Käyttöohje Black and Decker KR603 Iskuporakone

Käyttöohje

4

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for impact drills

◆ Wear ear protectors with impact drills. Exposure to

noise can cause hearing loss.

◆ Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock-on button

3. Forward/reverse slider

4. Drilling mode selector

5. Chuck

6. Depth stop

7. Side handle

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the side handle and depth stop (fig. A)

◆ Turn the grip counterclockwise until you can slide the side

handle (7) onto the front of the tool as shown.

◆ Rotate the side handle into the desired position.

◆ Insert the depth stop (6) into the mounting hole as shown.

◆ Set the drilling depth as described below.

◆ Tighten the side handle by turning the grip clockwise.

Fitting a drill bit or screwdriver bit (fig. B & C)

Keyless chuck with spindle lock (fig. B)

◆ Open the chuck by turning the sleeve (8) counterclockwise.

◆ Insert the bit shaft (9) into the chuck.

◆ Tighten the chuck by turning the sleeve clockwise.

Keyed chuck (fig. C)

◆ Open the chuck by turning the sleeve (10) counterclockwise.

◆ Insert the bit shaft (9) into the chuck.

◆ Insert the chuck key (11) into each hole (12) in the side of

the chuck and turn clockwise until tight.

Removing and refitting the chuck (fig. D)

◆ Open the chuck as far as possible.

◆ Remove the chuck retaining screw, located in the chuck,

by turning it clockwise using a screwdriver.

◆ Tighten an Allen key into the chuck and strike it with a

hammer as shown.

◆ Remove the Allen key.

◆ Remove the chuck by turning it counterclockwise.

◆ To refit the chuck, screw it onto the spindle and secure it

with the chuck retaining screw.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Before drilling into walls, floors or ceilings, check

for the location of wiring and pipes.

Selecting the direction of rotation

For drilling and for tightening screws, use forward (clockwise)

rotation. For loosening screws or removing a jammed drill bit,

use reverse (counterclockwise) rotation.

◆ To select forward rotation, push the forward/reverse

slider (3) to the left.

◆ To select reverse rotation, push the forward/reverse slider

to the right.

Warning! Never change the direction of rotation while the

motor is running.

Selecting the drilling mode

◆ For drilling in masonry, set the drilling mode selector (4) to

the

position.

◆ For drilling in other materials and for screwdriving, set the

drilling mode selector (4) to the

position.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker KR603 Iskuporakone. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker KR603 Iskuporakone käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Iskuporakoneet
Lisää Iskuporakoneet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker KR603 Iskuporakone

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker PS122/H Iskuporakone

Käyttöohje

Black and Decker KR70LSR Iskuporakone

Käyttöohje

Black and Decker BEH550-QS Iskuporakone

Käyttöohje

Black and Decker KD350RE Iskuporakone

Käyttöohje

Black and Decker KR55CRE Iskuporakone

Käyttöohje

Black and Decker KD356RE Iskuporakone

Käyttöohje

Black and Decker KR50RE Iskuporakone

Käyttöohje

Black and Decker KR510 Iskuporakone

Aiheeseen liittyvät luokat