Käyttöohje FERM CRM1001 FCL-700 Kompressori

Käyttöohje

38 Ferm

FCL-700 COMPRESSOR

THE NUMBERS IN THE FOLLOWING TEXT COR-

RESPOND WITH THE PICTURES AT PAGE 2

TECHNICAL SPECIFICATIONS

This is a V-Belt driven 2-cylinder compressor in mobile

design. This compressor is also equipped with a reducing

valve, a automatic shutdown and a quick coupling.

SAFETY INSTRUCTIONS

The following pictograms are used in these instructions

for use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

ADDITIONAL SAFETY INSTRUCTIONS

• The air compressor must be used in a suitable envi-

ronment (good ventilation - within ambient tempera-

ture +5°C - +40°C). The area in which the compres-

sor is operated must be free from dust, acids, vapour,

explosive gas, flammable or unstable materials.

• To obtain sufficient ventilation and cooling the dis-

tance between the shield and the wall needs to be at

least 50 to 60 cm.

• Do not leave the machine outside where it can be

affected by the weather.

• Keep a safety distance between the compressor and

the working area specially in using paints or liquids

goods. External possible colourings of the compres-

sor show enough distance.

• Do not weld or make any modifications whatsoever

to the tank. If you find some defects, air leak or corro-

sion the unit must be returned to the Service Centres

for a replacement to be fitted.

• Never aim compressed air towards people or

towards your body and remember that the use of

protective glasses 'is necessary for protecting the

eyes from dust and other particles moved by com-

pressed air

• The use of compressed air in its applications (tyre

inflation, pneumatic tools, spray painting, washing,

detergent washing etc.) must comply with the rele-

vant regulations for the individual cases guaranteeing

the minimum distance of 6 meters between the wor-

king area and the compressor.

• Compressed air from a compressor cannot be used

for pharmaceutical, food or health uses without furt-

her treatment.

• Do not use the compressed air to fill the cylinders for

breathing/diving apparatus.

THE FOLLOWING POINTS NEED TO BE

CHECKED:

• Do the voltage of the engine and the engine safe

guard, if any, correspond to the mains voltage;

• An earthed mains connection (wall socket) needs to

be used;

• Are the mains lead and the mains plug in a good condi-

tion: solid, without any loose ends or damage;

• The pressure reducing valve may not be completely

closed so as to prevent damage to membranes;

• The oil level with help from the gauge. The oil level

should be within the area indicated by both marks on

the gauge, when the compressor is placed level.

• Before use the air tank needs to be empty.

To prevent damage to the motor windings as a

result of voltage variation it is advisable to mount an

engine safety switch.

IMMEDIATELY SWITCH OFF THE COMPRES-

SOR IN CASE OF:

• Defective mains plug, mains line or damage to the

mains line;

• Defective switch;

• Smoke or bad smell caused by scorched insulation.

ELECTRICAL SAFETY

Always check that the power supply corresponds to the

voltage on the rating plate.

Replacing cables or plugs

Immediately throw away old cables or plugs when they

have been replaced by new ones. It is dangerous to insert

the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the

power input of the machine. The minimum conductor

size is 1,5 mm2. When using a cable reel always unwind

the reel completely.

Voltage | 230 V

Frequency | 50 Hz

Power input | 1500 W

No load speed | 2800/min.

Pumpcapacity | 244 l/min.

Weight | 62 kg.

Lpa (sound pressure) | 77 dB(A)

UK

English

Ferm 3

SPARE PARTS LIST

REF.NR. DESCRIPTION FERM NR.

MOTOR, 2250W - 400V 206003

RILSAN TUBE 4/6 208249

PACKING SET 208231

3 AIR FILTER 9COMPLETE0 208232

6 CYLINDER HEAD 208233

8 CONNECTION PRESS TUBE 208234

9 PACKING 208390

10 CYLINDER HEAD PACKING 208236

11 VALVE PLATE PACKING 208237

12 CYLINDER PACKING 208238

13 PACKING 208239

14 PACKING 208240

15 VALVE PLATE 208241

16 OIL LEVEL 208242

27 CONNECTION ROD 208243

28 PISTON 208244

29 PISTON PIN 208245

31 PISTON RING SET 208246

34 CRANK SHAFT 208247

38 FLY WHEEL 208248

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi FERM CRM1001 FCL-700 Kompressori. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen FERM. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen FERM CRM1001 FCL-700 Kompressori käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle FERM Kompressorit
Lisää Kompressorit käsikirjoja

Liittyvät tuotteet

Käyttöohje

FERM CRM1008 FC 730 Kompressori

Käyttöohje

FERM CRM1027 FCO-1524 Kompressori

Käyttöohje

FERM CRM1030 FCO-2050 Kompressori

Käyttöohje

FERM CRM1004 FC-700 Kompressori

Käyttöohje

FERM CRM1031 FCO-1008 Kompressori

Käyttöohje

FERM CRM1026 FCO-2050 Kompressori

Käyttöohje

FERM CRM1029 FCO-1524 Kompressori

Käyttöohje

FERM CRM1002 FC-720 Kompressori

Aiheeseen liittyvät luokat