Käyttöohje Hoover BR71_BR10011 Pölynimuri

Käyttöohje

2

GETTING TO KNOW YOUR CLEANER

A. Suction Regulator

B. Hose Handle

C. Telescopic Tube

D. On/O Pedal

E. Exhaust lter cover

F. Carpet & Floor nozzle (GP)**

F1. Carpet Nozzle (CA)**

F2. Hard Floor Nozzle (HF)**

G. Floor type selector pedal

H. Park Slot

I. Cord reel Pedal

J. Cleaner Main Body

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. [1]

2. To release: simply press the button on the hose end and pull.

3. Connect the hose handle to the upper extension tube end [2], or accessories if required.

4. Connect the extension tube lower end to the carpet and oor nozzle [3] or accessories

if required.

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the red

marker. [4]

2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster up

and raise or lower the handle to the most comfortable cleaning position. [5]

3. Carpet & Floor Nozzle**. Press the oor type selector on the nozzle [6] to select the ideal

cleaning mode for the oor type.

Hard Floor – Brushes are lowered to protect the oor.

Carpet – Brushes are raised for the deepest clean.

4. Switch the cleaner on by pressing the on/o Pedal on the cleaner main body. [7]

5. Adjust the suction regulator on the handle to the desired level.

6. Switch o at the end of use by pressing the on/o Pedal. Unplug and press the cord reel

pedal to wind the power cord back into the cleaner.

PARKING AND STORAGE SECTION

The tube and nozzle can be parked on back of the cleaner for storage or temporary storage

while in use.

ACCESSORIES

To obtain the best performance and energy eciency #1 it is recommended that the correct

nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams

by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard oor.

A nozzle type HF is suitable for use only on hard oor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended for

occasional use only.

It is important to note that this vacuum cleaner is supplied with an Energy Label as required by

European Regulation (EU) 665/2013.

If the label shows a red prohibition circle on the left covering the carpet symbol, then this

indicates that the vacuum cleaner is not suitable use on carpets.

If the label shows a red prohibition circle on the right covering the hard oor symbol, then this

indicates that the vacuum cleaner is not suitable for use on hard oors.

#1

NOTE: Dust pick up ability carpet, dust pick up ability hard oor, and energy eciency in

accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.

All accessories can be tted to the hose handle or the end of the tubes.

2 in 1 Tool combines several functions into one tool:

Crevice Tool – For corners and hard to reach areas.

Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs

removal.

Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen

removal.

Parquet Nozzle* – For parquet oors and other delicate oors.

IMPORTANT: Do not use the Mini Turbo Nozzles on rugs with long fringes, animal hides and

carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush is rotating.

*Certain Models Only ** Certain models only, nozzles may vary according to model

K. Hose

L. Dust Container lid

M. Dust Container

N. Vortex Finder

O. Pre-motor Filter

P. Dust Container Release Button

Q. Exhaust Filter

R. 2 in 1 accessory

S. Pet Hair Remover Mini Turbo Nozzle*

T. Allergen Remover Mini Turbo Nozzle*

U. Grand Turbo nozzle*

V. Parquet Nozzle*

CLEANER MAINTENANCE

Emptying the Dust Container

When the dust reaches the max level indicator on the container, empty the dust container.

IMPORTANT: To maintain optimum performance, do not allow the dust to exceed the max level.

1. Turn o the cleaner with the main switch and unplug the power cable.

2. Press the bin release button and remove the bin assembly from the cleaner. [8]

3. Hold the dust container with one hand, and remove the dust container lid by rotating

anti-clockwise. [9]

4. Remove the pre-motor lter assembly from bin assembly. [10]

GB

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hoover BR71_BR10011 Pölynimuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hoover. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hoover BR71_BR10011 Pölynimuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Hoover Pölynimurit
Lisää Pölynimurit käsikirjoja

Usein kysytyt kysymykset kohteesta Hoover BR71_BR10011 Pölynimuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Hoover HP730ALG 011 Pölynimuri

Käyttöohje

Hoover TCR4202 011 Rush Pölynimuri

Käyttöohje

Hoover TE29PAR 011 Pölynimuri

Käyttöohje

Hoover TE70_TE65011 Pölynimuri

Käyttöohje

Hoover HF222BPE 011 Pölynimuri

Käyttöohje

Hoover HF522LHM 011 Pölynimuri

Käyttöohje

Hoover TRTW1680011 Sprint Pölynimuri

Käyttöohje

Hoover PC18 011 Pölynimuri

Aiheeseen liittyvät luokat