Käyttöohje Bionaire BOH2001W Lämmitin

Tarvitsetko käyttöoppaan Bionaire BOH2001W Lämmitin? Alta voit katsoa ja ladata suomenkielisen PDF-oppaan ilmaiseksi. Tällä tuotteella on tällä hetkellä 2 usein kysyttyä kysymystä, 0 kommenttia ja 0 ääntä. Jos tämä ei ole haluamasi käyttöopas, ota meihin yhteyttä.

Onko tuotteessa vika, eikä käyttöoppaasta ole apua? Siirry Repair Café ‑alueelle etsimään ilmaisia korjauspalveluita.

Käyttöohje

Loading…

2 3
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:
1. Before connecting the heater, check that the
voltage indicated on the rating plate
corresponds to the main voltage in your
home/office.
2. WARNING: In order to avoid overheating,
do not cover the heater ( ) Reference to
product.
3. DO NOT position the heater directly under a
power socket.
4. DO NOT use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
5. If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or similarly qualified person in order to
avoid hazard. The heater contains no user
serviceable parts. Should the product suffer
damage or breakdown, it must be returned to
the manufacturer or their service agent.
6. Under the environment with electrical fast
transient, the product may malfunction.
7. DO NOT use this heater with a
programmer, timer or any other device
that switches the heater on automatically,
since a fire risk exists if the heater is
covered or positioned incorrectly.
8. Only touch the heater with dry hands.
9. DO NOT use this heater outdoors.
10. DO NOT position where it can be touched by
children, especially the very young.
11. Allow a safe area around the heater away
from furniture or other objects; at least 50
cm from the top and sides and 200 cm at
the front. The heater is to be placed at least
3m from water source.
12. DO NOT use this heater when it is lying on
its side.
13. DO NOT use the heater in rooms with
explosive gas (e.g. petrol) or while using,
oxygen, inflammable glue or solvent (e.g.
when gluing or varnishing parquet floors,
PVC etc.)
14. DO NOT insert any objects into the heater.
15. Keep the mains cord at a safe distance from
the main body of the heater.
16. If overheating should occur, the built-in
overheating safety device will switch off
the heater.
17. DO NOT place the cord under a rug.
18. The heater cannot be used adjacent to
curtains or combustible material. Curtains or
combustible material may be burned if the
heater was installed incorrectly.
19. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
20. This heater is filled with a precise quantity of
special oil. Repairs requiring opening of the
oil container are only to be made by the
manufacturer or his service agent who
should be contacted if there is an oil leak;
21 when scrapping the heater, follow the
regulations concerning the disposal of oil.
DESCRIPTIONS (See Fig. 1, 2 & 3)
A. Heated Fins
B. Vents
C. Handle
D. Front Panel
E. Cord Storage
F. Power Cord
G. Front Stand
H. Control Knob
I. Power Light
J. Thermostat Knob
K. Q Shape Screw
L. Casters
M.Foot Plate
N. Wing Nut
O. U-bolt
Technical Specifications
BOH1501/W
Wattage: 1500W
BOH2001/W
Wattage: 2000W
ASSEMBLY INSTRUCTIONS (See Fig. 3)
Please make sure the heater has not been
plugged into any electricity outlet.
Carefully remove heater from box. Some
acessories are packed internally. Please make
sure you have all of the following acessories
prior to throwing away packaging.
1 Foot Plate with 2 casters (M&L), 1 Front Stand (G),
and 1 Q shape Screw (K) and 1 Wing Nut (N).
Note: This unit is for FLOOR USE ONLY.
1. Turn the heater upside down and you will see
one U-bolt (O) with wing nut over the last joint
of the heater.
ENGLISH
2. Unscrew the wing nut (N) from the U-bolt (O).
3. Place one hole of the foot plate (M) to the L
shape of the U-bolt (O) and the other hole of
the foot plate into the other end of the U-bolt,
then screw on the wing nut (N).
4. Place the front stand (G) on the bottom of the
radiators front panel, and secure it with the Q
shape screw (K). This front stand (G) is not
meant to be removed once it is attached to
the bottom of the unit.
5. After installation of the front stand (G) and foot
plate (M) with casters (L) turn the heater the
right way up: the heater is now ready for use.
OPERATING INSTRUCTIONS
(See Fig. 1&2)
1. Set the unit to the OFF (O) position.
2. Plug in heater. The Power Light (I) will
illuminate and remain lit until the heater
is unplugged.
3. Set the Thermostat Knob (J) all the way to
the right.
4. Turn the Control Knob (H) to desired level of heat.
NOTE: When the heater is in use, it is
normal that the heater cycles ON and OFF,
this is to maintain your desired temperature.
After using the heater, turn the Control Knob (H)
to “0” position, turn the Thermostat Knob (J) to
lowest temperature position and unplug the
heater from the socket.
Turn the Control Knob to desired heat setting.
BOH1501/W: 1 -600W, 2 -900W, 3-1500W
BOH2001/W: 1 -800W, 2 -1200W, 3 -2000W
SETTING THE THERMOSTAT
1. Set the Thermostat control all the way to max.
2. When the desired temperature/comfort level is
reached, turn the thermostat control
anti-clockwise to lower position or until the
heater stops operating.
3. The control will now automatically maintain
the pre-set temperature level by turning the
heater ON and OFF.
NOTE: The Power light will remain lit during
operation.
NOTE: It is normal for the heater to cycle ON
and OFF as it maintains the preset
temperature.
ANTI-FROST GUARD INSTRUCTION
If you plug in the heater, it will start working at the
lowest temperature setting (When thermostat
control is in the lowest temperature position, the
temperature will be maintained at 5° C, thus the
heater will be in the off status unless the room
temperature is lower than 5° C. If the room
temperature is lower than 5° C, the heater will
automatically start working and will keep turning
on & off all the time, maintaining its ambient
temperature of 5° C.
NOTE: Unit must be unplugged for it to be
fully off
TIP OVER PROTECTION
When the unit is accidentally knocked over, or
tilts on one side at more than a 45° angle; it
will instantly shut off. To reset, simply place the
heater in an upright position.
STORAGE TIPS
If the heater is not required for long periods, for
example during the summer, it should be stored
at room temperature; in a dry place and
preferably covered to prevent the accumulation
of dust and dirt.
FITTING A REPLACEMENT PLUG FOR
U.K. AND IRELAND ONLY.
If the plug is not suitable for the socket outlets in
your home, it can be removed and replaced by a
plug of the correct type. For correct type and
correct installation please refer to "Installation of
a plug" below.
INSTALLATION OF A PLUG Applicable to
U.K. and Ireland.
NOTE: If you are in any doubt about wiring
and the installation of the plug. Please
contact a qualified electrician.
NOTE: If a 13A 3-pin plug is fitted, it must be
an ASTA approved plug, conforming to the
BS1363 standard. Replacement 13 amp fuse
must also be BSI or ASTA approved.
The wires in this mains lead are coloured as such:
GREEN & YELLOW - Earth
BROWN - Live
BLUE - Neutral
Please note that the colour of these mains wires
may not correspond with the colour markings
that identify the terminals in your plug.
BOH1501-I_IB_REV.qxd:BPH1515I06MLM1.qxd 3/19/09 11:55 AM Page 2
Lataa käyttöohje suomalainen (PDF, 0.98 MB)
(Mieti ympäristöä ja tulosta tämä käyttöopas vain, jos se on todella tarpeen)

