Käyttöohje Black and Decker KA85E Nauhahiomakone

Käyttöohje

4

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

◆ Warning! Contact with or inhalation of dusts arising

from sanding applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Features

1. On/off switch

2. Lock-on button

3. Variable speed control knob (KA85E)

4. Tension lever

5. Dust extraction outlet

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting a sanding belt (fig. A)

Warning! Never use the tool without a sanding belt.

◆ Pull the tension lever (4) outward to release the tension

on the sanding belt (6).

◆ Remove the old sanding belt.

◆ Place a new sanding belt over the rollers. Ensure that the

arrow on the sanding belt points in the same direction as

the arrow on the tool.

◆ To ensure a correct tracking, the sanding belt must be

centred over the rollers.

◆ Push the tension lever (4) inward to tension the sanding

belt.

Fitting and removing the dustbag (fig. B)

◆ Slide the dustbag (7) over the dust extraction outlet (5).

◆ To remove the dustbag, slide it off the outlet.

Use

Warning! Let the tool work at its own pace. Do not overload.

KA85E - Variable speed control (fig. C)

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

◆ Set the control knob (3) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and

for removing paints.

Switching on and off

◆ To switch the tool on, press the on/off switch (1).

◆ For continuous operation, press the lock-on button (2) and

release the on/off switch.

◆ To switch the tool off, release the on/off switch.

To switch the tool off when in continuous operation,

press the on/off switch once more and release it.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

◆ Unzip the bag and empty it before continuing.

Hints for optimum use

◆ Always hold the tool with both hands.

◆ Do not exert too much pressure on the tool.

◆ Regularly check the condition of the sanding belt.

Replace when necessary.

◆ Always sand with the grain of the wood.

◆ When sanding new layers of paint before applying

another layer, use extra fine grit.

◆ On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start

with a medium grit. In both cases, gradually change to a

fine grit for a smooth finish.

◆ Consult your retailer for more information on available

accessories.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker KA85E Nauhahiomakone. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker KA85E Nauhahiomakone käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Nauhahiomakoneet
Lisää Nauhahiomakoneet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker KA85E Nauhahiomakone

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker KA900E Nauhahiomakone

Käyttöohje

Black and Decker KA85 Nauhahiomakone

Käyttöohje

Black and Decker KA83E Nauhahiomakone

Käyttöohje

Black and Decker KA88 Nauhahiomakone

Käyttöohje

Black and Decker KA89E Nauhahiomakone

Käyttöohje

Black and Decker KA75 Nauhahiomakone

Käyttöohje

Black and Decker XTA900E Nauhahiomakone

Käyttöohje

Black and Decker KA83 Nauhahiomakone

Aiheeseen liittyvät luokat