [15]

3. Close the Dust Container door and refit to the cleaner main body.

Cleaning the washable filters

The cleaner is fitted with a blue filter pack. To maintain optimum cleaning performance

regularly remove the the filters and tap against the side of the bin to release dust. The

filters should be washed after 5 container empties or when the filter has excessive dust

level.

IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your

filters may result in air blockage, overheating and product failure. This may invalidate

your guarantee.

IMPORTANT: Regularly check and maintain the filters by following the filter

maintenance instructions , it is also recommended that you purchase new filters after

every 3rd filter wash. This will maintain your cleaners performance.

IMPORTANT: Always ensure the filters are fully dry before use.

To access the pre-motor filter:

1. Release the container by sliding the dust container release button towards the rear of

the cleaner. Lift the dust container from the cleaner main body. [14]

2. Hold the dust container with one hand and with the other hand rotate the bin handle

anti clockwise to release it from the dust container. [16]

3. Remove the blue filter pack located in the dust container handle. [17]

4. Gently tap and wash the filter using warm water. Do not use hot water or detergents.

Remove excess water from the filter and leave to dry fully before re-using. [18]

5. Reassemble to filter pack once fully dry and refit to the cleaner.

IMPORTANT: Do not use the product without the filter pack fitted.

*Certain Models Only ** Certain models only, nozzles may vary according to model

To access the exhaust filter:

1. Release the container by sliding the dust container release button towards the rear of

the cleaner. Lift the dust container from the cleaner main body. [14]

2. Unclip the exhaust filter cover from the dust container cradle on the cleaner main

body. [19]

3. Using the tab remove the exhaust filter from the cleaner main body. [20]

4. Gently tap and wash the filter using warm water. Do not use hot water or detergents.

Remove excess water from the filter and leave to dry fully before re-using. [21]

3

GB

Furniture Nozzle – For soft furniture and fabrics. [13]

Parquet Nozzle* – For parquet floors and other delicate floors. [1U]

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs

removal. [1V]

Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen

removal. [1W]

Grand Turbo Nozzle* - Use the turbo nozzle for deep cleaning on carpets. [1X]

IMPORTANT: Do not use the grand turbo and mini turbo nozzles on rugs with long fringes,

animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while

the brush is rotating.

Cleaning the dust container / multi-cyclonic separation unit

This cleaner uses a multicyclonic separation system, unique to Hoover. If necessary the

separation unit can be disassembled from the dust container and cleaned.

1. Release the dust container by sliding the dust container release button towards the

rear of the cleaner. Lift the dust container from the cleaner main body. [14]

2. Hold the dust container with one hand and with the other hand rotate the dust

container handle anti clockwise to release it from the dust container. [16]

3. Remove the multicyclonic separation unit from the dust container by pulling the

handle provided. [22]

4. If necessary, use a cloth to remove excessive dust from the multi-cyclonic unit surface.. [23]

5. Reassemble the multicyclonic separation unit to the dust container and refit the filter

pack in position.

6. Reassemble the dust container handle to the bin container. Refit the dust container to

the cleaner.

Note: For stubborn dirt the multi-cyclonic separation unit, or the dust container can be washed,

but care must be taken to ensure that both are completely dry before use.

Important: For optimum performance, we recommend that the multi-cyclonic separation

system is inspected after each empty.

Removing a blockage from the cleaner

1. Check if the dust container is full. If so refer to ‘Emptying the dust container.

2. If the dust container is empty but suction is still low:

A. Do the filters need cleaning? If so refer to ‘Cleaning the washable filters’.

B. Check if there is any other blockage in the system - Use a rod or pole to remove any

blockage from the extension tube or flexible hose.

C. Check if pre-motor filter is fitted.

D.

Check if the separation unit needs to be cleaned. Refer to ‘Cleaning the separation unit’

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before

calling your local Hoover service.

•  Is there a working electricity supply to the cleaner? Please check with another electrical

appliance.

•  Is the dust bag over-lled? Please refer to ‘Cleaner Maintenance’.

•  Is the lter blocked? Please refer to ‘Cleaner Maintenance’.

•  Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.

•  Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hoover CU71_CU12011 Pölynimuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hoover. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hoover CU71_CU12011 Pölynimuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Hoover Pölynimurit
Lisää Pölynimurit käsikirjoja

Usein kysytyt kysymykset kohteesta Hoover CU71_CU12011 Pölynimuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Hoover PC18 011 Pölynimuri

Käyttöohje

Hoover HE720PET 011 Pölynimuri

Käyttöohje

Hoover HF522RPW 011 Pölynimuri

Käyttöohje

Hoover BV60PET 011 Pölynimuri

Käyttöohje

Hoover HF122EN 011 Pölynimuri

Käyttöohje

Hoover HF910P 001 Pölynimuri

Käyttöohje

Hoover TCP1805 011 Capture Pölynimuri

Käyttöohje

Hoover HP720PET 011 Pölynimuri

Aiheeseen liittyvät luokat