Käyttöohje Black and Decker CD14C Porakone-ruuvinväännin

Käyttöohje

3

ENGLISH

Intended use

Your Black & Decker drill/screwdriver has been designed for

screwdriving applications and for drilling in wood, metal and

plastics.

This tool is intended for consumer use only.

Your Black & Decker charger has been designed for charging

Black & Decker batteries of the type supplied with this tool.

Safety instructions

◆ Warning! When using battery-powered tools, basic

safety precautions, including the following, should always

be followed to reduce the risk of fire, leaking batteries,

personal injury and material damage.

◆ Read all of this manual carefully before operating the tool.

◆ Retain this manual for future reference.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool.

Dress properly

Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear rubber gloves and

non-slip footwear when working outdoors. Wear protective

hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever

the operations may produce dust or flying particles.

Hearing protection should be worn.

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it

frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction

and collection facilities, ensure that these are connected and

properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed

from the tool before operating the tool.

Use appropriate tool

The intended use is described in this instruction manual.

Do not force small tools or attachments to do the job of a

heavy-duty tool. The tool will do the job better and safer at the

rate for which it was intended. Do not force the tool.

Warning! The use of any accessory or attachment or performance

of any operation with this tool other than those recommended

in this instruction manual may present a risk of personal injury.

Check for damaged parts

Before use, carefully check the tool for damage. Check for

misalignment and seizure of moving parts, breakage of parts,

damage to guards and switches and any other conditions that

may affect its operation. Ensure that the tool will operate

properly and perform its intended function. Do not use the tool

if any part is damaged or defective. Do not use the tool if the

switch does not turn it on and off. Have any damaged or

defective parts repaired or replaced by an authorised repair

agent. Never attempt any repairs yourself.

Remove the battery

Where the design permits, remove the battery when the tool

is not in use, before changing any parts of the tool,

accessories or attachments and before servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch.

Be sure that the tool is switched off when inserting the battery

into the tool.

Do not abuse cord

Never carry the charger by its cord or pull it to disconnect from

the socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools, batteries and chargers should be stored

in a dry, locked up or high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow the instructions for maintenance and

changing accessories. Keep handles and switches dry, clean

and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

Additional safety instructions for batteries and chargers

Batteries

◆ Never attempt to open for any reason.

◆ Do not expose the battery to water.

◆ Do not store in locations where the temperature may

exceed 40 °C.

◆ Charge only at ambient temperatures between 4 °C and

40 °C.

◆ Charge only using the charger provided with the tool.

Arviointi

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Black and Decker CD14C Porakone-ruuvinväännin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Black and Decker. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Black and Decker CD14C Porakone-ruuvinväännin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Kaikki käsikirjat kohteelle Black and Decker Porakone-ruuvinvääntimet
Lisää Porakone-ruuvinvääntimet käsikirjoja

Usein kysytyt kysymykset kohteesta Black and Decker CD14C Porakone-ruuvinväännin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Liittyvät tuotteet

Käyttöohje

Black and Decker KC2002F Porakone-ruuvinväännin

Käyttöohje

Black and Decker ASL188 Porakone-ruuvinväännin

Käyttöohje

Black and Decker KC9651 Porakone-ruuvinväännin

Käyttöohje

Black and Decker CL14 Porakone-ruuvinväännin

Käyttöohje

Black and Decker HP188F4LBK Porakone-ruuvinväännin

Käyttöohje

Black and Decker CL12 Porakone-ruuvinväännin

Käyttöohje

Black and Decker HP146F4LBK Porakone-ruuvinväännin

Käyttöohje

Black and Decker EPC126 Porakone-ruuvinväännin

Aiheeseen liittyvät luokat