Loading…

Arviointi

Kerro meille mielipiteesi Bionaire BOH2001W Lämmitin arvioimalla tuote. Haluatko jakaa tuotekokemuksesi tai kysyä kysymyksen? Jätä kommentti sivun alalaidassa.
Oletko tyytyväinen kohteeseen Bionaire BOH2001W Lämmitin?
Kyllä Ei
Arvostele tuote ensimmäisenä
0 äänet

Keskustele tuotteesta

Täällä voit jakaa mielipiteesi Bionaire BOH2001W Lämmitin:sta. Jos sinulla on kysyttävää, lue ensin huolellisesti käyttöohje. Käsikirjaa voi pyytää yhteydenottolomakkeellamme.

Lisää tästä ohjekirjasta

Ymmärrämme, että on mukavaa, että sinulla on paperikäyttöinen käyttöopas laitteellesi Bionaire BOH2001W Lämmitin. Voit aina ladata oppaan verkkosivuiltamme ja tulostaa sen itse. Jos haluat alkuperäisen käyttöoppaan, suosittelemme ottamaan yhteyttä osoitteeseen Bionaire. He saattavat pystyä toimittamaan alkuperäisen ohjekirjan. Etsitkö laitteen Bionaire BOH2001W Lämmitin käyttöopasta toisella kielellä? Valitse haluamasi kieli kotisivuiltamme ja etsi mallinumero nähdäksesi, onko sitä saatavilla.

Tekniset tiedot

Tuotemerkki Bionaire
Malli BOH2001W
Kategoria Lämmittimet
Tiedostotyyppi PDF
Tiedoston koko 0.98 MB

Kaikki käsikirjat kohteelle Bionaire Lämmittimet
Lisää Lämmittimet käsikirjoja

Usein kysytyt kysymykset kohteesta Bionaire BOH2001W Lämmitin

Tukitiimimme etsii hyödyllisiä tuotetietoja ja vastaa yleisiin kysymyksiin. Jos huomaat yleisissä kysymyksissä virheen, kerro siitä meille yhteydenottolomakkeella.

Miten pöly vaikuttaa lämmittimen tehokkuuteen? Todennettu

Pölyä voi kerääntyä lämmittimen lämmityselementteihin ja ilmansuodattimiin, mikä heikentää sen tehokkuutta. Tämä voi saada lämmittimen työskentelemään kovemmin tuottaakseen saman määrän lämpöä, mikä lisää energiankulutusta ja korkeampia sähkölaskuja. Säilyttääksesi lämmittimesi tehokkuuden, muista puhdistaa se säännöllisesti ja vaihtaa ilmansuodatin tarvittaessa.

Tästä oli apual (106) Lue lisää

Kuinka määritän huoneeseen tarvitseman lämmittimen koon? Todennettu

Huoneeseen tarvitsemasi kiukaan koko riippuu huoneen koosta ja tilan eristyksestä. Yleinen nyrkkisääntö on käyttää 60 wattia neliömetriä kohden. Esimerkiksi, jos huone on kooltaan 14 neliömetriä, 840 watin lämmitin olisi sopiva.

Tästä oli apual (62) Lue lisää
Käyttöohje Bionaire BOH2001W Lämmitin

Liittyvät tuotteet

Aiheeseen liittyvät luokat