Käyttöohje Fellowes Quasar-E 500 Nitoja

Käyttöohje

5

CORRECTING A BOUND DOCUMENT

REMOVAL OF WASTE CLIPPINGS

WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship

for 2 years from the date of purchase by the original consumer. If any part is found to be

defective during warranty period, your sale and exclusive remedy will be repair or replacement,

at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of

abuse, mishandling or unauthorised repair. Any implied warranty, including that of merchant-

ability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty

period set forth above. In no event shall Fellowes be liable for any consequential damages

attributable to this product. This warranty gives you specific legal rights. You may have other

legal rights that vary from this warranty. The duration, terms and conditions of this warranty are

valid worldwide, except where different limitations, restrictions or conditions may be required by

local law. For more details or to obtain services under this warranty, please contact Fellowes or

your dealer.

TROUBLESHOOTING

Problem

No Green power neon

Red standby neon

Punched holes are not central

Machine will not punch

Punch holes are not parallel to edge.

Partial holes

Damaged hole edges

Waste tray leaks

Cause

Machine is not switched on

Machine is overloaded when punching

Edge guide not set

Blockage

Debris is stuck below dies.

Sheets not correctly aligned to punch pattern.

Possibly overloading the machine

Waste tray is not correctly inserted or ‘burst

feature’ has activated

Solution

Switch on machine at rear next to plug inlet and at the socket.

Press the punch button. The machine will withdraw the punches

and re-set itself. Continue this process until the punch cycle is

complete

Adjust edge guide until hole pattern is correct

Check waste tray is empty. Check for blockage to paper entry.

Take stiff cardboard and slide into the paper entry. Move the

cardboard sideways to release any stray clippings into the

waste tray.

Adjust edge guide and test punch scrap sheets until correct

Punch plastic covers with paper sheets. Reduce number of

sheets being punched.

Check waste tray is empty and ‘burst feature’ is closed.

Additional sheets may be include or removed at any time by opening and then closing the comb as previously described.

The waste tray is located under the machine and is accessed from the right side. For best results empty the tray regularly.

STORAGE

Switch off the machine. Lower the lid. The Quasar-E comb binder is designed to be stored horizontally on the desk.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Fellowes Quasar-E 500 Nitoja. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Fellowes. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Fellowes Quasar-E 500 Nitoja käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Fellowes Nitojat
Lisää Nitojat käsikirjoja

Liittyvät tuotteet

Käyttöohje

Fellowes Pulsar-E 300 Nitoja

Käyttöohje

Fellowes Galaxy Wire Nitoja

Käyttöohje

Fellowes Helios 60 Thermal Nitoja

Käyttöohje

Fellowes Quasar 500 Nitoja

Käyttöohje

Fellowes Galaxy 500 Nitoja

Käyttöohje

Fellowes Starlet 90 Nitoja

Käyttöohje

Fellowes Galaxy-E 500 Nitoja

Käyttöohje

Fellowes Quasar Wire Nitoja

Aiheeseen liittyvät luokat