Käyttöohje Clas Ohlson TGE-32A Termostaatti

Käyttöohje

English

ON/OFFCD

SET

R

CYCLE

1

3

5

6

8

7

9

2

4

OFF

AUTO

22

ROOM

TEMP

START

TEMP

c

5

20

c

0

22

SET

ROOM

TEMP

START

TEMP

c

5

18

c

0

SET

STOP

22

ROOM

TEMP

TEMP

c

5

24

c

0

AUTO

22

18

ROOM

TEMP

START

TEMP

c

5

c

0

Lorem ipsum

22

SET

ROOM

TEMP

START

TEMP

c

5

20

c

0

SET

STOP

22

ROOM

TEMP

TEMP

c

5

c

0

16

ROOM

TEMP

SET DELEY

Min

22

c

5

4

AUTO

22

20

ROOM

TEMP

START

TEMP

c

5

c

0

Lorem ipsum

ROOM

TEMP

SET

CD

Min

22

c

5

15

ROOM

TEMP

SET

Min

22

c

5

45

CYCLE ON

ROOM

TEMP

SET

Hr

22

c

5

4

CYCLE

OFF

Ver. 20230914

Plug-in thermostat

Art. no. 36-9325 Model TGE-32A

Please read the entire instruction manual before using the product and

then keep it for future reference. We accept no liability for any errors

in the text or images and we reserve the right to make any necessary

changes to technical data. If you have technical problems or other

queries, please contact our customer service team.

Safety

• This product is intended for indoor use only.

• Never expose the product to high temperatures, powerful vibration,

impacts or damp or wet conditions.

• Make sure that the wall socket is easily accessible in case

the product and any devices connected to it need to be

unplugged quickly from the mains.

• Do not connect several products of this type together.

• Do not cover the product.

• Never attempt to open, repair, dismantle

or repair the product in any way.

Buttons and functions

Returning to the factory settings (Reset)

2. Set the temperature for the fan to

switch off (Stop temp).

Button lock

1. Hold [ + ] and [ – ] simultaneously to lock the buttons.

“ ” appears on the display.

2. Press and hold both buttons to unlock all the buttons.

Troubleshooting guide

The connected heater/

air conditioner/fan

does not turn on.

• Is there a power supply to the wall

socket?

• Is the thermostat properly connected to

the wall socket?

• Check that the heater/air conditioner/

fan is switched on and functioning

correctly. Try plugging the heater/air

conditioner/fan into another wall socket

without the thermostat to make sure

that it works.

• Check that the mains lead of

the heater/air conditioner/fan is

undamaged and securely connected to

the thermostat.

The display is difficult

to read or blank.

• The built-in battery of the thermostat

needs to be charged. Plug the

thermostat into a wall socket for

2 hours to charge the battery.

The thermostat

operates abnormally in

some other way.

• Charge the battery and reset the

thermostat to its factory default settings

by carefully pressing the reset button (7).

The display shows

E1 or E2.

• The room temperature is outside

the measuring range of the sensor.

(-20°C to +60°C).

• Defective temperature sensor.

Contact the Clas Ohlson customer

service team.

Responsible disposal

This symbol indicates that the product should not be

disposed of with general household waste. This applies

throughout the entire EU. In order to prevent any harm to

the environment or health hazards caused by incorrect

waste disposal, the product must be handed in for

recycling so that the material can be disposed of in a

responsible manner. To recycle the product, take it to your

local recycling facility or contact the retailer. They will ensure that the

product is disposed of in a way that does not harm the environment.

Specifications

Rated voltage 230 V AC, 50 Hz

Temperature control range 0–40°C

Min. temperature adjustment ± 0.5°C

Maximum power supply

to connected devices 3600 W, 16(2) A

Built-in baery backup me >100 hours

1. Display

2. [ SET ] Hold to enter

programming mode.

Press to confirm

the settings.

3. [ + ] Increase value

4. LED indicator. Lights

when the device is in

on mode (ON).

5. [ CD ] Countdown

6. [ – ] Decrease value

7. [ R ] Reset button

8. [ CYCLE ] Recurring on

and off times.

9. [ ON/OFF ] Press

repeatedly to choose

between AUTO

(program), ON (always

on) or OFF (always off).

Using the product

The thermostat can be used either to switch on a heater when the

temperature in the room drops below a preset limit or to switch on an

air conditioner or a fan when the temperature exceeds a preset limit.

