Käyttöohje Black and Decker GT7030 Pensasleikkuri

Tarvitsetko käyttöoppaan Black and Decker GT7030 Pensasleikkuri? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 4 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

4
ENGLISH
English
Intended use
Your Black & Decker hedge trimmer has been designed
for trimming hedges, shrubs and brambles. This tool
is intended for consumer use only.
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow all instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk
of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk
of electric shock.
f. If operating a power tool in a damp location
is unavoidable, use a Residual Current Device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f. Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
!
Lataa käyttöohje suomalainen (PDF, 2.96 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Black and Decker GT7030 Pensasleikkuri arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Black and Decker GT7030 Pensasleikkuri?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Black and Decker GT7030 Pensasleikkuri:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker GT7030 Pensasleikkuri. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker GT7030 Pensasleikkuri käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Black and Decker
Malli GT7030
Kategoria Pensasleikkurit
Tiedostotyyppi PDF
Tiedoston koko 2.96 MB

Kaikki käsikirjat kohteelle Black and Decker Pensasleikkurit
Lisää Pensasleikkurit käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker GT7030 Pensasleikkuri

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Mistä tiedän, että pensasaitajani on tylsä? Todennettu

Kun haaroja vedetään leikkaamisen sijaan, pensasleikkuri on tylsä ​​ja se on teroitettava.

Tästä oli apual (276) Lue lisää

Kuinka teroitan pensasleikkurin terät? Todennettu

Pensasleikkurin terien teroitus on tärkeää työkalun suorituskyvyn ja tehokkuuden ylläpitämiseksi. Terien teroittamiseen tarvitset viilan tai teroituskiven, joka on erityisesti suunniteltu pensasleikkurin terätyypille.

Tästä oli apual (162) Lue lisää

Kuinka voin voidella pensasleikkurin terät? Todennettu

Pensasleikkurin terien voitelu auttaa vähentämään kitkaa ja kulumista, mikä pidentää työkalun käyttöikää. Käytä korkealaatuista, erityisesti pensasleikkureihin suunniteltua voiteluöljyä ja levitä pieni määrä teriä jokaisen käyttökerran jälkeen.

Tästä oli apual (75) Lue lisää

Kuinka voin estää ruosteen muodostumisen pensasleikkurin teriin? Todennettu

Ruoste voi vahingoittaa pensasleikkurin teriä ja lyhentää niiden suorituskykyä ja käyttöikää. Ruosteen estämiseksi puhdista ja kuivaa terät huolellisesti jokaisen käytön jälkeen ja säilytä ne kuivassa, puhtaassa paikassa. Voit myös harkita suojaavan pinnoitteen, kuten öljyn tai ruosteenestoaineen, levittämistä teriin ennen niiden varastointia.

Tästä oli apual (44) Lue lisää
Käyttöohje Black and Decker GT7030 Pensasleikkuri

Liittyvät tuotteet

Aiheeseen liittyvät luokat