Käyttöohje FERM GGM1004 Kuumaliimapistooli

Käyttöohje

3

EN



Always observe the safety instructions

and applicable regulations.

This glue gun (kit) has been especially designed

for glueing products such as wood, plastic, foam,

rubber, fabric, cardboard, tiles, ceramics, etc.

Quickly setting, the glue is perfect for repairing

carpets, bookbinding, fixing soles, etc. The glue is

waterproof and resistant to the action of many

liquids. The glue gun is quick, environmentally-

friendly, energy-saving and together with the glue

facilitates and quickens any job.



• The normal setting time of the hot glue is 30

seconds. After 30 seconds the glue starts to set.

Having applied the glue on the relevant surfaces,

wait 15 - 20 seconds before joining them.

• After about 1 minute the joint has reached

90% of its adhesive strength.

• The setting time can be extended to 50 to 60

seconds by applying the glue in thick drops or

shortened by applying the glue in short, fine lines.

• Joining large surfaces is difficult, as the glue

tends to set before the entire surface has been

covered with glue.

• Preheating the surfaces to be joined

guarantees a strong joint. Sun rays have the

same impact.

• The glue melts from a temperature of approx.

140°C and must never be used on material

that is sensitive to heat.

• The glue gun can be used to replace nails,

paper tape, liquid glue, but not for heavy-duty

jobs.

• The electric glue gun features accurate

temperature control. It is fitted with a special

design feed system that ensures no glue is left

behind inside the mechanism.

• The glue gun requires Ø 11.2 mm glue

cartridges.

• The glue gun comes standard with a bracket

that enables you to put the gun safely on the

table when it is not used.



• Plug in the tool.

• Insert a glue cartridge into the gun, two when

using it for the first time.

• Wait 3-5 minutes for the glue to heat.

• Squeeze the trigger to release the glue.

• Replace the glue cartridge as soon as you

notice little if any glue is released from the gun.

• Disconnect the tool if you do not intend to use

it for some time.



Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate over

a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Always disconnect the tool before

cleaning and maintenance work. Never

use inflammable liquids to clean the tool.

Use a brush to clean the glue gun.

• Keep the nozzle clean. Check before every

use there is no glue left on the nozzle.

• Remove any glue left inside the nozzle with a

pin.



Should the machine fail to function correctly, a

number of possible causes and the appropriate

solutions are given below:

 

• Interruption in mains connection.

• Check cord and/or plug.

• The glue cartridge is empty.

• Replace the glue cartridge.

• Defective switch.

• Please contact the service address on the

warranty card.

Repairs and servicing should only be

carried out by a qualified technician or

service firm.



Regularly clean the device’s casing with a soft

cloth, preferably after each use. Keep the fan slits

free of dust and dirt. Remove stubborn dirt using a

soft cloth, dampened with soapy water. Do not use

solvents such as benzene, alcohol, ammonia, etc,

which might damage the plastic parts.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi FERM GGM1004 Kuumaliimapistooli. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen FERM. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen FERM GGM1004 Kuumaliimapistooli käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle FERM Kuumaliimapistoolit
Lisää Kuumaliimapistoolit käsikirjoja

Usein kysytyt kysymykset kohteesta FERM GGM1004 Kuumaliimapistooli

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

FERM GGM1002 Kuumaliimapistooli

Käyttöohje

FERM GGM1001 Kuumaliimapistooli

Käyttöohje

Bosch PKP 18 E Kuumaliimapistooli

Käyttöohje

Bosch GKP 200 CE Kuumaliimapistooli

Käyttöohje

Steinel Gluematic 5000 Kuumaliimapistooli

Käyttöohje

Parkside IAN 359513 Kuumaliimapistooli

Käyttöohje

Einhell TC-GG 30 Kuumaliimapistooli

Käyttöohje

Trotec PGGS 10‑230V Kuumaliimapistooli

Aiheeseen liittyvät luokat