Käyttöohje GBC ThermaBind T500Pro Nitoja

Käyttöohje

5

G

Guarantee

Operation of this machine is guaranteed for two years

from date of purchase, subject to normal use. Within

the guarantee period, ACCO Brands Europe will at its

own discretion either repair or replace the defective

machine free of charge. Defects due to misuse or use

for inappropriate purposes are not covered under the

guarantee. Proof of date of purchase will be required.

Repairs or alterations made by persons not authorised

by ACCO Brands Europe will invalidate the guarantee.

It is our aim to ensure that our products perform to the

specifications stated. This guarantee does not affect

the legal rights which consumers have under applicable

national legislation governing the sale of goods.

Register this product online at www.accoeurope.com

Heating the document

1

The cover must be inserted into the binder so the

spine is in contact with the heating element (Fig.4).

2

The binding cycle will begin automatically and is

shown visually with LED lights.

3

After completion, the green light <<ready>> comes

on and at the same time an audible signal will be

heard. This audible signal will be repeated as long as

the document is left in the binding unit.

4

After the audible signal is heard, remove the

document immediately.

Note: if the document is left in the binding unit for

too long, the quality of binding could be affected.

5

The binding unit is now ready to receive the next

cover.

Allow the document to cool

and harden

1

Jog the complete document once firmly down its

spine. This ensures that every sheet is inserted into

the glue.

2

Hold the completed document in one hand and with

thumb and one finger, squeeze the back together

to ensure that the first and last sheets are properly

bound. This will also guarantee the correct U form of

the cover spine.

3

Place the bound document into the cooling rack

to allow adequate cooling. Should any sheets be

incorrectly bound please repeat the binding operation

(Fig.5).

Multiple binds

1

The binding process can be carried out with several

copies at the same time. The heating channel will

hold a combination of documents up to 45mm in

thickness.

Folding the score mark

1

Fold back the front cover along the score mark

as this will ensure easy opening of the completed

document.

Auto shut off

1

The machine will turn off 45 minutes after the last

binding operation. An automatic security system

turns <<Off>> the binding unit.

After use

1

When all binding is complete, press the on/off switch

once again, turning the machine off.

2

Remember to remove the plug from the electricity

supply when the machine is not in use.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi GBC ThermaBind T500Pro Nitoja. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen GBC. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen GBC ThermaBind T500Pro Nitoja käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle GBC Nitojat
Lisää Nitojat käsikirjoja

Liittyvät tuotteet

Käyttöohje

GBC CombBind C110E Nitoja

Käyttöohje

GBC CombBind C200E Nitoja

Käyttöohje

GBC MultiBind 230E Nitoja

Käyttöohje

GBC WireBind W25E Nitoja

Käyttöohje

GBC MultiBind 230 Nitoja

Käyttöohje

GBC CombBind C150Pro Nitoja

Käyttöohje

GBC CombBind C340 Nitoja

Käyttöohje

GBC MultiBind 420 Nitoja

Aiheeseen liittyvät luokat