Charging the backup battery

Plug the thermostat into a wall socket and leave it for a couple of

hours to charge the built-in battery. When the battery is charged, the

thermostat can be disconnected from the wall socket to make it easier

to change the settings. The battery also ensures that the settings are

saved in the event of a power cut.

Use a pointed object like a pencil,

for example, to press the Reset

button (7) to clear the memory

and return to the factory settings.

The display will then show the

current room temperature

(“ROOM TEMP”) and that the

device is in off mode (“OFF”).

On/Off/Auto

Press [ ON/OFF ] repeatedly to switch between:

1. On: The device is always on.

2. O: The device is always off.

3. Auto: Depending on the program you have selected,

the device is switched on or off on the basis of:

- Preset start and stop temperatures

- The countdown setting (CD)

- Recurring on and off times (CYCLE)

Setting the start and stop temperatures

The thermostat goes into a different mode depending on how

the thresholds are set.

- Heang mode “ “ if the start temperature is set lower than

the stop temperature.

- Cooling mode “ “ if the start temperature is set higher than

the stop temperature.

(Depending on which mode the thermostat finishes in,

the settings may differ.)

• Hold [ SET ] for 2 seconds to go to programming mode.

(“SET” will start to flash).

• Press [ + ] or [ – ] to change the temperature/value.

• Confirm a set value by pressing [ SET ].

Example 1: Programming a heater to come on at 18°C and switch o

when the temperature reaches 24°C.

1. In programming mode, set the

temperature for the heater to

switch on. (Start temp)

2. Set the temperature for the heater to

switch off (Stop temp).

3. “ “ indicates that the thermostat

is in heating mode. “AUTO”

indicates that switching on and off

happens automatically.

Example 2: Programming a cooling fan to come on at 20°C and

switch o when the temperature reaches 16°C.

1. In programming mode, set

the temperature for the fan to

switch on. (Start temp)

3. If necessary, a countdown period

can be set for switching on. Select

between 0 and 10 minutes.

4. “ “ indicates that the thermostat

is in cooling mode. “AUTO”

indicates that switching on and off

happens automatically.

CD (Countdown):

Countdown. Set the period until the wall socket is switched off.

1. In Auto mode, press [ CD ] to go

to settings mode. “SET” will start

to flash.

2. Press [ + ] or [ – ] to set a time

between 1 minute and 24 hours.

Confirm by pressing [ CD ].

“CD” will flash on the display to indicate

that the countdown program is active.

CYCLE

Program for recurring on and off times.

1. In Auto mode, press [ CYCLE ] to go

to settings mode. “SET CYCLE ON”

will start to flash.

2. Press [ + ] or [ – ] and set how long

the device should be on (between

1 minute and 24 hours). Confirm by

pressing [ CD ]. “SET CYCLE OFF”

will start to flash.

3. Set how long the device should

be off (between 1 minute and 24

hours). Confirm by pressing [ CD ].

“CYCLE ON/OFF” will flash on the display to indicate that

the program is active.

Changing the temperature unit

Hold [ – ] for 3 seconds to switch between Celsius (°C) and Fahrenheit (°F).

Calibrating the temperature sensor

By comparing the temperature measured by the thermostat with a

thermometer you know is accurate, you can compensate for incorrect

readings by calibrating the sensor.

1. Hold [ + ] for 3 seconds until “CAL SET” appears on the display.

2. Press [ + ] or [ – ] to compensate for the error. Adjust the temperature

between -10.0 and +10.0°C. Press [ SET ] to confirm.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Clas Ohlson TGE-32A Termostaatti. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Clas Ohlson. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Clas Ohlson TGE-32A Termostaatti käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Clas Ohlson Termostaatit
Lisää Termostaatit käsikirjoja

Usein kysytyt kysymykset kohteesta Clas Ohlson TGE-32A Termostaatti

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Eberle RTR-E 3563 Termostaatti

Käyttöohje

Ensto ECO16LCD Termostaatti

Käyttöohje

Henco CU-REGK-230V Termostaatti

Käyttöohje

Glamox 62169 Termostaatti

Käyttöohje

Ebeco EB-Therm 205 Termostaatti

Käyttöohje

Eberle RTR-E 6731 Termostaatti

Käyttöohje

Henco CU-REGB-HC230V Termostaatti

Käyttöohje

Siemens REV34 Termostaatti

Aiheeseen liittyvät luokat