Käyttöohje Hama 00186369 Meteotime Sääasema

Käyttöohje

4

4.1 Inserting the batteries

• Open the battery compartment on the outdoor sensor and

remove the contact breaker. Close the battery compartment.

• Remove the protective lm from the base station display.

• Open the battery compartment (H) and remove the contact

breaker.

• Then close the battery compartment cover.

• A signal tone will now sound and the base station will start

searching for the DCF signal, for the outdoor sensors and for the

Meteotime signal. This search takes several minutes.

• If no time signal is received after a longer period of time, change

the location and check the reception conditions using the test

function described in 6.1.

4.2 Changing batteries / Low battery capacity

Note - Changing the batteries

• Be aware that, after every battery change on the outdoor

sensor or base station, the stations will need to be

resynchronised.

• To do this, remove the batteries from the other station and

re-insert them or change them completely if required.

Outdoor sensor

• If the

symbol (25) appears, replace the 2 AA batteries in

the outdoor sensor with 2 new batteries.

• Open the battery compartment, remove and dispose of the spent

batteries and insert two new AA batteries observing the correct

polarity. Then close the battery compartment cover.

Base station

• If the

symbol (33) appears, replace the 2 AA batteries in

the base station with 2 new batteries.

• Open the battery compartment, dispose of the spent batteries

and insert 2 new AA batteries observing the correct polarity.

Then close the battery compartment cover.

5. Installation

Note - Installation

• We recommend initially positioning the base station and

outdoor sensor at the preferred setup locations without

installing them and carrying out all the settings - as described

in 6. Operation.

• Do not install the station(s) until the settings are correct and

the radio connection is stable.

Note

• The range of the radio transmission between the outdoor

sensor and the base station is up to 50 m in unobstructed

areas.

• Before installing, make sure that the radio transmission is

not inuenced by interfering signals or obstacles such as

buildings, trees, vehicles, high-voltage power lines, etc.

• Before nal installation, make sure that there is sucient

reception between the desired installation locations.

• When installing the outdoor sensor, take care to ensure it is

positioned so that it is protected from direct sunlight and rain.

• The international standard height for measuring air

temperature is 1.25 m (4 ft) above ground.

Warning

• Buy special or suitable installation material from a specialist

dealer for wall-mounting.

• Ensure that you do not install any faulty or damaged parts.

• Never apply force during installation. These can damage the

product.

• Before mounting, check that the wall you have chosen is suitable

for the weight to be mounted. Also make sure that there are no

electric, water, gas or other lines running through the wall at

the mounting site.

• Do not mount the product above locations where persons

might sit or stand.

5.1 Base station

• Alternatively, place the base station on a at surface using the

stand (G).

• Alternatively, you can mount the base station on a wall using the

recess (I) on the back.

5.2 Outdoor sensor

• You can also set the outdoor sensor up on an even surface

outdoors.

• We recommend mounting the outdoor sensor securely and rmly

onto an outdoor wall.

• Secure the dowel, screw, nail, etc. in the wall provided.

• Hang the outdoor sensor onto it using the cut-out provided.

6.

Operation

Information - Input

Press and hold the UP or DOWN button to select the values

more quickly.

6.1 Basic setting and manual setting

After inserting the batteries, the base station automatically searches

for the DCF signal and for the Meteotime weather signal. The radio

symbol (2) ashes during the search process.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Hama 00186369 Meteotime Sääasema. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Hama. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Hama 00186369 Meteotime Sääasema käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Hama Sääasemat
Lisää Sääasemat käsikirjoja

Usein kysytyt kysymykset kohteesta Hama 00186369 Meteotime Sääasema

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Hama 00222216 Sylt Sääasema

Käyttöohje

Hama EWS-165 Sääasema

Käyttöohje

Hama 00222238 Palawan Sääasema

Käyttöohje

Hama 00222242 Usedom Sääasema

Käyttöohje

Hama TH-130 Sääasema

Käyttöohje

Hama 00222243 Cres Sääasema

Käyttöohje

Hama EWS-3000 Sääasema

Käyttöohje

Hama 00186301 Sääasema

Aiheeseen liittyvät luokat