4
General safeguards
• Use the unit only for its intended purposes of laminating documents.
• Do not place anything in the throat opening of the laminator other than
pouches/documents.
• Place unit on a secure, stable work area to prevent the unit from
falling and possibly causing personal injury and damage to the unit.
• Follow all warnings and instructions.
• The socket outlet shall be installed near the equipment and shall be
easily accessible.
• Do not attempt single side lamination, this will destroy the laminator.
• Do not block the vent slots, this will cause the laminator to overheat.
Electrical safeguards
• The unit must be connected to a supply voltage corresponding to the
electrical rating shown on the unit.
• Unplug the unit before moving it, or when it is not in use for an
extended period of time.
• Do not operate with a damaged supply cord or plug. Do not alter the
attachment plug. The plug is configured for the appropriate electrical
supply.
• Do not overload electrical outlets beyond their capacity; fire or
electrical shock could result.
• The unit is intended for indoor use only.
• Never push objects through the cabinet slots. Do not spill liquid of any
kind on this product.
• Close supervision is required when this product is used near children.
Technical specifications
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
Maximum Pouch Thickness
Maximum Thru-Put Thickness
Warm Up Time (2x75mic)
Ready Time Cold
Speed
GBC H220 HighSpeed
220-240VAC 1.74A
50Hz 400W (Watt)
380mm x 130mm x 105mm
1600 g
220mm
2x125mic (250 Total)
1.0mm
5 mins
Instant
400 mm/min
GBC H318 HighSpeed
220-240VAC 1.74A
50Hz 400W (Watt)
480mm x 130mm x 105mm
2150 g
317mm
2x125mic (250 Total)
1.0mm
5 mins
Instant
500mm/min
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT
TO ACCO
®
BRANDS. IN THIS INSTRUCTION MANUAL AND ON THE
PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSGES CAREFULLY.
m
The following warning is found on The producT.
Electrical shock hazard.
Do not open. No user
servicable parts inside.
Refer servicing to qualified
service personnel.
WARNING
m
c
This safety message means that you could be seriously hurt or killed if
you open the product and expose yourself to hazardous voltage.
The safeTY alerT sYMBol precedes each safeTY
Message in This insTrucTion Manual.
This sYMBol indicaTes a poTenTial personal
safeTY haZard ThaT could hurT You or oThers,
as well as cause producT daMage or properTY
daMage.
m
warning: for Your proTecTion, do noT connecT
The pouch laMinaTor To elecTrical power unTil
You read These insTrucTions coMpleTelY. Keep
These insTrucTions in a conVenienT locaTion for
fuTure reference. To guard againsT inJurY, The
following Basic safeTY precauTions MusT Be
oBserVed in The seT-up and use of This producT.
m
Important safeguards
m
Service
Do not attempt to service or repair the pouch laminator yourself. Unplug
the unit and contact an authorised GBC
®
service representative for any
required repairs.
Keskustele tuotteesta
Täällä voit jakaa mielipiteesi GBC HeatSeal H220 Pinnoituskone:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.