Käyttöohje Black and Decker KS999EK Kuviosaha

Käyttöohje

3

ENGLISH

Intended use

Your Black & Decker jigsaw has been designed for sawing

wood, plastics and sheet metal. This tool is intended for

consumer use only.

Safety instructions

◆ Warning! When using mains-powered tools, basic safety

precautions, including the following, should always be

followed to reduce the risk of fire, electric shock, personal

injury and material damage.

◆ Read all of this manual carefully before operating the tool.

◆ Retain this manual for future reference.

◆ Remove the plug from the socket before carrying out any

adjustment, servicing or maintenance.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool or mains cable.

Dress properly

Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear rubber gloves and

non-slip footwear when working outdoors. Wear protective

hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever

the operations may produce dust or flying particles.

Hearing protection should be worn.

Guard against electric shock

Prevent body contact with earthed or grounded surfaces

(e.g. pipes, radiators, cookers and refrigerators). Electric safety

can be further improved by using a high-sensitivity

(30 mA / 30 mS) residual current device (RCD).

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it

frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction

and collection facilities, ensure that these are connected and

properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed

from the tool before operating the tool.

Extension cables

Before use, inspect the extension cable and replace if damaged.

When using the tool outdoors, only use extension cables

intended for outdoor use. Up to 30 m of Black & Decker

extension cable can be used without loss of power.

Use appropriate tool

The intended use is described in this instruction manual.

Do not force small tools or attachments to do the job of a

heavy-duty tool. The tool will do the job better and safer at the

rate for which it was intended. Do not force the tool. Do not

use the tool for purposes not intended, for example, do not

use a circular saw to cut tree limbs or logs.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

Check for damaged parts

Before use, carefully check the tool and mains cable for

damage. Check for misalignment and seizure of moving parts,

breakage of parts, damage to guards and switches and any

other conditions that may affect its operation. Ensure that the

tool will operate properly and perform its intended function.

Do not use the tool if any part is damaged or defective. Do not

use the tool if the switch does not turn it on and off. Have any

damaged or defective parts repaired or replaced by an

authorised repair agent. Never attempt any repairs yourself.

Unplug the tool

Unplug the tool when it is not in use, before changing any

parts of the tool, accessories or attachments and before

servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch.

Be sure that the tool is switched off when plugging in.

Do not abuse cord

Never carry the tool by its cord or pull it to disconnect from the

socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools should be stored in a dry, locked up or

high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow the instructions for maintenance and

changing accessories. Keep handles and switches dry,

clean and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker KS999EK Kuviosaha. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker KS999EK Kuviosaha käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Kuviosahat
Lisää Kuviosahat käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker KS999EK Kuviosaha

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker KS634 Kuviosaha

Käyttöohje

Black and Decker KS635S Kuviosaha

Käyttöohje

Black and Decker KS850SW Kuviosaha

Käyttöohje

Black and Decker KS631 Kuviosaha

Käyttöohje

Black and Decker KS700PE Kuviosaha

Käyttöohje

Black and Decker KS655PE Kuviosaha

Käyttöohje

Black and Decker KS888E Kuviosaha

Käyttöohje

Black and Decker KS703PE Kuviosaha

Aiheeseen liittyvät luokat