Käyttöohje Hikoki H 25PV Murtovasara

Käyttöohje

3

English

DEMOLITION HAMMER SAFETY

WARNINGS

1. Wear ear protectors.

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord.

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms

to the power requirements specifi ed on the product

nameplate.

2. Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

3. When the work area is removed from the power source,

use an extension cord of suffi cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

5. Before starting to break, chip or drill into a wall, fl oor or

ceiling, thoroughly confi rm that such items as electric

cables or conduits are not buried inside.

6. Wear a mask when turning your head upward.

7. Properly set the bit holder.

8. At the start of work, confi rm screw tightening.

9. When working at a highly elevated location, pay attention

to articles and persons below.

10. Wear protective shoes to protect your feet.

11. Make positively certain that you wear gloves when

engaged in work for a long time since the grip can

become very hot.

12. There is also a risk for a tool to be damaged, and

therefore exercise utmost caution for any possible fall of

the tool when you work at an elevated place.

13. When using tools such as bull points, cutters, etc.,

make sure to use the genuine parts designated by our

company.

14. Be sure to grip the handle and cylinder case cover

portion during work. Do not hold by the grip during work.

If you pull it by mistake, the bull point could jump out.

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

H25PV : Demolition Hammer

Read all safety warnings and all instructions.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2002/96/

EC on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

Switching ON

Switching OFF

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the

accessories listed in the below.

○ Case .............................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

Demolishing concrete, chipping off concrete, grooving, bar

cutting, and driving piles.

Application examples:

Installation of piping and wiring, sanitary facility installation,

machinery installation, water supply and drainage work,

interior jobs, harbor facilities and other civil engineering

works.

SPECIFICATIONS

Voltage (by areas)

(110 V, 230 V, 240 V)

Power Input 500 W

Full-load Impact Rate 0 – 3200 min

-1

Weight

(without cord, side handle)

3.2 kg

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Mounting a tool 1 87

Dismounting a tool 2 87

Deciding working position of tool 3 87

Switch operation 4 87

How to use the demolition hammer*

1

588

Replacing carbon brushes 6 88

000Book̲H25PV.indb3000Book̲H25PV.indb3 2017/12/0710:16:302017/12/0710:16:30

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hikoki H 25PV Murtovasara. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hikoki. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hikoki H 25PV Murtovasara käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Hikoki Murtovasarat
Lisää Murtovasarat käsikirjoja

Usein kysytyt kysymykset kohteesta Hikoki H 25PV Murtovasara

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Hikoki H 41ME Murtovasara

Käyttöohje

Hikoki H 65SB3 Murtovasara

Käyttöohje

Hikoki H 45ME Murtovasara

Käyttöohje

Hikoki H 60ME Murtovasara

Käyttöohje

Makita HM1500 Murtovasara

Käyttöohje

Makita HM1200K Murtovasara

Käyttöohje

AEG PN11E Murtovasara

Käyttöohje

Makita HM1101C Murtovasara

Aiheeseen liittyvät luokat