Käyttöohje Black and Decker KS801SE Kuviosaha

Käyttöohje

6

ENGLISH

(Original instructions)

6

ENGLISH

(Original instructions)

Electrical safety

#

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply voltage corresponds to the voltage

on the rating plate.

 If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch (KS901PE) or On/Off switch

(KS801SE and KS901SE)

2. Lock-on button

3. Saw blade locking lever

4. Shoe plate

5. Dust extraction outlet

6. Pendulum stroke / AutoSelect dial

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped. Used saw blades may be hot.

Fitting the saw blade ( g. A)

 Hold the saw blade (7) as shown, with the teeth facing

forward.

 Push the locking lever (3) away from the shoe plate (4).

 Insert the shank of the saw blade into the blade holder (8)

as far as it will go.

 Release the locking lever (3).

Connecting a vacuum cleaner to the tool ( g. B)

 Slide the vacuum nozzle into the dust extration outlet (5).

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially

oak, beech and MDF.)

Use

Adjusting the shoe plate for bevel cuts ( g. C)

Warning! Never use the tool when the shoe plate is loose

or removed.

The shoe plate (4) can be set to a left or right bevel angle

of 22.5° or 45°.

 Loosen the screw (10).

 Pull the shoe (4) forward, rotate the shoe to the left

or right and push it back into the 22.5° or 45° location.

 Tighten the screw.

To reset the shoe plate (4) for 90° cuts:

 Loosen the screw (10).

 Pull the shoe (4) forward, rotate to the centre and push

it back into the 0° location.

 Tighten the screw.

Variable speed control

 Use a high speed for wood, medium speed for aluminium

and PVC and low speed for metals other than aluminium.

Switching on and off

 To switch the tool on, press the variable speed switch (1).

On KS901PE units the speed depends on how far you

depress the switch.

 For continuous operation, press the lock-on button (2) and

press the variable speed switch. This option is available

only at full speed.

 To switch the tool off, release the variable speed switch.

To switch the tool off, when in continuous operation, press

the variable speed switch once more and release it.

How to Use the Sightline® Feature ( g. D)

 Use a pencil to mark the cutting line.

 Position the jig saw over the line (11).

Viewing from directly above the jig saw, the line of cut can

be followed easily.

Cutting mode

Pendulum stroke or action provides a more aggressive blade

motion and is designed for cutting soft materials such as wood

or plastic. It provides a faster cut, but with a less smooth cut

across the material. Dependant on model, your jig saw will

have either a Pendulum Stroke dial or an Auto Select dial

to set the pendulum action. Use of these dials is explained

in the next two sections.

Note: Never use pendulum action to cut metal.

Pendulum Stroke dial ( g. E - KS901PE only)

The KS901PE has these four cutting modes with increasing

amounts of pendulum action:

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker KS801SE Kuviosaha. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker KS801SE Kuviosaha käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Kuviosahat
Lisää Kuviosahat käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker KS801SE Kuviosaha

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker KS602E Kuviosaha

Käyttöohje

Black and Decker KS701PEK Kuviosaha

Käyttöohje

Black and Decker KS901SE Kuviosaha

Käyttöohje

Black and Decker KS500 Kuviosaha

Käyttöohje

Black and Decker KS2005EK Kuviosaha

Käyttöohje

Black and Decker KS654PE Kuviosaha

Käyttöohje

Black and Decker KSTR8K Kuviosaha

Käyttöohje

Black and Decker KS999EK Kuviosaha

Aiheeseen liittyvät luokat