Käyttöohje Duracraft DF-130E Lämmitin

Käyttöohje

4

4 5

OVERHEATING SHUTOFF FOR THE FAN HEATER

1. The fan heater is equipped with overheating shut-off which

switches the fan heater off automatically if the temperature

inside the appliance exceeds the normal running temperature.

This protective device applies only to the appliance itself and

has no influence on room temperature regulation.

2. Turn the power switch

(3) to ( ) and the thermostat switch

(2) to the lowest position ( ). Pull the power cord out of the

socket.

3. Allow the fan heater to cool for at least 20 minutes.

CLEANING

1. Before starting to clean the appliance, turn the thermostat

switch (2) to the lowest position (

) and pull the power plug

out of the socket. Allow the fan heater to cool for at least 20

minutes.

2. Clean the air intake vent (1) and air outlet vent (6) with a

vacuum cleaner to remove the dust from the motor and

heating element.

3. Clean the outside of the fan heater with a soft, damp cloth.

DISPOSAL

This symbol on the product or its packaging indicates

that the appliance cannot be treated as normal

domestic trash, but must be handed in at a collection

point for recycling electric and electronic appliances.

Your contribution to the correct disposal of this product protects

the environment and the health of your fellow men. Health and the

environment are endangered by incorrect disposal.

Further information about the recycling of this product can be

obtained from your local town hall, your refuse collection service,

or in the store at which you bought the product.

This regulation is valid only in EU member states.

CONDITION OF PURCHASE

As condition of purchase the purchaser assumes responsibility for

the correct use and care of this KAZ product according to these user

instructions. The purchaser or user must himself or herself decide

when and for how long this KAZ product is in use.

WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRODUCT,

PLEASE OBSERVE THE INSTRUCTIONS IN THE GUARANTEE

CONDITIONS. DO NOT ATTEMPT TO OPEN OR REPAIR THE KAZ

PRODUCT YOURSELF, AS THIS COULD LEAD TO TERMINATION

OF THE GUARANTEE AND CAUSE DAMAGE TO PERSONS AND

PROPERTY.

Technical modifications reserved

DF130E

220~240V 50HZ

1750~2000W

IMPORTANT SAFETY INSTRUCTIONS

1. Before using this appliance, read through all the instructions

and only use accordingly.

2. This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities,

or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the

appliance.

3. The appliance is intended only for use indoors, not for outdoor

use or commercial use.

4. Do not use the appliance anywhere near easily flammable

gases or substances such as solvents, lacquers, glues, etc. Some

of the internal parts can be hot and could throw sparks.

5. Do not position the appliance immediately below a power

socket.

6. Keep flammable materials at least 100cm away from the

heater. To prevent burns, do not allow bare skin to come in

contact with hot surfaces.

7.

Do not cover the appliance with anything, as indicated

by the symbol . This can lead to overheating, fire or electric

shocks. Ensure that the air intake and outlet vents are not

obstructed.

8. Do not use this appliance or the power cord if it is damaged

or shows signs of damage, if it has fallen over, or does

not function properly. Repairs must be carried out by

manufacturer-approved service centres.

9. The air outlet grille can become very hot during operation

- please do not touch with bare hands.

10. Never touch the unit with wet hands.

11. Ensure that the unit is not accessible from the shower or

bathtub.

COMPONENTS

1. Air outlet vent

2. Thermostat switch

3. Setting Switch

A (

) off

B (

) cold air

C (

) 1000 W

D (

) 2000 W

4. Pilot light

5. Transport handle

6. Air intake vent

7. Power cord

INSTRUCTIONS FOR USE

1. Turn the power switch (3) to ( )

2. Turn the thermostat switch (2) in a clockwise direction to the

highest position (

).

3. When the desired room temperature has been reached, turn

the thermostat switch (2) in an anti-clockwise direction until

you hear it “click”. Now the fan heater is switched off.

4. Turn the thermostat switch

(2) again slightly in a clockwise

direction. Now the fan heater will switch on and off

automatically to maintain the desired room temperature.

ENGLISH ENGLISH

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Duracraft DF-130E Lämmitin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Duracraft. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Duracraft DF-130E Lämmitin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Duracraft Lämmittimet
Lisää Lämmittimet käsikirjoja

Usein kysytyt kysymykset kohteesta Duracraft DF-130E Lämmitin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Duracraft DW-210E Lämmitin

Käyttöohje

Mesko MS 7741b Lämmitin

Käyttöohje

Anslut 015-182 Lämmitin

Käyttöohje

Adax VV 13 T Lämmitin

Käyttöohje

Ferguson TKH-170 Lämmitin

Käyttöohje

SHX SHX49HEAT2022 Lämmitin

Käyttöohje

Ferguson TKH-190 Lämmitin

Käyttöohje

Point POLISW1000 Lämmitin

Aiheeseen liittyvät luokat