Käyttöohje Braun BP6000 ExactFit 3 Verenpainemittari

Käyttöohje

10

11

What to do if …..

Problem Reason Solution

Heart rate

symbol

Appears in the measurement

condition and ashes when

pulse is detected.

• Measurement in progress, remain quiet.

Low battery

indicator

Appears when the battery

voltage is excessively low or the

positions of the batteries are

incorrect.

• Replace all four batteries with new ones.

Insert the batteries in the correct

positions. Be aware of +/- positions.

Measuring

error

Appears when the accurate

blood pressure and pulse could

not be obtained.

• Press “start/stop” button again and

remeasure.

• Check if cu is wrapped according

to instructions.

• Check that there are no kinks in tube.

• Check palm if exerting eort.

• Check if talking or moving

during measurement.

• Check if posture is correct.

E1 shows The cu is not secure • Refasten the cu and then measure again.

E2 shows The cu is very tight • Refasten the cu and then measure again.

E3 shows Over-pressure • Relax for a moment and then measure again.

E4 shows The monitor detected motion

while measuring

• Movement can aect the measurement.

Relax for a moment and then measure again.

Eexx shows Measure incorrectly • Relax for a moment and then measure again.

• Retake the measurement. If the problem

persists, contact the retailer or our customer

service department for further assistance.

Refer to the warranty for contact information

and return instructions.

Erasing data

Press and hold memory button

M

(2) for more than 5 seconds,

LCD will blink display “dEL ALL”(if the “slide switch is in User A

side, the user A icon will show ”) or “dEL ALL”(if slide switch is in

User B side, the user B icon will show).

Press memory button

M

(2) again, LCD will display “---” to mean

all the stored data of corresponding user have been deleted.

Irregular heart beat detector (for BP6200 only)

The appearance of this symbol signies that a certain pulse irregularity was detected during the

measurement. Talking, moving, shaking or an irregular pulse during the measurement can result in the

appearance of this icon. Usually this is not a cause for concern, however if the symbol appears often,

we recommend you seek medical advice. The device does not replace a cardiac examination, but serve

to detect pulse irregularities at an early stage.

Low battery indicator

When the low battery indicator ashes on the display, it means the battery is low and the four

batteries need to be replaced with alkaline LR6 (AA) batteries.

** After replacing batteries, BPM will go into time-setting mode automatically and show the

last measurement time on screen. Please set the current date / time before taking the next

measurement to get correct average result.

Storage and cleaning

• Always keep the unit in the carrying case after its use.

• Do not put the item directly under the sunlight, in high temperature or humid and dusty places.

• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.

• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece of dry

cloth to wipe it dry. Use a piece of dry cloth to wipe the cu when it is dirty.

• Do not use any strong cleansers to clean it.

• When the unit is not to be used for a long time, remove the batteries.

(Batteries may leak or cause harm).

Calibration

This device was designed and manufactured for a long service life, however it is generally

recommended to have the device inspected once a year to ensure correct function and accuracy.

Please contact the authorised service centre located in your country. Note: The calibration checking

is not a free service. Please contact the Authorized Service Centre to get a quotation before you send

out the product.

This device is not intended as a substitute for regular check-ups by your doctor, please continue to

visit your doctor on a regular basis for a professional reading.

Production date is given by the LOT located in the back of the device. The rst 3 numeric digits

after the LOT No represents the day of the year of manufacture. The next 2 numeric digits represent

the last two numbers of the calendar year of manufacture and the letters at the end designate the

manufacturer of the product. E.g. LOT 15612VAL this product was made on the day 156, year 2012 at

manufacturer identier VAL.

A

A

P

MD

A

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Braun BP6000 ExactFit 3 Verenpainemittari. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Braun. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Braun BP6000 ExactFit 3 Verenpainemittari käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Braun Verenpainemittarit
Lisää Verenpainemittarit käsikirjoja

Usein kysytyt kysymykset kohteesta Braun BP6000 ExactFit 3 Verenpainemittari

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Braun BP6200 ExactFit 5 Verenpainemittari

Käyttöohje

Braun BP6100 ExactFit 3 Verenpainemittari

Käyttöohje

Braun BPW4300 VitalScan Verenpainemittari

Käyttöohje

Braun BPW4100 VitalScan Verenpainemittari

Käyttöohje

Camry CR 8409 Verenpainemittari

Käyttöohje

Topcom BPM WRIST 2300 Verenpainemittari

Käyttöohje

Medisana BU 512 Verenpainemittari

Käyttöohje

Medisana MTM Verenpainemittari

Aiheeseen liittyvät luokat