Käyttöohje GBC HeatSeal H425 Pinnoituskone

Tarvitsetko käyttöoppaan GBC HeatSeal H425 Pinnoituskone? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 0 usein kysyttyä kysymystä, 4 kommenttia ja 4 ääniä, joiden keskimääräinen tuotearvio on 25/100. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

4
Special notice
Thank you, for your recent purchase of a GBC Pouch Laminator. Your
new laminator may emit a slight odour during the initial stage of
operation. It is normal and will diminish after several hours of operation.
Service
Do not attempt to service or repair the pouch laminator yourself.
Unplug the unit and contact an authorised ACCO Brands Europe
service representative for any required repairs.
Electrical safeguards
The unit must be connected to a supply voltage corresponding to the
electrical rating shown on the unit.
Unplug the unit before moving it, or when it is not in use for an
extended period of time.
Do not operate with a damaged supply cord or plug. Do not alter the
attachment plug. The plug is configured for the appropriate electrical
supply.
Do not overload electrical outlets beyond their capacity; fire or
electrical shock could result.
The unit is intended for indoor use only.
Do not spill liquid of any kind on this product.
• Close supervision is required when this product is used near children.
General safeguards
• Use the unit only for its intended purposes of laminating documents.
Do not place anything in the throat opening of the laminator other than
pouches/documents.
Place unit on a secure, stable work area to prevent the unit from
falling and possibly causing personal injury and damage to the unit.
• Follow all warnings and instructions marked on the unit.
The socket outlet shall be installed near the equipment and shall be
easily accessible.
Do not attempt single side lamination, this will destroy the laminator.
Do not block the vent slots, this will cause the laminator to overheat.
THIS WARNING IS FOUND ON THE PRODUCT.
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
WARNING
m
c
This safety message means that you could be seriously hurt or killed if
you open the product and expose yourself to hazardous voltage.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS INSTRUCTION MANUAL.
THIS SYMBOL INDICATES A POTENTIAL PERSONAL
SAFETY HAZARD THAT COULD HURT YOU OR OTHERS,
AS WELL AS CAUSE PRODUCT DAMAGE OR PROPERTY
DAMAGE.
m
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT
TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
m
WARNING: FOR YOUR PROTECTION DO NOT CONNECT
THE POUCH LAMINATOR TO ELECTRICAL POWER UNTIL
YOU READ THESE INSTRUCTIONS COMPLETELY. KEEP
THESE INSTRUCTIONS IN A CONVENIENT LOCATION FOR
FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE
FOLLOWING BASIC SAFETY PRECAUTIONS MUST BE
OBSERVED IN THE SET-UP AND USE OF THIS PRODUCT.
m
Important safeguards
m
Caution: Unplug this product before cleaning.
Wipe exterior only with a damp cloth. Do not use detergents
or solvents.
Do not use aerosol dusters or cleaners
Do not spray anything into the product, foreign substances
can be explosive.
m
Cleaning
Specifications
GBC HeatSeal H425
230V / 50Hz / 3.5A / 750W
550 x 170 x 140mm
5.5kg
320mm
2 x 75 mic (Total 150) / 2 x 250 mic (Total 500)
1mm
3-5 minutes
400mm per minute
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
Minimum/Maximum Pouch Thickness
Maximum Thru-put Thickness
Warm-Up Time (2 x 75 mic)
Speed
Lataa käyttöohje suomalainen (PDF, 2.43 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi GBC HeatSeal H425 Pinnoituskone arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen GBC HeatSeal H425 Pinnoituskone?
Kyllä Ei
25%
75%
4 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi GBC HeatSeal H425 Pinnoituskone:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

mc 11-01-2022
Paperi on juuttunut, mitä minun pitäisi tehdä?

vastaa | Tästä oli apual (6) (Googlen kääntämä)
Pia 20-09-2022
Hei..mitä teen kun kalvo jäi sisälle, pyörähti rullan ympäri?

vastaa | Tästä oli apual (4)
anne 04-05-2023
Filmi on jumissa, mitä tehdä? En näe vastausta edellisiin kysymyksiin KIITOS

vastaa | Tästä oli apual (1) (Googlen kääntämä)
Hansa-Gymnasium Köln 04-07-2019
Laitteemme näyttää virheilmoituksen E4, mitä se tarkoittaa?

vastaa | Tästä oli apual (0) (Googlen kääntämä)

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi GBC HeatSeal H425 Pinnoituskone. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen GBC. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen GBC HeatSeal H425 Pinnoituskone käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki GBC
Malli HeatSeal H425
Kategoria Pinnoituskoneet
Tiedostotyyppi PDF
Tiedoston koko 2.43 MB

Kaikki käsikirjat kohteelle GBC Pinnoituskoneet
Lisää Pinnoituskoneet käsikirjoja

Käyttöohje GBC HeatSeal H425 Pinnoituskone

Liittyvät tuotteet

Aiheeseen liittyvät luokat

×
Download