Käyttöohje Black and Decker GD300X Sammalenpoistaja-sähköharava

Käyttöohje

7

ENGLISH

Assembling the upper handle (fig. A)

 Make sure that the cable restraint loop is fitted to the

upper handle prior to assembly.

 Fit the lower handle part (7) to the upper handle (6)

using the knobs (10), washers (9) and screws (8)

as shown.

Fitting the lower handle (fig. C)

 Insert the ends of the lower handle (7) into the

corresponding holes in the raker.

 Press the handle down as far as it will go.

 Secure the handle using the screws (12).

Fixing the cable (fig. B)

The motor cable has to be fixed using the cable restraints.

 Clip the one restraint (11) onto the cable leading from

the switchbox (3) to the motor. Secure the restraint to

the lower handle (7).

 Clip the other restraint (11) onto the cable leading from

the switchbox (3) to the motor plug. Secure the restraint

to the upper handle (7).

Warning! Make sure the cable is secured using the cable

restraints prior to connecting the plug to the mains outlet.

Fitting the grass box (fig. D)

 With your lawnraker in its working position, place the

grass box (1) over the lugs at the front of the lawnraker.

Height of rake adjustment (fig. E)

There are three raking height positions on your raker; low,

medium and high. These are selected by altering the

position of the three-position height adjuster located on the

rear roller (13).

 Press the lock button on the three-position height

adjuster and rotate the adjuster to any of the three

available positions as shown in Fig. E. On reaching the

required position, release the lock button and allow it to

engage in your raker body (2).

 The three positions are identified by markings on the

side of your raker body as shown in Fig. E.

The three raking height positions are as follows:

 Lowest setting (1). This setting should be used when

you wish to give the lawn a particularly vigorous raking.

On this setting, your raker will remove all the debris and

thatch that has collected at the base of your grass. It will

also remove moss and weeds on this setting.

 Medium setting (2). This setting should be used when

you wish to give your lawn a moderate raking. This

setting will be suitable for the majority of lawns.

 Highest setting (3). This setting will lightly rake and

sweep your lawn. Your raker can also be used on this

setting to ‘lift’ flattened grass and stolons (the creeping

stems of grasses and weeds like clover) so that you can

mow them. The sweep/light rake setting is ideal for

fallen leaves and for collecting grass cuttings which

have been left on the lawn after mowing.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Switching on and off

Switching on

 Hold the handle with both hands and tilt it slightly

downwards to raise the front of the appliance.

 Press the lock-off button (4) and pull the switch lever (5)

towards you.

 Release the lock-off button (4).

 Let the appliance return to its working position.

Switching off

 To switch the appliance off, release the switch lever (5).

Never attempt to lock a switch in the on position.

Warning! Let the appliance work at its own pace. Do not

overload.

To look after a lawn properly, you need to do more than just

mow it once a week throughout the Summer. The lawn will

benefit from a vigorous raking of the grass to remove the

dead matter, moss and weed which disfigures a lawn. The

build up of dead grass provides a mat of absorbent fibres

which prevents water getting through to the ground and

if this mat is kept waterlogged, it can encourage grass

diseases and prevent healthy grasses taking root.

 Place the bulk of the extension cable on the lawn close

to the starting point (Fig. F, position 1).

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker GD300X Sammalenpoistaja-sähköharava. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker GD300X Sammalenpoistaja-sähköharava käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Sammalenpoistaja-sähköharavat
Lisää Sammalenpoistaja-sähköharavat käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker GD300X Sammalenpoistaja-sähköharava

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker GD300 Sammalenpoistaja-sähköharava

Käyttöohje

Black and Decker GD300-QS Sammalenpoistaja-sähköharava

Käyttöohje

Black and Decker GD200 Sammalenpoistaja-sähköharava

Käyttöohje

Einhell GC-SC 18/28 Li Sammalenpoistaja-sähköharava

Käyttöohje

Stiga XSE 32 Sammalenpoistaja-sähköharava

Käyttöohje

Makita UV3600 Sammalenpoistaja-sähköharava

Käyttöohje

Wolf Garten Ambition V303 E Sammalenpoistaja-sähköharava

Käyttöohje

Stiga SVP 40 B Sammalenpoistaja-sähköharava

Aiheeseen liittyvät luokat