Käyttöohje Cotech LSG2503 Oksasilppuri

Käyttöohje

4

ENGLISH

• The machine may only be used for thepurposes outlined in this instruction manual.

• Check theappropriateness of thematerial being shredded before using themachine.

Removeany foreign objects. Beaware of any foreign objects during thetime of use.

Ifyou still manage to accidently insert aforeign object, make sure that you turn off

themachine immediately. Thencarefully remove theforeign object.

• Work only when there is adequate daylight or lighting.

• Make sure that you are standing steady and well balanced when using themachine.

• Always keep aneye on themachine. Ifyou need to stop working, turn off

themachine, unplug it, and store it in asafe place. Ifyou need to stop work and

change locations you must turn off themachine before moving it.

• Never use themachine in rain or in amoist or damp environment. Protect themachine

from rain or moisture.

• Turn off themotor and remove thepower lead when: not using themachine,

when themachine is not being attended, when themachine is being checked,

if thelead or theblades are damaged, or if themachine needs to be moved to

another location.

• Make sure that there is adequate distance between themachine and bystanders.

Keepaclose eye on children and pets within themachine’s danger zone.

• Make sure that theventilation openings are unobstructed from leaves and debris.

• Unplug themachine after each use and check for any possible damage before storing.

• When not using themachine for anextended period ensure that themachine is

stored in adry location out of thereach of children.

• Only use themachine as described in this instruction manual.

• Regularly check that all screws are adequately tightened.

• Voltage from themains must correspond to themachine’s rating plate.

• The power point used must be protected with at least a10A slow blow fuse.

• Any extension cables used must be suitable for outdoor use and have at least

aH07RN-F rating and aminimal conductor cross sectional area of 3G1.5 mm².

Plugsmust be earthed and thesockets must be splash-proof. Checkthepower

lead regularly for damage and wear. Themachine can only be use if thepower

lead is suitable for use.

• If theextension lead has areduced conductor cross sectional area themachines

performance will be reduced considerably. Forleads under 25 m in length

a3G1.5 mm² minimum conductor cross sectional area is required, if over 25 m

a3G2.5 mm² area is required.

• Never move themachine by pulling on thelead.

• If theshredder vibrates extremely abnormal, turn off themachine immediately,

pull out theplug and find thecause of theproblem. Strongvibrations are often

anindication of aproblem.

• Repairs should only be carried out by aqualified service technician.

• Before operating themachine and every time it has been exposed to shocks or impact

it should also be checked for damage or wear. Leaveit in for repairs when necessary.

• Use only spare parts and accessories that are intended for themachine or have

been recommended by themanufacturer.

• Note: Therotary blades continue to rotate afew seconds after turning off the machine.

• The garden shredder should only be connected to anearthed wall socket.

Connect it via aRCD for personal safety.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Cotech LSG2503 Oksasilppuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Cotech. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Cotech LSG2503 Oksasilppuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Cotech Oksasilppurit
Lisää Oksasilppurit käsikirjoja

Usein kysytyt kysymykset kohteesta Cotech LSG2503 Oksasilppuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Cocraft HS 2800N Oksasilppuri

Käyttöohje

Black and Decker GS1800 Oksasilppuri

Käyttöohje

Stihl GHE 260 Oksasilppuri

Käyttöohje

Bosch AXT 2500 HP Oksasilppuri

Käyttöohje

Einhell GH-KS 2440 Oksasilppuri

Käyttöohje

Atika AMA 2300 Oksasilppuri

Käyttöohje

Atika LHF 2300 Oksasilppuri

Käyttöohje

Viking GE 365 Oksasilppuri

Aiheeseen liittyvät luokat