Käyttöohje Cotech WS4T-37 Puunhalkaisukone

Tarvitsetko käyttöoppaan Cotech WS4T-37 Puunhalkaisukone? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 3 usein kysyttyä kysymystä, 1 kommentti ja 2 ääniä, joiden keskimääräinen tuotearvio on 100/100. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

4
ENGLISH
14. Keep thetools in working order.
Ensure that they are clean and that thecutting edges are sharp for anoptimal and safe result. Follow
therecommendations in themanual regarding lubrication and change of fittings. Check thepower cable
regularly. If it is damaged it should be changed by aqualified service technician. Check all extension cables
regularly to ensure that they are not damaged. Ensure that thehandles and controls of themachinery/tools
are dry, clean and completely free from oil, grease etc.
15. Switch thepower off.
Pull out theplug and press theemergency stop button before servicing and when changing fittings such as
planer tools, drill bits, knives, abrasive belts or blades.
16. Remove all spanners and service tools.
Make ahabit of checking that all spanners and service tools are removed from themachinery before
switching on thepower.
17. Avoid starting unintentionally.
Do not carry atool with your finger on theswitch if thecable is plugged into asocket. Ensure that theswitch
is in theoff position when connecting theplug.
18. Use thecorrect extension cables.
When using extension cables outdoors, only use those which are intended for outdoor use. Use extension
cables with asufficient conductivity. Uncoil theentire cable!
19. Use common sense and be careful.
Think twice before carrying out aworking operation so that you can carry it out in asafe manner!
Do not use themachinery/tool when you are tired, under theinfluence of medication etc.
20. Ensure that all parts are intact.
Before starting themachinery check: that all safety guards and other parts are intact and serve their
purpose, that all moving parts can rotate freely and are correctly aligned, that no moving parts can get
caught, that no defects have arisen and that no other circumstances can affect thework. A safety guard or
other part that has been damaged must be repaired by anexpert or changed. Damaged power cables and
switches must always be changed by anexpert. Never use thetool if you cannot switch it off or start it in
a safe manner.
21. Use recommended fittings.
Using fittings that have not been recommended may cause accidents and personal injury.
22. Must be repaired by aqualified technician.
The machinery conforms to current safety requirements. Repairs on themachinery must always be carried
out by anexpert using genuine replacement parts. Otherwise thetool may cause accidents or personal
injury.
23. Electrical tools should be connected to themains via anearth fault breaker for personal safety.
The product must not be altered or used for working operations for which it is not designed! Check
regularly that all screws and nuts are properly tightened.
Lataa käyttöohje suomalainen (PDF, 0.68 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Cotech WS4T-37 Puunhalkaisukone arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Cotech WS4T-37 Puunhalkaisukone?
Kyllä Ei
100%
0%
2 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Cotech WS4T-37 Puunhalkaisukone:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Dag 12-05-2022
Hei. Kokemuksia, että painelevy ei palaa kokonaan halkeamisen jälkeen ja että kuuluu narisevaa ääntä vähän ennen kuin se lakkaa. Mistä tämä voisi johtua? Muuten toimii niinkuin pitääkin.

vastaa | Tästä oli apual (0) (Googlen kääntämä)

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Cotech WS4T-37 Puunhalkaisukone. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Cotech. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Cotech WS4T-37 Puunhalkaisukone käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Cotech
Malli WS4T-37
Kategoria Puunhalkaisukoneet
Tiedostotyyppi PDF
Tiedoston koko 0.68 MB

Kaikki käsikirjat kohteelle Cotech Puunhalkaisukoneet
Lisää Puunhalkaisukoneet käsikirjoja

Usein kysytyt kysymykset kohteesta Cotech WS4T-37 Puunhalkaisukone

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Kuinka monta tonnia voimaa puunjakajani tarvitsee? Todennettu

Kevyeen henkilökohtaiseen käyttöön oman polttopuun tekeminen riittää 22 tai 27 tonnia voimaa. Raskaassa henkilökohtaisessa käytössä on suositeltavaa käyttää 25 tonnia. Teolliseen käyttöön suositellaan vähintään 40 tonnia.

Tästä oli apual (114) Lue lisää

Tarvitseeko puunjakaja teroitus? Todennettu

Puun normaalikäytössä ei tarvitse teroittaa puun halkaisijaa.

Tästä oli apual (92) Lue lisää

Mitä eroa on vaakasuoralla ja pystysuoralla puunhakkurilla? Todennettu

Vaakasuuntaisilla hakkurilla on yleensä vähemmän tehoa ja ne pystyvät käsittelemään vain ohuempia tukkeja. Pystysuorat mallit voivat viedä laajempia tukkeja ja niillä on enemmän tehoa.

Tästä oli apual (85) Lue lisää
Käyttöohje Cotech WS4T-37 Puunhalkaisukone

Liittyvät tuotteet

Aiheeseen liittyvät luokat