Käyttöohje Black and Decker VPX1201 Porakone-ruuvinväännin

Käyttöohje

4

ENGLISH

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tools

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

b. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

c. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

d. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

6. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will make sure that the safety of the power tool is

maintained.

Additional power tool safety warnings

X Hold power tool by insulated gripping surfaces

when performing an operation where the fastener

may contact hidden wiring or its own cord.

Fasteners contacting a "live" wire may make exposed

metal parts of the power tool "live" and shock the

operator.

X Wear ear protectors with impact wrenches.

Exposure to noise can cause hearing loss.

X Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

X Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

X Before driving fasteners into walls, floors or ceilings,

check for the location of wiring and pipes.

X This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety. Children should be

supervised to ensure that they do not play with the

appliance.

X The intended use is described in this instruction

manual. The use of any accessory or attachment or

performance of any operation with this tool other than

those recommended in this instruction manual may

present a risk of personal injury and/or damage to

property.

Vibration

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 60745 and may be used for comparing one

tool with another. The declared vibration emission value may

also be used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

Warning! Additional safety warnings for cordless

drills and screwdrivers.

!

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker VPX1201 Porakone-ruuvinväännin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker VPX1201 Porakone-ruuvinväännin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Porakone-ruuvinvääntimet
Lisää Porakone-ruuvinvääntimet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker VPX1201 Porakone-ruuvinväännin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker EGBL108 Porakone-ruuvinväännin

Käyttöohje

Black and Decker HP146F2K Porakone-ruuvinväännin

Käyttöohje

Black and Decker XTC243BK Porakone-ruuvinväännin

Käyttöohje

Black and Decker EPC148 Porakone-ruuvinväännin

Käyttöohje

Black and Decker EPC128 Porakone-ruuvinväännin

Käyttöohje

Black and Decker KC1261 Porakone-ruuvinväännin

Käyttöohje

Black and Decker BDCHD12S1 Porakone-ruuvinväännin

Käyttöohje

Black and Decker XTC183BK Porakone-ruuvinväännin

Aiheeseen liittyvät luokat