Käyttöohje Black and Decker XTC24BK Porakone-ruuvinväännin

Käyttöohje

5

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Battery tool use and care

a. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

b. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

c. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

d. When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys,

nails, screws, or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

e. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for batteries and chargers

Batteries

◆ Never attempt to open for any reason.

◆ Do not expose the battery to water.

◆ Do not store in locations where the temperature may

exceed 40 °C.

◆ Charge only at ambient temperatures between 4 °C and

40 °C.

◆ Charge only using the charger provided with the tool.

◆ When disposing of batteries, follow the instructions given

in the section “Protecting the environment”.

◆ Under extreme conditions, battery leakage may occur.

When you notice liquid on the battery, proceed as follows:

- Carefully wipe the liquid off using a cloth. Avoid skin

contact.

- In case of skin or eye contact, follow the instructions

below.

Warning! The battery fluid, a 25-30% solution of potassium

hydroxide, can be harmful. In case of skin contact, immediately

rinse with water. Neutralise with a mild acid such as lemon

juice or vinegar. In case of eye contact, rinse abundantly with

clean water for at least 10 minutes. Consult a physician.

◆ Do not incinerate the battery.

◆ Do not attempt to charge damaged batteries.

Chargers

◆ Use your Black & Decker charger only to charge the battery

in the tool with which it was supplied. Other batteries

could burst, causing personal injury and damage.

◆ Never attempt to charge non-rechargeable batteries.

◆ Have defective cords replaced immediately.

◆ Do not expose the charger to water.

◆ Do not open the charger.

◆ Do not probe the charger.

The charger is intended for indoor use only.

Electrical safety

Your charger is double insulated; therefore no earth

wire is required. Always check that the mains

voltage corresponds to the voltage on the rating

plate. Never attempt to replace the charger unit with

a regular mains plug.

Additional safety instructions for drill/screwdrivers

◆ Before drilling into walls, floors or ceilings, check for the

location of wiring and pipes.

◆ Avoid touching the tip of a drill bit just after drilling, as it

may be hot.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Forward/reverse slider

3. Mode selector / torque adjustment collar

4. Chuck

5. Two-gear selector

6. Battery charge indicator (XTC18BK)

7. Bit holder

8. Side handle

9. Battery

10. Battery release button

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker XTC24BK Porakone-ruuvinväännin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker XTC24BK Porakone-ruuvinväännin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Porakone-ruuvinvääntimet
Lisää Porakone-ruuvinvääntimet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker XTC24BK Porakone-ruuvinväännin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker BCD700S Porakone-ruuvinväännin

Käyttöohje

Black and Decker HP188F2K Porakone-ruuvinväännin

Käyttöohje

Black and Decker EPL7I Porakone-ruuvinväännin

Käyttöohje

Black and Decker XTC18BK Porakone-ruuvinväännin

Käyttöohje

Black and Decker KC2002F Porakone-ruuvinväännin

Käyttöohje

Black and Decker KC1251CN Porakone-ruuvinväännin

Käyttöohje

Black and Decker XTC143BK Porakone-ruuvinväännin

Käyttöohje

Black and Decker HP126F4BK Porakone-ruuvinväännin

Aiheeseen liittyvät luokat