Käyttöohje Black and Decker XTA90EK Epäkeskohiomakone

Käyttöohje

5

ENGLISH

Use of the power tool for operations different from those

intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

◆ Warning! Contact with or inhalation of dusts arising

from sanding applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the work area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Dust extraction outlet

5. Sanding disc

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the sanding disc (fig. A)

◆ Place the tool on a table, with the spindle facing up.

◆ Place the sanding disc (5) onto the spindle.

◆ Secure the sanding disc using the screws (6).

Fitting sanding sheets (fig. B)

Warning! Never use the tool without a sanding sheet or

accessory in place.

◆ Press the sheet firmly and evenly onto the sanding disc

(5), making sure that the holes in the sheet line up with

the holes in the base.

Fitting and removing the dustbag (fig. C)

◆ Fit the dustbag (7) over the dust extraction outlet (4).

◆ To remove the dustbag, pull it off the dust extraction

outlet.

Connecting a vacuum cleaner (fig. D)

◆ Insert the hose (8) of the vacuum cleaner into the dust

extraction outlet (4).

Use

Warning! Let the tool work at its own pace. Do not overload.

Variable speed control

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

◆ Set the control knob (3) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and

for removing paints.

Switching on and off

◆ To switch the tool on, press the on/off switch (1).

◆ For continuous operation, press the lock-on button (2) and

release the on/off switch.

◆ To switch the tool off, release the on/off switch. To

switch the tool off when in continuous operation, press

the on/off switch once more and release it.

Automatic brake system

This feature keeps the speed of the disc limited as long as the

tool does not touch the workpiece. As soon as the tool is

placed on the workpiece, the disc will reach its normal

operating speed.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

◆ Shake the dustbag to empty the contents.

Hints for optimum use (fig. E)

◆ Do not exert too much pressure on the tool.

◆ Regularly check the condition of the sanding sheet.

Replace when necessary.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker XTA90EK Epäkeskohiomakone. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker XTA90EK Epäkeskohiomakone käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Epäkeskohiomakoneet
Lisää Epäkeskohiomakoneet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker XTA90EK Epäkeskohiomakone

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker KA260GT Epäkeskohiomakone

Käyttöohje

Black and Decker KA198 Epäkeskohiomakone

Käyttöohje

Bosch GEX 150 AC Professional Epäkeskohiomakone

Käyttöohje

Bosch GEX 125 AVE Professional Epäkeskohiomakone

Käyttöohje

Bosch GEX 125 AC Professional Epäkeskohiomakone

Käyttöohje

FERM ESM1006 Epäkeskohiomakone

Käyttöohje

Bosch GET 55-125 Epäkeskohiomakone

Käyttöohje

AEG EX 125 E Epäkeskohiomakone

Aiheeseen liittyvät luokat