Käyttöohje Hikoki DH 24PG2 Pyörivä vasara

Käyttöohje

4

English

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package

contains the accessories listed in the below.

○ Plastic case ................................................................ 1

○ Side handle ................................................................. 1

○ Depth gauge .............................................................. 1

○ Drill chuck holder (DH28PMY2 only) .......................... 1

Standard accessories are subject to change without notice.

APPLICATIONS

Rotation and hammering function

○ Drilling anchor holes

○ Drilling holes in concrete

○ Drilling holes in tile

Rotation only function

○ Drilling in steel or wood

(with optional accessories)

○ Tightening machine screws, wood screws

(with optional accessories)

Hammering only function

(DH24PH2, DH26PC2, DH28PCY2, DH28PMY2)

○ Light-duty chiselling of concrete, groove digging and

edging.

SPECIFICATIONS

The specifi cations of this machine are listed in the Table on

page 90.

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

MOUNTING AND OPERATION

Action Figure Page

Inserting SDS-plus tools 1 91

Removing SDS-plus tools 2 91

Selecting rotation direction 3 91

Selecting the operating mode 4 91

Adjusting the drilling depth 5 91

Changing the chisel position 6 91

Removing the quick release chuck

(DH28PMY2)*

1

792

Inserting the quick release chuck

(DH28PMY2)

892

Inserting round shank applications

tools (DH28PMY2)

992

Switching on and off and setting

the speed

10 92

Locking-on the On / Off switch 11 92

Releasing the On / Off switch 12 92

Selecting accessories*

2

–

93, 94

*1 If it is hard to pull out the drill chuck holder or the drill bit

holder, align the change lever with the

mark and turn

the lock grip.

*2 For detailed information regarding each tool, contact a

HiKOKI authorized service center.

LUBRICATION

This Rotary Hammer is of full air-tight construction to protect

against dust and to prevent lubricant leakage.

Therefore, this Rotary Hammer can be used without

lubrication for long periods. Replace the grease whenever

you change the carbon brush to maintain the service life.

Further use of the rotary hammer with lock off grease will

cause the machine to seize up reduce the service life.

CAUTION

A special grease is used with this machine, therefore,

the normal performance of the machine may be badly

aff ected by use of other grease. Please be sure to let

one of our service agents undertake replacement of the

grease.

MAINTENANCE AND INSPECTION

1. Inspecting the tools

Since use of a dull tool will cause motor malfunctioning

and degraded effi ciency, replace the tool with new ones

or resharpen them without delay when abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws be

loose, retighten them immediately. Failure to do so could

result in serious hazard.

3. Maintenance of the motor

The motor unit winding is the very “heart” of the power

tool.

Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

4. Inspecting the carbon brushes

For your continued safety and electrical shock

protection, carbon brush inspection and replacement on

this machine should ONLY be performed by a HiKOKI

Authorized Service Center.

5. Replacing supply cord

If the replacement of the supply cord is necessary, this

has to be done by the manufacturer of this agent in order

to avoid a safety hazard.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

GUARANTEE

We guarantee HiKOKI Power Tools in accordance with

statutory/country specifi c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a HiKOKI Authorized Service Center.

00Book̲DH24PG2.indb400Book̲DH24PG2.indb4 2019/03/0817:22:462019/03/0817:22:46

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hikoki DH 24PG2 Pyörivä vasara. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hikoki. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hikoki DH 24PG2 Pyörivä vasara käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Hikoki Pyörivät vasarat
Lisää Pyörivät vasarat käsikirjoja

Usein kysytyt kysymykset kohteesta Hikoki DH 24PG2 Pyörivä vasara

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Hikoki DH 24PG Pyörivä vasara

Käyttöohje

Hikoki DH 36DPA Pyörivä vasara

Käyttöohje

Hikoki DH 28PEC Pyörivä vasara

Käyttöohje

Hikoki DH 25DL Pyörivä vasara

Käyttöohje

AEG KH 7 E Pyörivä vasara

Käyttöohje

Black and Decker KD980KA Pyörivä vasara

Käyttöohje

AEG BBH 18 C Pyörivä vasara

Käyttöohje

Metabo PowerMaxx BH 12 BL 16 Pyörivä vasara

Aiheeseen liittyvät luokat